Difference between revisions of "Smartctl"

From wikieduonline
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
  
 +
 +
apt install [[smartmontools]]
  
 
<pre>
 
<pre>
Line 14: Line 16:
  
 
  smartctl -a /dev/sda  
 
  smartctl -a /dev/sda  
 +
 +
<pre>
 +
smartctl -a /dev/sdb
 +
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-122-generic] (local build)
 +
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
 +
 +
=== START OF INFORMATION SECTION ===
 +
Device Model:    QEMU HARDDISK
 +
Serial Number:    QM00003
 +
Firmware Version: 2.5+
 +
User Capacity:    26,843,545,600 bytes [26.8 GB]
 +
Sector Size:      512 bytes logical/physical
 +
Device is:        Not in smartctl database [for details use: -P showall]
 +
ATA Version is:  ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000
 +
Local Time is:    Sun Oct 25 06:00:24 2020 UTC
 +
SMART support is: Available - device has SMART capability.
 +
SMART support is: Enabled
 +
 +
=== START OF READ SMART DATA SECTION ===
 +
SMART overall-health self-assessment test result: PASSED
 +
 +
General SMART Values:
 +
Offline data collection status:  (0x82) Offline data collection activity
 +
was completed without error.
 +
Auto Offline Data Collection: Enabled.
 +
Self-test execution status:      (  0) The previous self-test routine completed
 +
without error or no self-test has ever
 +
been run.
 +
Total time to complete Offline
 +
data collection: (  288) seconds.
 +
Offline data collection
 +
capabilities: (0x19) SMART execute Offline immediate.
 +
No Auto Offline data collection support.
 +
Suspend Offline collection upon new
 +
command.
 +
Offline surface scan supported.
 +
Self-test supported.
 +
No Conveyance Self-test supported.
 +
No Selective Self-test supported.
 +
SMART capabilities:            (0x0003) Saves SMART data before entering
 +
power-saving mode.
 +
Supports SMART auto save timer.
 +
Error logging capability:        (0x01) Error logging supported.
 +
No General Purpose Logging support.
 +
Short self-test routine
 +
recommended polling time: (  2) minutes.
 +
Extended self-test routine
 +
recommended polling time: (  54) minutes.
 +
 +
SMART Attributes Data Structure revision number: 1
 +
Vendor Specific SMART Attributes with Thresholds:
 +
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
 +
  1 Raw_Read_Error_Rate    0x0003  100  100  006    Pre-fail  Always      -      0
 +
  3 Spin_Up_Time            0x0003  100  100  000    Pre-fail  Always      -      16
 +
  4 Start_Stop_Count        0x0002  100  100  020    Old_age  Always      -      100
 +
  5 Reallocated_Sector_Ct  0x0003  100  100  036    Pre-fail  Always      -      0
 +
  9 Power_On_Hours          0x0003  100  100  000    Pre-fail  Always      -      1
 +
12 Power_Cycle_Count      0x0003  100  100  000    Pre-fail  Always      -      0
 +
190 Airflow_Temperature_Cel 0x0003  069  069  050    Pre-fail  Always      -      31 (Min/Max 31/31)
 +
 +
SMART Error Log Version: 1
 +
No Errors Logged
 +
 +
SMART Self-test log structure revision number 1
 +
No self-tests have been logged.  [To run self-tests, use: smartctl -t]
 +
 +
Selective Self-tests/Logging not supported
 +
</pre>
 +
 +
  
  

Latest revision as of 06:01, 25 October 2020


apt install smartmontools

smartctl
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-96-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

ERROR: smartctl requires a device name as the final command-line argument.


Use smartctl -h to get a usage summary



smartctl -a /dev/sda 

smartctl -a /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-122-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     QEMU HARDDISK
Serial Number:    QM00003
Firmware Version: 2.5+
User Capacity:    26,843,545,600 bytes [26.8 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000
Local Time is:    Sun Oct 25 06:00:24 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		(  288) seconds.
Offline data collection
capabilities: 			 (0x19) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  54) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0003   100   100   006    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   100   100   000    Pre-fail  Always       -       16
  4 Start_Stop_Count        0x0002   100   100   020    Old_age   Always       -       100
  5 Reallocated_Sector_Ct   0x0003   100   100   036    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0003   100   100   000    Pre-fail  Always       -       1
 12 Power_Cycle_Count       0x0003   100   100   000    Pre-fail  Always       -       0
190 Airflow_Temperature_Cel 0x0003   069   069   050    Pre-fail  Always       -       31 (Min/Max 31/31)

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported



See also[edit]

Retrieved from "https://www.wikieduonline.com/index.php?title=Smartctl&oldid=40169"

Advertising: