Difference between revisions of "Wpa cli"

From wikieduonline
Jump to navigation Jump to search
Tags: Mobile web edit, Mobile edit
Line 8: Line 8:
 
  wpa_cli -i wlp6s0 scan_results
 
  wpa_cli -i wlp6s0 scan_results
 
  bssid / frequency / signal level / flags / ssid
 
  bssid / frequency / signal level / flags / ssid
 +
 +
<pre>
 +
wpa_cli help
 +
Selected interface 'p2p-dev-wlp6s0'
 +
commands:
 +
  status [verbose] = get current WPA/EAPOL/EAP status
 +
  ifname = get current interface name
 +
  ping = pings wpa_supplicant
 +
  relog = re-open log-file (allow rolling logs)
 +
  note <text> = add a note to wpa_supplicant debug log
 +
  mib = get MIB variables (dot1x, dot11)
 +
  help [command] = show usage help
 +
  interface [ifname] = show interfaces/select interface
 +
  level <debug level> = change debug level
 +
  license = show full wpa_cli license
 +
  quit = exit wpa_cli
 +
  set = set variables (shows list of variables when run without arguments)
 +
  dump = dump config variables
 +
  get <name> = get information
 +
  driver_flags = list driver flags
 +
  logon = IEEE 802.1X EAPOL state machine logon
 +
  logoff = IEEE 802.1X EAPOL state machine logoff
 +
  pmksa = show PMKSA cache
 +
  pmksa_flush = flush PMKSA cache entries
 +
  pmksa_get <network_id> = fetch all stored PMKSA cache entries
 +
  pmksa_add <network_id> <BSSID> <PMKID> <PMK> <reauth_time in seconds> <expiration in seconds> <akmp> <opportunistic> = store PMKSA cache entry from external storage
 +
  reassociate = force reassociation
 +
  reattach = force reassociation back to the same BSS
 +
  preauthenticate <BSSID> = force preauthentication
 +
  identity <network id> <identity> = configure identity for an SSID
 +
  password <network id> <password> = configure password for an SSID
 +
  new_password <network id> <password> = change password for an SSID
 +
  pin <network id> <pin> = configure pin for an SSID
 +
  otp <network id> <password> = configure one-time-password for an SSID
 +
  psk_passphrase <network id> <PSK/passphrase> = configure PSK/passphrase for an SSID
 +
  passphrase <network id> <passphrase> = configure private key passphrase
 +
    for an SSID
 +
  sim <network id> <pin> = report SIM operation result
 +
  bssid <network id> <BSSID> = set preferred BSSID for an SSID
 +
  blacklist <BSSID> = add a BSSID to the blacklist
 +
  blacklist clear = clear the blacklist
 +
  blacklist = display the blacklist
 +
  log_level <level> [<timestamp>] = update the log level/timestamp
 +
  log_level = display the current log level and log options
 +
  list_networks = list configured networks
 +
  select_network <network id> = select a network (disable others)
 +
  enable_network <network id> = enable a network
 +
  disable_network <network id> = disable a network
 +
  add_network = add a network
 +
  remove_network <network id> = remove a network
 +
  set_network <network id> <variable> <value> = set network variables (shows
 +
    list of variables when run without arguments)
 +
  get_network <network id> <variable> = get network variables
 +
  dup_network <src network id> <dst network id> <variable> = duplicate network variables
 +
  list_creds = list configured credentials
 +
  add_cred = add a credential
 +
  remove_cred <cred id> = remove a credential
 +
  set_cred <cred id> <variable> <value> = set credential variables
 +
  get_cred <cred id> <variable> = get credential variables
 +
  save_config = save the current configuration
 +
  disconnect = disconnect and wait for reassociate/reconnect command before
 +
    connecting
 +
  reconnect = like reassociate, but only takes effect if already disconnected
 +
  scan = request new BSS scan
 +
  scan_results = get latest scan results
 +
  abort_scan = request ongoing scan to be aborted
 +
  bss <<idx> | <bssid>> = get detailed scan result info
 +
  get_capability <eap/pairwise/group/key_mgmt/proto/auth_alg/channels/freq/modes> = get capabilities
 +
  reconfigure = force wpa_supplicant to re-read its configuration file
 +
  terminate = terminate wpa_supplicant
 +
  interface_add <ifname> <confname> <driver> <ctrl_interface> <driver_param>
 +
    <bridge_name> <create> <type> = adds new interface, all parameters but
 +
    <ifname> are optional. Supported types are station ('sta') and AP ('ap')
 +
  interface_remove <ifname> = removes the interface
 +
  interface_list = list available interfaces
 +
  ap_scan <value> = set ap_scan parameter
 +
  scan_interval <value> = set scan_interval parameter (in seconds)
 +
  bss_expire_age <value> = set BSS expiration age parameter
 +
  bss_expire_count <value> = set BSS expiration scan count parameter
 +
  bss_flush <value> = set BSS flush age (0 by default)
 +
  ft_ds <addr> = request over-the-DS FT with <addr>
 +
  wps_pbc [BSSID] = start Wi-Fi Protected Setup: Push Button Configuration
 +
  wps_pin <BSSID> [PIN] = start WPS PIN method (returns PIN, if not hardcoded)
 +
  wps_check_pin <PIN> = verify PIN checksum
 +
  wps_cancel Cancels the pending WPS operation
 +
  wps_nfc [BSSID] = start Wi-Fi Protected Setup: NFC
 +
  wps_nfc_config_token <WPS|NDEF> = build configuration token
 +
  wps_nfc_token <WPS|NDEF> = create password token
 +
  wps_nfc_tag_read <hexdump of payload> = report read NFC tag with WPS data
 +
  nfc_get_handover_req <NDEF> <WPS> = create NFC handover request
 +
  nfc_get_handover_sel <NDEF> <WPS> = create NFC handover select
 +
  nfc_report_handover <role> <type> <hexdump of req> <hexdump of sel> = report completed NFC handover
 +
  wps_reg <BSSID> <AP PIN> = start WPS Registrar to configure an AP
 +
  wps_ap_pin [params..] = enable/disable AP PIN
 +
  wps_er_start [IP address] = start Wi-Fi Protected Setup External Registrar
 +
  wps_er_stop = stop Wi-Fi Protected Setup External Registrar
 +
  wps_er_pin <UUID> <PIN> = add an Enrollee PIN to External Registrar
 +
  wps_er_pbc <UUID> = accept an Enrollee PBC using External Registrar
 +
  wps_er_learn <UUID> <PIN> = learn AP configuration
 +
  wps_er_set_config <UUID> <network id> = set AP configuration for enrolling
 +
  wps_er_config <UUID> <PIN> <SSID> <auth> <encr> <key> = configure AP
 +
  wps_er_nfc_config_token <WPS/NDEF> <UUID> = build NFC configuration token
 +
  ibss_rsn <addr> = request RSN authentication with <addr> in IBSS
 +
  sta <addr> = get information about an associated station (AP)
 +
  all_sta = get information about all associated stations (AP)
 +
  list_sta = list all stations (AP)
 +
  deauthenticate <addr> = deauthenticate a station
 +
  disassociate <addr> = disassociate a station
 +
  chan_switch <cs_count> <freq> [sec_channel_offset=] [center_freq1=] [center_freq2=] [bandwidth=] [blocktx] [ht|vht] = CSA parameters
 +
  suspend = notification of suspend/hibernate
 +
  resume = notification of resume/thaw
 +
  roam <addr> = roam to the specified BSS
 +
  p2p_find [timeout] [type=*] = find P2P Devices for up-to timeout seconds
 +
  p2p_stop_find = stop P2P Devices search
 +
  p2p_asp_provision <addr> adv_id=<adv_id> conncap=<conncap> [info=<infodata>] = provision with a P2P ASP Device
 +
  p2p_asp_provision_resp <addr> adv_id=<adv_id> [role<conncap>] [info=<infodata>] = provision with a P2P ASP Device
 +
  p2p_connect <addr> <"pbc"|PIN> [ht40] = connect to a P2P Device
 +
  p2p_listen [timeout] = listen for P2P Devices for up-to timeout seconds
 +
  p2p_group_remove <ifname> = remove P2P group interface (terminate group if GO)
 +
  p2p_group_add [ht40] = add a new P2P group (local end as GO)
 +
  p2p_group_member <dev_addr> = Get peer interface address on local GO using peer Device Address
 +
  p2p_prov_disc <addr> <method> = request provisioning discovery
 +
  p2p_get_passphrase = get the passphrase for a group (GO only)
 +
  p2p_serv_disc_req <addr> <TLVs> = schedule service discovery request
 +
  p2p_serv_disc_cancel_req <id> = cancel pending service discovery request
 +
  p2p_serv_disc_resp <freq> <addr> <dialog token> <TLVs> = service discovery response
 +
  p2p_service_update = indicate change in local services
 +
  p2p_serv_disc_external <external> = set external processing of service discovery
 +
  p2p_service_flush = remove all stored service entries
 +
  p2p_service_add <bonjour|upnp|asp> <query|version> <response|service> = add a local service
 +
  p2p_service_rep asp <auto> <adv_id> <svc_state> <svc_string> [<svc_info>] = replace local ASP service
 +
  p2p_service_del <bonjour|upnp> <query|version> [|service] = remove a local service
 +
  p2p_reject <addr> = reject connection attempts from a specific peer
 +
  p2p_invite <cmd> [peer=addr] = invite peer
 +
  p2p_peers [discovered] = list known (optionally, only fully discovered) P2P peers
 +
  p2p_peer <address> = show information about known P2P peer
 +
  p2p_set <field> <value> = set a P2P parameter
 +
  p2p_flush = flush P2P state
 +
  p2p_cancel = cancel P2P group formation
 +
  p2p_unauthorize <address> = unauthorize a peer
 +
  p2p_presence_req [<duration> <interval>] [<duration> <interval>] = request GO presence
 +
  p2p_ext_listen [<period> <interval>] = set extended listen timing
 +
  p2p_remove_client <address|iface=address> = remove a peer from all groups
 +
  vendor_elem_add <frame id> <hexdump of elem(s)> = add vendor specific IEs to frame(s)
 +
    0: Probe Req (P2P), 1: Probe Resp (P2P) , 2: Probe Resp (GO), 3: Beacon (GO), 4: PD Req, 5: PD Resp, 6: GO Neg Req, 7: GO Neg Resp, 8: GO Neg Conf, 9: Inv Req, 10: Inv Resp, 11: Assoc Req (P2P), 12: Assoc Resp (P2P)
 +
  vendor_elem_get <frame id> = get vendor specific IE(s) to frame(s)
 +
    0: Probe Req (P2P), 1: Probe Resp (P2P) , 2: Probe Resp (GO), 3: Beacon (GO), 4: PD Req, 5: PD Resp, 6: GO Neg Req, 7: GO Neg Resp, 8: GO Neg Conf, 9: Inv Req, 10: Inv Resp, 11: Assoc Req (P2P), 12: Assoc Resp (P2P)
 +
  vendor_elem_remove <frame id> <hexdump of elem(s)> = remove vendor specific IE(s) in frame(s)
 +
    0: Probe Req (P2P), 1: Probe Resp (P2P) , 2: Probe Resp (GO), 3: Beacon (GO), 4: PD Req, 5: PD Resp, 6: GO Neg Req, 7: GO Neg Resp, 8: GO Neg Conf, 9: Inv Req, 10: Inv Resp, 11: Assoc Req (P2P), 12: Assoc Resp (P2P)
 +
  wfd_subelem_set <subelem> [contents] = set Wi-Fi Display subelement
 +
  wfd_subelem_get <subelem> = get Wi-Fi Display subelement
 +
  fetch_anqp = fetch ANQP information for all APs
 +
  stop_fetch_anqp = stop fetch_anqp operation
 +
  interworking_select [auto] = perform Interworking network selection
 +
  interworking_connect <BSSID> = connect using Interworking credentials
 +
  interworking_add_network <BSSID> = connect using Interworking credentials
 +
  anqp_get <addr> <info id>[,<info id>]... = request ANQP information
 +
  gas_request <addr> <AdvProtoID> [QueryReq] = GAS request
 +
  gas_response_get <addr> <dialog token> [start,len] = Fetch last GAS response
 +
  hs20_anqp_get <addr> <subtype>[,<subtype>]... = request HS 2.0 ANQP information
 +
  nai_home_realm_list <addr> <home realm> = get HS20 nai home realm list
 +
  hs20_icon_request <addr> <icon name> = get Hotspot 2.0 OSU icon
 +
  fetch_osu = fetch OSU provider information from all APs
 +
  cancel_fetch_osu = cancel fetch_osu command
 +
  sta_autoconnect <0/1> = disable/enable automatic reconnection
 +
  tdls_discover <addr> = request TDLS discovery with <addr>
 +
  tdls_setup <addr> = request TDLS setup with <addr>
 +
  tdls_teardown <addr> = tear down TDLS with <addr>
 +
  tdls_link_status <addr> = TDLS link status with <addr>
 +
  wmm_ac_addts <uplink/downlink/bidi> <tsid=0..7> <up=0..7> [nominal_msdu_size=#] [mean_data_rate=#] [min_phy_rate=#] [sba=#] [fixed_nominal_msdu] = add WMM-AC traffic stream
 +
  wmm_ac_delts <tsid> = delete WMM-AC traffic stream
 +
  wmm_ac_status = show status for Wireless Multi-Media Admission-Control
 +
  tdls_chan_switch <addr> <oper class> <freq> [sec_channel_offset=] [center_freq1=] [center_freq2=] [bandwidth=] [ht|vht] = enable channel switching with TDLS peer
 +
  tdls_cancel_chan_switch <addr> = disable channel switching with TDLS peer <addr>
 +
  signal_poll = get signal parameters
 +
  signal_monitor = set signal monitor parameters
 +
  pktcnt_poll = get TX/RX packet counters
 +
  reauthenticate = trigger IEEE 802.1X/EAPOL reauthentication
 +
  autoscan [params] = Set or unset (if none) autoscan parameters
 +
  raw <params..> = Sent unprocessed command
 +
  flush = flush wpa_supplicant state
 +
  radio_work = radio_work <show/add/done>
 +
  vendor <vendor id> <command id> [<hex formatted command argument>] = Send vendor command
 +
  neighbor_rep_request [ssid=<SSID>] [lci] [civic] = Trigger request to AP for neighboring AP report (with optional given SSID in hex or enclosed in double quotes, default: current SSID; with optional LCI and location civic request)
 +
  erp_flush = flush ERP keys
 +
  mac_rand_scan <scan|sched|pno|all> enable=<0/1> [addr=mac-address mask=mac-address-mask] = scan MAC randomization
 +
  get_pref_freq_list <interface type> = retrieve preferred freq list for the specified interface type
 +
  p2p_lo_start <freq> <period> <interval> <count> = start P2P listen offload
 +
  p2p_lo_stop = stop P2P listen offload
 +
  dpp_qr_code report a scanned DPP URI from a QR Code
 +
  dpp_bootstrap_gen type=<qrcode> [chan=..] [mac=..] [info=..] [curve=..] [key=..] = generate DPP bootstrap information
 +
  dpp_bootstrap_remove *|<id> = remove DPP bootstrap information
 +
  dpp_bootstrap_get_uri <id> = get DPP bootstrap URI
 +
  dpp_bootstrap_info <id> = show DPP bootstrap information
 +
  dpp_auth_init peer=<id> [own=<id>] = initiate DPP bootstrapping
 +
  dpp_listen <freq in MHz> = start DPP listen
 +
  dpp_stop_listen = stop DPP listen
 +
  dpp_configurator_add [curve=..] [key=..] = add DPP configurator
 +
  dpp_configurator_remove *|<id> = remove DPP configurator
 +
  dpp_configurator_get_key <id> = Get DPP configurator's private key
 +
  dpp_configurator_sign conf=<role> configurator=<id> = generate self DPP configuration
 +
  dpp_pkex_add add PKEX code
 +
  dpp_pkex_remove *|<id> = remove DPP pkex information
 +
</pre>
 +
  
 
== See also ==
 
== See also ==
 
* {{iw}}
 
* {{iw}}
 +
* {{wifi}}
 +
 +
[[Category:WiFi]]

Revision as of 12:35, 1 December 2020

wpa_cli -i wlp6s0 list_sta
wpa_cli -i wlp6s0 all_sta

wpa_cli -I wlp6s0 log_level debug 



wpa_cli -i wlp6s0 scan_results
bssid / frequency / signal level / flags / ssid

wpa_cli help
Selected interface 'p2p-dev-wlp6s0'
commands:
  status [verbose] = get current WPA/EAPOL/EAP status
  ifname = get current interface name
  ping = pings wpa_supplicant
  relog = re-open log-file (allow rolling logs)
  note <text> = add a note to wpa_supplicant debug log
  mib = get MIB variables (dot1x, dot11)
  help [command] = show usage help
  interface [ifname] = show interfaces/select interface
  level <debug level> = change debug level
  license = show full wpa_cli license
  quit = exit wpa_cli
  set = set variables (shows list of variables when run without arguments)
  dump = dump config variables
  get <name> = get information
  driver_flags = list driver flags
  logon = IEEE 802.1X EAPOL state machine logon
  logoff = IEEE 802.1X EAPOL state machine logoff
  pmksa = show PMKSA cache
  pmksa_flush = flush PMKSA cache entries
  pmksa_get <network_id> = fetch all stored PMKSA cache entries
  pmksa_add <network_id> <BSSID> <PMKID> <PMK> <reauth_time in seconds> <expiration in seconds> <akmp> <opportunistic> = store PMKSA cache entry from external storage
  reassociate = force reassociation
  reattach = force reassociation back to the same BSS
  preauthenticate <BSSID> = force preauthentication
  identity <network id> <identity> = configure identity for an SSID
  password <network id> <password> = configure password for an SSID
  new_password <network id> <password> = change password for an SSID
  pin <network id> <pin> = configure pin for an SSID
  otp <network id> <password> = configure one-time-password for an SSID
  psk_passphrase <network id> <PSK/passphrase> = configure PSK/passphrase for an SSID
  passphrase <network id> <passphrase> = configure private key passphrase
    for an SSID
  sim <network id> <pin> = report SIM operation result
  bssid <network id> <BSSID> = set preferred BSSID for an SSID
  blacklist <BSSID> = add a BSSID to the blacklist
  blacklist clear = clear the blacklist
  blacklist = display the blacklist
  log_level <level> [<timestamp>] = update the log level/timestamp
  log_level = display the current log level and log options
  list_networks = list configured networks
  select_network <network id> = select a network (disable others)
  enable_network <network id> = enable a network
  disable_network <network id> = disable a network
  add_network = add a network
  remove_network <network id> = remove a network
  set_network <network id> <variable> <value> = set network variables (shows
    list of variables when run without arguments)
  get_network <network id> <variable> = get network variables
  dup_network <src network id> <dst network id> <variable> = duplicate network variables
  list_creds = list configured credentials
  add_cred = add a credential
  remove_cred <cred id> = remove a credential
  set_cred <cred id> <variable> <value> = set credential variables
  get_cred <cred id> <variable> = get credential variables
  save_config = save the current configuration
  disconnect = disconnect and wait for reassociate/reconnect command before
    connecting
  reconnect = like reassociate, but only takes effect if already disconnected
  scan = request new BSS scan
  scan_results = get latest scan results
  abort_scan = request ongoing scan to be aborted
  bss <<idx> | <bssid>> = get detailed scan result info
  get_capability <eap/pairwise/group/key_mgmt/proto/auth_alg/channels/freq/modes> = get capabilities
  reconfigure = force wpa_supplicant to re-read its configuration file
  terminate = terminate wpa_supplicant
  interface_add <ifname> <confname> <driver> <ctrl_interface> <driver_param>
    <bridge_name> <create> <type> = adds new interface, all parameters but
    <ifname> are optional. Supported types are station ('sta') and AP ('ap')
  interface_remove <ifname> = removes the interface
  interface_list = list available interfaces
  ap_scan <value> = set ap_scan parameter
  scan_interval <value> = set scan_interval parameter (in seconds)
  bss_expire_age <value> = set BSS expiration age parameter
  bss_expire_count <value> = set BSS expiration scan count parameter
  bss_flush <value> = set BSS flush age (0 by default)
  ft_ds <addr> = request over-the-DS FT with <addr>
  wps_pbc [BSSID] = start Wi-Fi Protected Setup: Push Button Configuration
  wps_pin <BSSID> [PIN] = start WPS PIN method (returns PIN, if not hardcoded)
  wps_check_pin <PIN> = verify PIN checksum
  wps_cancel Cancels the pending WPS operation
  wps_nfc [BSSID] = start Wi-Fi Protected Setup: NFC
  wps_nfc_config_token <WPS|NDEF> = build configuration token
  wps_nfc_token <WPS|NDEF> = create password token
  wps_nfc_tag_read <hexdump of payload> = report read NFC tag with WPS data
  nfc_get_handover_req <NDEF> <WPS> = create NFC handover request
  nfc_get_handover_sel <NDEF> <WPS> = create NFC handover select
  nfc_report_handover <role> <type> <hexdump of req> <hexdump of sel> = report completed NFC handover
  wps_reg <BSSID> <AP PIN> = start WPS Registrar to configure an AP
  wps_ap_pin [params..] = enable/disable AP PIN
  wps_er_start [IP address] = start Wi-Fi Protected Setup External Registrar
  wps_er_stop = stop Wi-Fi Protected Setup External Registrar
  wps_er_pin <UUID> <PIN> = add an Enrollee PIN to External Registrar
  wps_er_pbc <UUID> = accept an Enrollee PBC using External Registrar
  wps_er_learn <UUID> <PIN> = learn AP configuration
  wps_er_set_config <UUID> <network id> = set AP configuration for enrolling
  wps_er_config <UUID> <PIN> <SSID> <auth> <encr> <key> = configure AP
  wps_er_nfc_config_token <WPS/NDEF> <UUID> = build NFC configuration token
  ibss_rsn <addr> = request RSN authentication with <addr> in IBSS
  sta <addr> = get information about an associated station (AP)
  all_sta = get information about all associated stations (AP)
  list_sta = list all stations (AP)
  deauthenticate <addr> = deauthenticate a station
  disassociate <addr> = disassociate a station
  chan_switch <cs_count> <freq> [sec_channel_offset=] [center_freq1=] [center_freq2=] [bandwidth=] [blocktx] [ht|vht] = CSA parameters
  suspend = notification of suspend/hibernate
  resume = notification of resume/thaw
  roam <addr> = roam to the specified BSS
  p2p_find [timeout] [type=*] = find P2P Devices for up-to timeout seconds
  p2p_stop_find = stop P2P Devices search
  p2p_asp_provision <addr> adv_id=<adv_id> conncap=<conncap> [info=<infodata>] = provision with a P2P ASP Device
  p2p_asp_provision_resp <addr> adv_id=<adv_id> [role<conncap>] [info=<infodata>] = provision with a P2P ASP Device
  p2p_connect <addr> <"pbc"|PIN> [ht40] = connect to a P2P Device
  p2p_listen [timeout] = listen for P2P Devices for up-to timeout seconds
  p2p_group_remove <ifname> = remove P2P group interface (terminate group if GO)
  p2p_group_add [ht40] = add a new P2P group (local end as GO)
  p2p_group_member <dev_addr> = Get peer interface address on local GO using peer Device Address
  p2p_prov_disc <addr> <method> = request provisioning discovery
  p2p_get_passphrase = get the passphrase for a group (GO only)
  p2p_serv_disc_req <addr> <TLVs> = schedule service discovery request
  p2p_serv_disc_cancel_req <id> = cancel pending service discovery request
  p2p_serv_disc_resp <freq> <addr> <dialog token> <TLVs> = service discovery response
  p2p_service_update = indicate change in local services
  p2p_serv_disc_external <external> = set external processing of service discovery
  p2p_service_flush = remove all stored service entries
  p2p_service_add <bonjour|upnp|asp> <query|version> <response|service> = add a local service
  p2p_service_rep asp <auto> <adv_id> <svc_state> <svc_string> [<svc_info>] = replace local ASP service
  p2p_service_del <bonjour|upnp> <query|version> [|service] = remove a local service
  p2p_reject <addr> = reject connection attempts from a specific peer
  p2p_invite <cmd> [peer=addr] = invite peer
  p2p_peers [discovered] = list known (optionally, only fully discovered) P2P peers
  p2p_peer <address> = show information about known P2P peer
  p2p_set <field> <value> = set a P2P parameter
  p2p_flush = flush P2P state
  p2p_cancel = cancel P2P group formation
  p2p_unauthorize <address> = unauthorize a peer
  p2p_presence_req [<duration> <interval>] [<duration> <interval>] = request GO presence
  p2p_ext_listen [<period> <interval>] = set extended listen timing
  p2p_remove_client <address|iface=address> = remove a peer from all groups
  vendor_elem_add <frame id> <hexdump of elem(s)> = add vendor specific IEs to frame(s)
    0: Probe Req (P2P), 1: Probe Resp (P2P) , 2: Probe Resp (GO), 3: Beacon (GO), 4: PD Req, 5: PD Resp, 6: GO Neg Req, 7: GO Neg Resp, 8: GO Neg Conf, 9: Inv Req, 10: Inv Resp, 11: Assoc Req (P2P), 12: Assoc Resp (P2P)
  vendor_elem_get <frame id> = get vendor specific IE(s) to frame(s)
    0: Probe Req (P2P), 1: Probe Resp (P2P) , 2: Probe Resp (GO), 3: Beacon (GO), 4: PD Req, 5: PD Resp, 6: GO Neg Req, 7: GO Neg Resp, 8: GO Neg Conf, 9: Inv Req, 10: Inv Resp, 11: Assoc Req (P2P), 12: Assoc Resp (P2P)
  vendor_elem_remove <frame id> <hexdump of elem(s)> = remove vendor specific IE(s) in frame(s)
    0: Probe Req (P2P), 1: Probe Resp (P2P) , 2: Probe Resp (GO), 3: Beacon (GO), 4: PD Req, 5: PD Resp, 6: GO Neg Req, 7: GO Neg Resp, 8: GO Neg Conf, 9: Inv Req, 10: Inv Resp, 11: Assoc Req (P2P), 12: Assoc Resp (P2P)
  wfd_subelem_set <subelem> [contents] = set Wi-Fi Display subelement
  wfd_subelem_get <subelem> = get Wi-Fi Display subelement
  fetch_anqp = fetch ANQP information for all APs
  stop_fetch_anqp = stop fetch_anqp operation
  interworking_select [auto] = perform Interworking network selection
  interworking_connect <BSSID> = connect using Interworking credentials
  interworking_add_network <BSSID> = connect using Interworking credentials
  anqp_get <addr> <info id>[,<info id>]... = request ANQP information
  gas_request <addr> <AdvProtoID> [QueryReq] = GAS request
  gas_response_get <addr> <dialog token> [start,len] = Fetch last GAS response
  hs20_anqp_get <addr> <subtype>[,<subtype>]... = request HS 2.0 ANQP information
  nai_home_realm_list <addr> <home realm> = get HS20 nai home realm list
  hs20_icon_request <addr> <icon name> = get Hotspot 2.0 OSU icon
  fetch_osu = fetch OSU provider information from all APs
  cancel_fetch_osu = cancel fetch_osu command
  sta_autoconnect <0/1> = disable/enable automatic reconnection
  tdls_discover <addr> = request TDLS discovery with <addr>
  tdls_setup <addr> = request TDLS setup with <addr>
  tdls_teardown <addr> = tear down TDLS with <addr>
  tdls_link_status <addr> = TDLS link status with <addr>
  wmm_ac_addts <uplink/downlink/bidi> <tsid=0..7> <up=0..7> [nominal_msdu_size=#] [mean_data_rate=#] [min_phy_rate=#] [sba=#] [fixed_nominal_msdu] = add WMM-AC traffic stream
  wmm_ac_delts <tsid> = delete WMM-AC traffic stream
  wmm_ac_status = show status for Wireless Multi-Media Admission-Control
  tdls_chan_switch <addr> <oper class> <freq> [sec_channel_offset=] [center_freq1=] [center_freq2=] [bandwidth=] [ht|vht] = enable channel switching with TDLS peer
  tdls_cancel_chan_switch <addr> = disable channel switching with TDLS peer <addr>
  signal_poll = get signal parameters
  signal_monitor = set signal monitor parameters
  pktcnt_poll = get TX/RX packet counters
  reauthenticate = trigger IEEE 802.1X/EAPOL reauthentication
  autoscan [params] = Set or unset (if none) autoscan parameters
  raw <params..> = Sent unprocessed command
  flush = flush wpa_supplicant state
  radio_work = radio_work <show/add/done>
  vendor <vendor id> <command id> [<hex formatted command argument>] = Send vendor command
  neighbor_rep_request [ssid=<SSID>] [lci] [civic] = Trigger request to AP for neighboring AP report (with optional given SSID in hex or enclosed in double quotes, default: current SSID; with optional LCI and location civic request)
  erp_flush = flush ERP keys
  mac_rand_scan <scan|sched|pno|all> enable=<0/1> [addr=mac-address mask=mac-address-mask] = scan MAC randomization
  get_pref_freq_list <interface type> = retrieve preferred freq list for the specified interface type
  p2p_lo_start <freq> <period> <interval> <count> = start P2P listen offload
  p2p_lo_stop = stop P2P listen offload
  dpp_qr_code report a scanned DPP URI from a QR Code
  dpp_bootstrap_gen type=<qrcode> [chan=..] [mac=..] [info=..] [curve=..] [key=..] = generate DPP bootstrap information
  dpp_bootstrap_remove *|<id> = remove DPP bootstrap information
  dpp_bootstrap_get_uri <id> = get DPP bootstrap URI
  dpp_bootstrap_info <id> = show DPP bootstrap information
  dpp_auth_init peer=<id> [own=<id>] = initiate DPP bootstrapping
  dpp_listen <freq in MHz> = start DPP listen
  dpp_stop_listen = stop DPP listen
  dpp_configurator_add [curve=..] [key=..] = add DPP configurator
  dpp_configurator_remove *|<id> = remove DPP configurator
  dpp_configurator_get_key <id> = Get DPP configurator's private key
  dpp_configurator_sign conf=<role> configurator=<id> = generate self DPP configuration
  dpp_pkex_add add PKEX code
  dpp_pkex_remove *|<id> = remove DPP pkex information


See also

Retrieved from "https://www.wikieduonline.com/index.php?title=Wpa_cli&oldid=44583"

Advertising: