Crypto key generate rsa

crypto key generate rsa

crypto key generate rsa
% You already have RSA keys defined named sw1.your_domain.com.
% Do you really want to replace them? [yes/no]:
% Please answer 'yes' or 'no'.
% Do you really want to replace them? [yes/no]: yes
Choose the size of the key modulus in the range of 360 to 4096 for your
  General Purpose Keys. Choosing a key modulus greater than 512 may take
  a few minutes.

How many bits in the modulus [512]:
% Generating 512 bit RSA keys, keys will be non-exportable...
[OK] (elapsed time was 1 seconds)

crypto key generate rsa modulus 2048

Related terms

• ip domain-name
• show crypto key mypubkey rsa
• ssh key rsa 2048 force
• ssh_dispatch_run_fatal: Connection to 10.10.10.5 port 22: Invalid key length
• crypto key zeroize rsa
• Linux: ssh-keygen -t rsa

See also

• show ssh, show ip ssh, Cisco IOS/Configure public RSA key authentication, transport input ssh, ip ssh pubkey-chain, crypto key generate rsa, show crypto key mypubkey rsa, crypto key zeroize rsa
• Cisco IOS: Cisco IOS XE, Config (mode), VLANs, Cisco IOS logging, VTP, ACLs, show logging, show logging history, show interface status, debug, archive, show archive, conf t, int, ip http server, ip ssh, ip address, vty, show mac address-table, show access-list, Access-list, ip access-group, admin