|
|
| Line 2: |
Line 2: |
| | cat /etc/gitlab/gitlab.rb | grep -v "#" | grep . | | cat /etc/gitlab/gitlab.rb | grep -v "#" | grep . |
| | | | |
| − | == /etc/gitlab/gitlab.rb == | + | == [[Full /etc/gitlab/gitlab.rb]] == |
| − | <pre>
| |
| − | ## GitLab configuration settings
| |
| − | ##! This file is generated during initial installation and **is not** modified
| |
| − | ##! during upgrades.
| |
| − | ##! Check out the latest version of this file to know about the different
| |
| − | ##! settings that can be configured, when they were introduced and why:
| |
| − | ##! https://gitlab.com/gitlab-org/omnibus-gitlab/blame/master/files/gitlab-config-template/gitlab.rb.template
| |
| − | | |
| − | ##! Locally, the complete template corresponding to the installed version can be found at:
| |
| − | ##! /opt/gitlab/etc/gitlab.rb.template
| |
| − | | |
| − | ##! You can run `gitlab-ctl diff-config` to compare the contents of the current gitlab.rb with
| |
| − | ##! the gitlab.rb.template from the currently running version.
| |
| − | | |
| − | ##! You can run `gitlab-ctl show-config` to display the configuration that will be generated by
| |
| − | ##! running `gitlab-ctl reconfigure`
| |
| − | | |
| − | ##! In general, the values specified here should reflect what the default value of the attribute will be.
| |
| − | ##! There are instances where this behavior is not possible or desired. For example, when providing passwords,
| |
| − | ##! or connecting to third party services.
| |
| − | ##! In those instances, we endeavour to provide an example configuration.
| |
| − | | |
| − | ## GitLab URL
| |
| − | ##! URL on which GitLab will be reachable.
| |
| − | ##! For more details on configuring external_url see:
| |
| − | ##! https://docs.gitlab.com/omnibus/settings/configuration.html#configuring-the-external-url-for-gitlab
| |
| − | ##!
| |
| − | ##! Note: During installation/upgrades, the value of the environment variable
| |
| − | ##! EXTERNAL_URL will be used to populate/replace this value.
| |
| − | ##! On AWS EC2 instances, we also attempt to fetch the public hostname/IP
| |
| − | ##! address from AWS. For more details, see:
| |
| − | ##! https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instancedata-data-retrieval.html
| |
| − | # external_url 'GENERATED_EXTERNAL_URL'
| |
| − | | |
| − | ## Roles for multi-instance GitLab
| |
| − | ##! The default is to have no roles enabled, which results in GitLab running as an all-in-one instance.
| |
| − | ##! Options:
| |
| − | ##! redis_sentinel_role redis_master_role redis_replica_role geo_primary_role geo_secondary_role
| |
| − | ##! postgres_role consul_role application_role monitoring_role
| |
| − | ##! For more details on each role, see:
| |
| − | ##! https://docs.gitlab.com/omnibus/roles/README.html#roles
| |
| − | ##!
| |
| − | # roles ['redis_sentinel_role', 'redis_master_role']
| |
| − | | |
| − | ## Legend
| |
| − | ##! The following notations at the beginning of each line may be used to
| |
| − | ##! differentiate between components of this file and to easily select them using
| |
| − | ##! a regex.
| |
| − | ##! ## Titles, subtitles etc
| |
| − | ##! ##! More information - Description, Docs, Links, Issues etc.
| |
| − | ##! Configuration settings have a single # followed by a single space at the
| |
| − | ##! beginning; Remove them to enable the setting.
| |
| − | | |
| − | ##! **Configuration settings below are optional.**
| |
| − | | |
| − | | |
| − | ################################################################################
| |
| − | ################################################################################
| |
| − | ## Configuration Settings for GitLab CE and EE ##
| |
| − | ################################################################################
| |
| − | ################################################################################
| |
| − | | |
| − | ################################################################################
| |
| − | ## gitlab.yml configuration
| |
| − | ##! Docs: https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/doc/settings/gitlab.yml.md
| |
| − | ################################################################################
| |
| − | # gitlab_rails['gitlab_ssh_host'] = 'ssh.host_example.com'
| |
| − | # gitlab_rails['gitlab_ssh_user'] = ''
| |
| − | # gitlab_rails['time_zone'] = 'UTC'
| |
| − | | |
| − | ### Request duration
| |
| − | ###! Tells the rails application how long it has to complete a request
| |
| − | ###! This value needs to be lower than the worker timeout set in unicorn/puma.
| |
| − | ###! By default, we'll allow 95% of the the worker timeout
| |
| − | # gitlab_rails['max_request_duration_seconds'] = 57
| |
| − | | |
| − | ### GitLab email server settings
| |
| − | ###! Docs: https://docs.gitlab.com/omnibus/settings/smtp.html
| |
| − | ###! **Use smtp instead of sendmail/postfix.**
| |
| − | | |
| − | # gitlab_rails['smtp_enable'] = true
| |
| − | # gitlab_rails['smtp_address'] = "smtp.server"
| |
| − | # gitlab_rails['smtp_port'] = 465
| |
| − | # gitlab_rails['smtp_user_name'] = "smtp user"
| |
| − | # gitlab_rails['smtp_password'] = "smtp password"
| |
| − | # gitlab_rails['smtp_domain'] = "example.com"
| |
| − | # gitlab_rails['smtp_authentication'] = "login"
| |
| − | # gitlab_rails['smtp_enable_starttls_auto'] = true
| |
| − | # gitlab_rails['smtp_tls'] = false
| |
| − | | |
| − | ###! **Can be: 'none', 'peer', 'client_once', 'fail_if_no_peer_cert'**
| |
| − | ###! Docs: http://api.rubyonrails.org/classes/ActionMailer/Base.html
| |
| − | # gitlab_rails['smtp_openssl_verify_mode'] = 'none'
| |
| − | | |
| − | # gitlab_rails['smtp_ca_path'] = "/etc/ssl/certs"
| |
| − | # gitlab_rails['smtp_ca_file'] = "/etc/ssl/certs/ca-certificates.crt"
| |
| − | | |
| − | ### Email Settings
| |
| − | | |
| − | # gitlab_rails['gitlab_email_enabled'] = true
| |
| − | | |
| − | | |
| − | ##! can change the 'From' with this setting.
| |
| − | | |
| − | # gitlab_rails['gitlab_email_display_name'] = 'Example'
| |
| − | | |
| − | # gitlab_rails['gitlab_email_subject_suffix'] = ''
| |
| − | # gitlab_rails['gitlab_email_smime_enabled'] = false
| |
| − | # gitlab_rails['gitlab_email_smime_key_file'] = '/etc/gitlab/ssl/gitlab_smime.key'
| |
| − | # gitlab_rails['gitlab_email_smime_cert_file'] = '/etc/gitlab/ssl/gitlab_smime.crt'
| |
| − | # gitlab_rails['gitlab_email_smime_ca_certs_file'] = '/etc/gitlab/ssl/gitlab_smime_cas.crt'
| |
| − | | |
| − | ### GitLab user privileges
| |
| − | # gitlab_rails['gitlab_default_can_create_group'] = true
| |
| − | # gitlab_rails['gitlab_username_changing_enabled'] = true
| |
| − | | |
| − | ### Default Theme
| |
| − | ### Available values:
| |
| − | ##! `1` for Indigo
| |
| − | ##! `2` for Dark
| |
| − | ##! `3` for Light
| |
| − | ##! `4` for Blue
| |
| − | ##! `5` for Green
| |
| − | ##! `6` for Light Indigo
| |
| − | ##! `7` for Light Blue
| |
| − | ##! `8` for Light Green
| |
| − | ##! `9` for Red
| |
| − | ##! `10` for Light Red
| |
| − | # gitlab_rails['gitlab_default_theme'] = 2
| |
| − | | |
| − | ### Default project feature settings
| |
| − | # gitlab_rails['gitlab_default_projects_features_issues'] = true
| |
| − | # gitlab_rails['gitlab_default_projects_features_merge_requests'] = true
| |
| − | # gitlab_rails['gitlab_default_projects_features_wiki'] = true
| |
| − | # gitlab_rails['gitlab_default_projects_features_snippets'] = true
| |
| − | # gitlab_rails['gitlab_default_projects_features_builds'] = true
| |
| − | # gitlab_rails['gitlab_default_projects_features_container_registry'] = true
| |
| − | | |
| − | ### Automatic issue closing
| |
| − | ###! See https://docs.gitlab.com/ee/customization/issue_closing.html for more
| |
| − | ###! information about this pattern.
| |
| − | # gitlab_rails['gitlab_issue_closing_pattern'] = "\b((?:[Cc]los(?:e[sd]?|ing)|\b[Ff]ix(?:e[sd]|ing)?|\b[Rr]esolv(?:e[sd]?|ing)|\b[Ii]mplement(?:s|ed|ing)?)(:?) +(?:(?:issues? +)?%{issue_ref}(?:(?:, *| +and +)?)|([A-Z][A-Z0-9_]+-\d+))+)"
| |
| − | | |
| − | ### Download location
| |
| − | ###! When a user clicks e.g. 'Download zip' on a project, a temporary zip file
| |
| − | ###! is created in the following directory.
| |
| − | ###! Should not be the same path, or a sub directory of any of the `git_data_dirs`
| |
| − | # gitlab_rails['gitlab_repository_downloads_path'] = 'tmp/repositories'
| |
| − | | |
| − | ### Gravatar Settings
| |
| − | # gitlab_rails['gravatar_plain_url'] = 'http://www.gravatar.com/avatar/%{hash}?s=%{size}&d=identicon'
| |
| − | # gitlab_rails['gravatar_ssl_url'] = 'https://secure.gravatar.com/avatar/%{hash}?s=%{size}&d=identicon'
| |
| − | | |
| − | ### Auxiliary jobs
| |
| − | ###! Periodically executed jobs, to self-heal Gitlab, do external
| |
| − | ###! synchronizations, etc.
| |
| − | ###! Docs: https://github.com/ondrejbartas/sidekiq-cron#adding-cron-job
| |
| − | ###! https://docs.gitlab.com/ee/ci/yaml/README.html#artifactsexpire_in
| |
| − | # gitlab_rails['stuck_ci_jobs_worker_cron'] = "0 0 * * *"
| |
| − | # gitlab_rails['expire_build_artifacts_worker_cron'] = "*/7 * * * *"
| |
| − | # gitlab_rails['environments_auto_stop_cron_worker_cron'] = "24 * * * *"
| |
| − | # gitlab_rails['pipeline_schedule_worker_cron'] = "19 * * * *"
| |
| − | # gitlab_rails['ci_archive_traces_cron_worker_cron'] = "17 * * * *"
| |
| − | # gitlab_rails['repository_check_worker_cron'] = "20 * * * *"
| |
| − | # gitlab_rails['admin_email_worker_cron'] = "0 0 * * 0"
| |
| − | # gitlab_rails['personal_access_tokens_expiring_worker_cron'] = "0 1 * * *"
| |
| − | # gitlab_rails['personal_access_tokens_expired_notification_worker_cron'] = "0 2 * * *"
| |
| − | # gitlab_rails['repository_archive_cache_worker_cron'] = "0 * * * *"
| |
| − | # gitlab_rails['pages_domain_verification_cron_worker'] = "*/15 * * * *"
| |
| − | # gitlab_rails['pages_domain_ssl_renewal_cron_worker'] = "*/10 * * * *"
| |
| − | # gitlab_rails['pages_domain_removal_cron_worker'] = "47 0 * * *"
| |
| − | # gitlab_rails['remove_unaccepted_member_invites_cron_worker'] = "10 15 * * *"
| |
| − | # gitlab_rails['schedule_migrate_external_diffs_worker_cron'] = "15 * * * *"
| |
| − | # gitlab_rails['ci_platform_metrics_update_cron_worker'] = '47 9 * * *'
| |
| − | # gitlab_rails['analytics_usage_trends_count_job_trigger_worker_cron'] = "50 23 */1 * *"
| |
| − | # gitlab_rails['member_invitation_reminder_emails_worker_cron'] = "0 0 * * *"
| |
| − | # gitlab_rails['user_status_cleanup_batch_worker_cron'] = "* * * * *"
| |
| − | | |
| − | ### Webhook Settings
| |
| − | ###! Number of seconds to wait for HTTP response after sending webhook HTTP POST
| |
| − | ###! request (default: 10)
| |
| − | # gitlab_rails['webhook_timeout'] = 10
| |
| − | | |
| − | ### GraphQL Settings
| |
| − | ###! Tells the rails application how long it has to complete a GraphQL request.
| |
| − | ###! We suggest this value to be higher than the database timeout value
| |
| − | ###! and lower than the worker timeout set in unicorn/puma. (default: 30)
| |
| − | # gitlab_rails['graphql_timeout'] = 30
| |
| − | | |
| − | ### Trusted proxies
| |
| − | ###! Customize if you have GitLab behind a reverse proxy which is running on a
| |
| − | ###! different machine.
| |
| − | ###! **Add the IP address for your reverse proxy to the list, otherwise users
| |
| − | ###! will appear signed in from that address.**
| |
| − | # gitlab_rails['trusted_proxies'] = []
| |
| − | | |
| − | ### Content Security Policy
| |
| − | ####! Customize if you want to enable the Content-Security-Policy header, which
| |
| − | ####! can help thwart JavaScript cross-site scripting (XSS) attacks.
| |
| − | ####! See: https://developer.mozilla.org/en-US/docs/Web/HTTP/CSP
| |
| − | # gitlab_rails['content_security_policy'] = {
| |
| − | # 'enabled' => false,
| |
| − | # 'report_only' => false,
| |
| − | # # Each directive is a String (e.g. "'self'").
| |
| − | # 'directives' => {
| |
| − | # 'base_uri' => nil,
| |
| − | # 'child_src' => nil,
| |
| − | # 'connect_src' => nil,
| |
| − | # 'default_src' => nil,
| |
| − | # 'font_src' => nil,
| |
| − | # 'form_action' => nil,
| |
| − | # 'frame_ancestors' => nil,
| |
| − | # 'frame_src' => nil,
| |
| − | # 'img_src' => nil,
| |
| − | # 'manifest_src' => nil,
| |
| − | # 'media_src' => nil,
| |
| − | # 'object_src' => nil,
| |
| − | # 'script_src' => nil,
| |
| − | # 'style_src' => nil,
| |
| − | # 'worker_src' => nil,
| |
| − | # 'report_uri' => nil,
| |
| − | # }
| |
| − | # }
| |
| − | | |
| − | ### Allowed hosts
| |
| − | ###! Customize the `host` headers that should be catered by the Rails
| |
| − | ###! application. By default, everything is allowed.
| |
| − | # gitlab_rails['allowed_hosts'] = []
| |
| − | | |
| − | ### Monitoring settings
| |
| − | ###! IP whitelist controlling access to monitoring endpoints
| |
| − | # gitlab_rails['monitoring_whitelist'] = ['127.0.0.0/8', '::1/128']
| |
| − | ###! Time between sampling of unicorn socket metrics, in seconds
| |
| − | # gitlab_rails['monitoring_unicorn_sampler_interval'] = 10
| |
| − | | |
| − | ### Shutdown settings
| |
| − | ###! Defines an interval to block healthcheck,
| |
| − | ###! but continue accepting application requests.
| |
| − | # gitlab_rails['shutdown_blackout_seconds'] = 10
| |
| − | | |
| − | ### Reply by email
| |
| − | ###! Allow users to comment on issues and merge requests by replying to
| |
| − | ###! notification emails.
| |
| − | ###! Docs: https://docs.gitlab.com/ee/administration/reply_by_email.html
| |
| − | # gitlab_rails['incoming_email_enabled'] = true
| |
| − | | |
| − | #### Incoming Email Address
| |
| − | ####! The email address including the `%{key}` placeholder that will be replaced
| |
| − | ####! to reference the item being replied to.
| |
| − | ####! **The placeholder can be omitted but if present, it must appear in the
| |
| − | ####! "user" part of the address (before the `@`).**
| |
| − | # gitlab_rails['incoming_email_address'] = "gitlab-incoming+%{key}@gmail.com"
| |
| − | | |
| − | #### Email account username
| |
| − | ####! **With third party providers, this is usually the full email address.**
| |
| − | ####! **With self-hosted email servers, this is usually the user part of the
| |
| − | ####! email address.**
| |
| − | | |
| − | | |
| − | #### Email account password
| |
| − | # gitlab_rails['incoming_email_password'] = "[REDACTED]"
| |
| − | | |
| − | #### IMAP Settings
| |
| − | # gitlab_rails['incoming_email_host'] = "imap.gmail.com"
| |
| − | # gitlab_rails['incoming_email_port'] = 993
| |
| − | # gitlab_rails['incoming_email_ssl'] = true
| |
| − | # gitlab_rails['incoming_email_start_tls'] = false
| |
| − | | |
| − | #### Incoming Mailbox Settings (via `mail_room`)
| |
| − | ####! The mailbox where incoming mail will end up. Usually "inbox".
| |
| − | # gitlab_rails['incoming_email_mailbox_name'] = "inbox"
| |
| − | ####! The IDLE command timeout.
| |
| − | # gitlab_rails['incoming_email_idle_timeout'] = 60
| |
| − | ####! The file name for internal `mail_room` JSON logfile
| |
| − | # gitlab_rails['incoming_email_log_file'] = "/var/log/gitlab/mailroom/mail_room_json.log"
| |
| − | ####! Permanently remove messages from the mailbox when they are deleted after delivery
| |
| − | # gitlab_rails['incoming_email_expunge_deleted'] = false
| |
| − | | |
| − | ####! The format of mail_room crash logs
| |
| − | # mailroom['exit_log_format'] = "plain"
| |
| − | | |
| − | ### Consolidated (simplified) object storage configuration
| |
| − | ###! This uses a single credential for object storage with multiple buckets.
| |
| − | ###! It also enables Workhorse to upload files directly with its own S3 client
| |
| − | ###! instead of using pre-signed URLs.
| |
| − | ###!
| |
| − | ###! This configuration will only take effect if the object_store
| |
| − | ###! sections are not defined within the types. For example, enabling
| |
| − | ###! gitlab_rails['artifacts_object_store_enabled'] or
| |
| − | ###! gitlab_rails['lfs_object_store_enabled'] will prevent the
| |
| − | ###! consolidated settings from being used.
| |
| − | ###!
| |
| − | ###! Be sure to use different buckets for each type of object.
| |
| − | ###! Docs: https://docs.gitlab.com/ee/administration/object_storage.html
| |
| − | # gitlab_rails['object_store']['enabled'] = false
| |
| − | # gitlab_rails['object_store']['connection'] = {}
| |
| − | # gitlab_rails['object_store']['storage_options'] = {}
| |
| − | # gitlab_rails['object_store']['proxy_download'] = false
| |
| − | # gitlab_rails['object_store']['objects']['artifacts']['bucket'] = nil
| |
| − | # gitlab_rails['object_store']['objects']['external_diffs']['bucket'] = nil
| |
| − | # gitlab_rails['object_store']['objects']['lfs']['bucket'] = nil
| |
| − | # gitlab_rails['object_store']['objects']['uploads']['bucket'] = nil
| |
| − | # gitlab_rails['object_store']['objects']['packages']['bucket'] = nil
| |
| − | # gitlab_rails['object_store']['objects']['dependency_proxy']['bucket'] = nil
| |
| − | # gitlab_rails['object_store']['objects']['terraform_state']['bucket'] = nil
| |
| − | | |
| − | ### Job Artifacts
| |
| − | # gitlab_rails['artifacts_enabled'] = true
| |
| − | # gitlab_rails['artifacts_path'] = "/var/opt/gitlab/gitlab-rails/shared/artifacts"
| |
| − | ####! Job artifacts Object Store
| |
| − | ####! Docs: https://docs.gitlab.com/ee/administration/job_artifacts.html#using-object-storage
| |
| − | # gitlab_rails['artifacts_object_store_enabled'] = false
| |
| − | # gitlab_rails['artifacts_object_store_direct_upload'] = false
| |
| − | # gitlab_rails['artifacts_object_store_background_upload'] = true
| |
| − | # gitlab_rails['artifacts_object_store_proxy_download'] = false
| |
| − | # gitlab_rails['artifacts_object_store_remote_directory'] = "artifacts"
| |
| − | # gitlab_rails['artifacts_object_store_connection'] = {
| |
| − | # 'provider' => 'AWS',
| |
| − | # 'region' => 'eu-west-1',
| |
| − | # 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
| |
| − | # 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
| |
| − | # # # The below options configure an S3 compatible host instead of AWS
| |
| − | # # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
| |
| − | # # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
| |
| − | # # 'host' => 's3.amazonaws.com',
| |
| − | # # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
| |
| − | # }
| |
| − | | |
| − | ### External merge request diffs
| |
| − | # gitlab_rails['external_diffs_enabled'] = false
| |
| − | # gitlab_rails['external_diffs_when'] = nil
| |
| − | # gitlab_rails['external_diffs_storage_path'] = "/var/opt/gitlab/gitlab-rails/shared/external-diffs"
| |
| − | # gitlab_rails['external_diffs_object_store_enabled'] = false
| |
| − | # gitlab_rails['external_diffs_object_store_direct_upload'] = false
| |
| − | # gitlab_rails['external_diffs_object_store_background_upload'] = false
| |
| − | # gitlab_rails['external_diffs_object_store_proxy_download'] = false
| |
| − | # gitlab_rails['external_diffs_object_store_remote_directory'] = "external-diffs"
| |
| − | # gitlab_rails['external_diffs_object_store_connection'] = {
| |
| − | # 'provider' => 'AWS',
| |
| − | # 'region' => 'eu-west-1',
| |
| − | # 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
| |
| − | # 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
| |
| − | # # # The below options configure an S3 compatible host instead of AWS
| |
| − | # # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
| |
| − | # # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
| |
| − | # # 'host' => 's3.amazonaws.com',
| |
| − | # # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
| |
| − | # }
| |
| − | | |
| − | ### Git LFS
| |
| − | # gitlab_rails['lfs_enabled'] = true
| |
| − | # gitlab_rails['lfs_storage_path'] = "/var/opt/gitlab/gitlab-rails/shared/lfs-objects"
| |
| − | # gitlab_rails['lfs_object_store_enabled'] = false
| |
| − | # gitlab_rails['lfs_object_store_direct_upload'] = false
| |
| − | # gitlab_rails['lfs_object_store_background_upload'] = true
| |
| − | # gitlab_rails['lfs_object_store_proxy_download'] = false
| |
| − | # gitlab_rails['lfs_object_store_remote_directory'] = "lfs-objects"
| |
| − | # gitlab_rails['lfs_object_store_connection'] = {
| |
| − | # 'provider' => 'AWS',
| |
| − | # 'region' => 'eu-west-1',
| |
| − | # 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
| |
| − | # 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
| |
| − | # # # The below options configure an S3 compatible host instead of AWS
| |
| − | # # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
| |
| − | # # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
| |
| − | # # 'host' => 's3.amazonaws.com',
| |
| − | # # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
| |
| − | # }
| |
| − | | |
| − | ### GitLab uploads
| |
| − | ###! Docs: https://docs.gitlab.com/ee/administration/uploads.html
| |
| − | # gitlab_rails['uploads_directory'] = "/var/opt/gitlab/gitlab-rails/uploads"
| |
| − | # gitlab_rails['uploads_storage_path'] = "/opt/gitlab/embedded/service/gitlab-rails/public"
| |
| − | # gitlab_rails['uploads_base_dir'] = "uploads/-/system"
| |
| − | # gitlab_rails['uploads_object_store_enabled'] = false
| |
| − | # gitlab_rails['uploads_object_store_direct_upload'] = false
| |
| − | # gitlab_rails['uploads_object_store_background_upload'] = true
| |
| − | # gitlab_rails['uploads_object_store_proxy_download'] = false
| |
| − | # gitlab_rails['uploads_object_store_remote_directory'] = "uploads"
| |
| − | # gitlab_rails['uploads_object_store_connection'] = {
| |
| − | # 'provider' => 'AWS',
| |
| − | # 'region' => 'eu-west-1',
| |
| − | # 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
| |
| − | # 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
| |
| − | # # # The below options configure an S3 compatible host instead of AWS
| |
| − | # # 'host' => 's3.amazonaws.com',
| |
| − | # # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
| |
| − | # # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
| |
| − | # # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
| |
| − | # }
| |
| − | | |
| − | ### Terraform state
| |
| − | ###! Docs: https://docs.gitlab.com/ee/administration/terraform_state
| |
| − | # gitlab_rails['terraform_state_enabled'] = true
| |
| − | # gitlab_rails['terraform_state_storage_path'] = "/var/opt/gitlab/gitlab-rails/shared/terraform_state"
| |
| − | # gitlab_rails['terraform_state_object_store_enabled'] = false
| |
| − | # gitlab_rails['terraform_state_object_store_remote_directory'] = "terraform"
| |
| − | # gitlab_rails['terraform_state_object_store_connection'] = {
| |
| − | # 'provider' => 'AWS',
| |
| − | # 'region' => 'eu-west-1',
| |
| − | # 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
| |
| − | # 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
| |
| − | # # # The below options configure an S3 compatible host instead of AWS
| |
| − | # # 'host' => 's3.amazonaws.com',
| |
| − | # # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
| |
| − | # # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
| |
| − | # # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
| |
| − | # }
| |
| − | | |
| − | ### GitLab Pages
| |
| − | # gitlab_rails['pages_object_store_enabled'] = false
| |
| − | # gitlab_rails['pages_object_store_remote_directory'] = "pages"
| |
| − | # gitlab_rails['pages_object_store_connection'] = {
| |
| − | # 'provider' => 'AWS',
| |
| − | # 'region' => 'eu-west-1',
| |
| − | # 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
| |
| − | # 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
| |
| − | # # # The below options configure an S3 compatible host instead of AWS
| |
| − | # # 'host' => 's3.amazonaws.com',
| |
| − | # # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
| |
| − | # # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
| |
| − | # # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
| |
| − | # }
| |
| − | | |
| − | ### Impersonation settings
| |
| − | # gitlab_rails['impersonation_enabled'] = true
| |
| − | | |
| − | ### Application settings cache expiry in seconds. (default: 60)
| |
| − | # gitlab_rails['application_settings_cache_seconds'] = 60
| |
| − | | |
| − | ### Usage Statistics
| |
| − | # gitlab_rails['usage_ping_enabled'] = true
| |
| − | | |
| − | ### Seat Link setting
| |
| − | ###! Docs: https://docs.gitlab.com/ee/subscriptions/index.html#seat-link
| |
| − | # gitlab_rails['seat_link_enabled'] = true
| |
| − | | |
| − | ### GitLab Mattermost
| |
| − | ###! These settings are void if Mattermost is installed on the same omnibus
| |
| − | ###! install
| |
| − | # gitlab_rails['mattermost_host'] = "https://mattermost.example.com"
| |
| − | | |
| − | ### LDAP Settings
| |
| − | ###! Docs: https://docs.gitlab.com/omnibus/settings/ldap.html
| |
| − | ###! **Be careful not to break the indentation in the ldap_servers block. It is
| |
| − | ###! in yaml format and the spaces must be retained. Using tabs will not work.**
| |
| − | | |
| − | # gitlab_rails['ldap_enabled'] = false
| |
| − | # gitlab_rails['prevent_ldap_sign_in'] = false
| |
| − | | |
| − | ###! **remember to close this block with 'EOS' below**
| |
| − | # gitlab_rails['ldap_servers'] = YAML.load <<-'EOS'
| |
| − | # main: # 'main' is the GitLab 'provider ID' of this LDAP server
| |
| − | # label: 'LDAP'
| |
| − | # host: '_your_ldap_server'
| |
| − | # port: 389
| |
| − | # uid: 'sAMAccountName'
| |
| − | # bind_dn: '_the_full_dn_of_the_user_you_will_bind_with'
| |
| − | # password: '_the_password_of_the_bind_user'
| |
| − | # encryption: 'plain' # "start_tls" or "simple_tls" or "plain"
| |
| − | # verify_certificates: true
| |
| − | # smartcard_auth: false
| |
| − | # active_directory: true
| |
| − | # allow_username_or_email_login: false
| |
| − | # lowercase_usernames: false
| |
| − | # block_auto_created_users: false
| |
| − | # base: ''
| |
| − | # user_filter: ''
| |
| − | # ## EE only
| |
| − | # group_base: ''
| |
| − | # admin_group: ''
| |
| − | # sync_ssh_keys: false
| |
| − | #
| |
| − | # secondary: # 'secondary' is the GitLab 'provider ID' of second LDAP server
| |
| − | # label: 'LDAP'
| |
| − | # host: '_your_ldap_server'
| |
| − | # port: 389
| |
| − | # uid: 'sAMAccountName'
| |
| − | # bind_dn: '_the_full_dn_of_the_user_you_will_bind_with'
| |
| − | # password: '_the_password_of_the_bind_user'
| |
| − | # encryption: 'plain' # "start_tls" or "simple_tls" or "plain"
| |
| − | # verify_certificates: true
| |
| − | # smartcard_auth: false
| |
| − | # active_directory: true
| |
| − | # allow_username_or_email_login: false
| |
| − | # lowercase_usernames: false
| |
| − | # block_auto_created_users: false
| |
| − | # base: ''
| |
| − | # user_filter: ''
| |
| − | # ## EE only
| |
| − | # group_base: ''
| |
| − | # admin_group: ''
| |
| − | # sync_ssh_keys: false
| |
| − | # EOS
| |
| − | | |
| − | ### Smartcard authentication settings
| |
| − | ###! Docs: https://docs.gitlab.com/ee/administration/auth/smartcard.html
| |
| − | # gitlab_rails['smartcard_enabled'] = false
| |
| − | # gitlab_rails['smartcard_ca_file'] = "/etc/gitlab/ssl/CA.pem"
| |
| − | # gitlab_rails['smartcard_client_certificate_required_host'] = 'smartcard.gitlab.example.com'
| |
| − | # gitlab_rails['smartcard_client_certificate_required_port'] = 3444
| |
| − | # gitlab_rails['smartcard_required_for_git_access'] = false
| |
| − | # gitlab_rails['smartcard_san_extensions'] = false
| |
| − | | |
| − | ### OmniAuth Settings
| |
| − | ###! Docs: https://docs.gitlab.com/ee/integration/omniauth.html
| |
| − | # gitlab_rails['omniauth_enabled'] = nil
| |
| − | # gitlab_rails['omniauth_allow_single_sign_on'] = ['saml']
| |
| − | # gitlab_rails['omniauth_sync_email_from_provider'] = 'saml'
| |
| − | # gitlab_rails['omniauth_sync_profile_from_provider'] = ['saml']
| |
| − | # gitlab_rails['omniauth_sync_profile_attributes'] = ['email']
| |
| − | # gitlab_rails['omniauth_auto_sign_in_with_provider'] = 'saml'
| |
| − | # gitlab_rails['omniauth_block_auto_created_users'] = true
| |
| − | # gitlab_rails['omniauth_auto_link_ldap_user'] = false
| |
| − | # gitlab_rails['omniauth_auto_link_saml_user'] = false
| |
| − | # gitlab_rails['omniauth_auto_link_user'] = ['saml']
| |
| − | # gitlab_rails['omniauth_external_providers'] = ['twitter', 'google_oauth2']
| |
| − | # gitlab_rails['omniauth_allow_bypass_two_factor'] = ['google_oauth2']
| |
| − | # gitlab_rails['omniauth_providers'] = [
| |
| − | # {
| |
| − | # "name" => "google_oauth2",
| |
| − | # "app_id" => "YOUR APP ID",
| |
| − | # "app_secret" => "YOUR APP SECRET",
| |
| − | # "args" => { "access_type" => "offline", "approval_prompt" => "" }
| |
| − | # }
| |
| − | # ]
| |
| − | | |
| − | ### FortiAuthenticator authentication settings
| |
| − | # gitlab_rails['forti_authenticator_enabled'] = false
| |
| − | # gitlab_rails['forti_authenticator_host'] = 'forti_authenticator.example.com'
| |
| − | # gitlab_rails['forti_authenticator_port'] = 443
| |
| − | # gitlab_rails['forti_authenticator_username'] = 'admin'
| |
| − | # gitlab_rails['forti_authenticator_access_token'] = 's3cr3t'
| |
| − | | |
| − | ### FortiToken Cloud authentication settings
| |
| − | # gitlab_rails['forti_token_cloud_enabled'] = false
| |
| − | # gitlab_rails['forti_token_cloud_client_id'] = 'forti_token_cloud_client_id'
| |
| − | # gitlab_rails['forti_token_cloud_client_secret'] = 's3cr3t'
| |
| − | | |
| − | ### Backup Settings
| |
| − | ###! Docs: https://docs.gitlab.com/omnibus/settings/backups.html
| |
| − | | |
| − | # gitlab_rails['manage_backup_path'] = true
| |
| − | # gitlab_rails['backup_path'] = "/var/opt/gitlab/backups"
| |
| − | | |
| − | ###! Docs: https://docs.gitlab.com/ee/raketasks/backup_restore.html#backup-archive-permissions
| |
| − | # gitlab_rails['backup_archive_permissions'] = 0644
| |
| − | | |
| − | # gitlab_rails['backup_pg_schema'] = 'public'
| |
| − | | |
| − | ###! The duration in seconds to keep backups before they are allowed to be deleted
| |
| − | # gitlab_rails['backup_keep_time'] = 604800
| |
| − | | |
| − | # gitlab_rails['backup_upload_connection'] = {
| |
| − | # 'provider' => 'AWS',
| |
| − | # 'region' => 'eu-west-1',
| |
| − | # 'aws_access_key_id' => 'AKIAKIAKI',
| |
| − | # 'aws_secret_access_key' => 'secret123',
| |
| − | # # # If IAM profile use is enabled, remove aws_access_key_id and aws_secret_access_key
| |
| − | # 'use_iam_profile' => false
| |
| − | # }
| |
| − | # gitlab_rails['backup_upload_remote_directory'] = 'my.s3.bucket'
| |
| − | # gitlab_rails['backup_multipart_chunk_size'] = 104857600
| |
| − | | |
| − | ###! **Turns on AWS Server-Side Encryption with Amazon S3-Managed Keys for
| |
| − | ###! backups**
| |
| − | # gitlab_rails['backup_encryption'] = 'AES256'
| |
| − | ###! The encryption key to use with AWS Server-Side Encryption.
| |
| − | ###! Setting this value will enable Server-Side Encryption with customer provided keys;
| |
| − | ###! otherwise S3-managed keys are used.
| |
| − | # gitlab_rails['backup_encryption_key'] = '<base64-encoded encryption key>'
| |
| − | | |
| − | ###! **Specifies Amazon S3 storage class to use for backups. Valid values
| |
| − | ###! include 'STANDARD', 'STANDARD_IA', and 'REDUCED_REDUNDANCY'**
| |
| − | # gitlab_rails['backup_storage_class'] = 'STANDARD'
| |
| − | | |
| − | ###! Skip parts of the backup. Comma separated.
| |
| − | ###! Docs: https://docs.gitlab.com/ee/raketasks/backup_restore.html#excluding-specific-directories-from-the-backup
| |
| − | #gitlab_rails['env'] = {
| |
| − | # "SKIP" => "db,uploads,repositories,builds,artifacts,lfs,registry,pages"
| |
| − | #}
| |
| − | | |
| − | ### Pseudonymizer Settings
| |
| − | # gitlab_rails['pseudonymizer_manifest'] = 'config/pseudonymizer.yml'
| |
| − | # gitlab_rails['pseudonymizer_upload_remote_directory'] = 'gitlab-elt'
| |
| − | # gitlab_rails['pseudonymizer_upload_connection'] = {
| |
| − | # 'provider' => 'AWS',
| |
| − | # 'region' => 'eu-west-1',
| |
| − | # 'aws_access_key_id' => 'AKIAKIAKI',
| |
| − | # 'aws_secret_access_key' => 'secret123'
| |
| − | # }
| |
| − | | |
| − | | |
| − | ### For setting up different data storing directory
| |
| − | ###! Docs: https://docs.gitlab.com/omnibus/settings/configuration.html#storing-git-data-in-an-alternative-directory
| |
| − | ###! **If you want to use a single non-default directory to store git data use a
| |
| − | ###! path that doesn't contain symlinks.**
| |
| − | # git_data_dirs({
| |
| − | # "default" => {
| |
| − | # "path" => "/mnt/nfs-01/git-data"
| |
| − | # }
| |
| − | # })
| |
| − | | |
| − | ### Gitaly settings
| |
| − | # gitlab_rails['gitaly_token'] = 'secret token'
| |
| − | | |
| − | ### For storing GitLab application uploads, eg. LFS objects, build artifacts
| |
| − | ###! Docs: https://docs.gitlab.com/ee/development/shared_files.html
| |
| − | # gitlab_rails['shared_path'] = '/var/opt/gitlab/gitlab-rails/shared'
| |
| − | | |
| − | ### For storing encrypted configuration files
| |
| − | ###! Docs: https://docs.gitlab.com/ee/administration/encrypted_configuration.html
| |
| − | # gitlab_rails['encrypted_settings_path'] = '/var/opt/gitlab/gitlab-rails/shared/encrypted_settings'
| |
| − | | |
| − | ### Wait for file system to be mounted
| |
| − | ###! Docs: https://docs.gitlab.com/omnibus/settings/configuration.html#only-start-omnibus-gitlab-services-after-a-given-filesystem-is-mounted
| |
| − | # high_availability['mountpoint'] = ["/var/opt/gitlab/git-data", "/var/opt/gitlab/gitlab-rails/shared"]
| |
| − | | |
| − | ### GitLab Shell settings for GitLab
| |
| − | # gitlab_rails['gitlab_shell_ssh_port'] = 22
| |
| − | # gitlab_rails['gitlab_shell_git_timeout'] = 800
| |
| − | | |
| − | ### Extra customization
| |
| − | # gitlab_rails['extra_google_analytics_id'] = '_your_tracking_id'
| |
| − | # gitlab_rails['extra_google_tag_manager_id'] = '_your_tracking_id'
| |
| − | # gitlab_rails['extra_matomo_url'] = '_your_matomo_url'
| |
| − | # gitlab_rails['extra_matomo_site_id'] = '_your_matomo_site_id'
| |
| − | # gitlab_rails['extra_matomo_disable_cookies'] = false
| |
| − | | |
| − | ##! Docs: https://docs.gitlab.com/omnibus/settings/environment-variables.html
| |
| − | # gitlab_rails['env'] = {
| |
| − | # 'BUNDLE_GEMFILE' => "/opt/gitlab/embedded/service/gitlab-rails/Gemfile",
| |
| − | # 'PATH' => "/opt/gitlab/bin:/opt/gitlab/embedded/bin:/bin:/usr/bin"
| |
| − | # }
| |
| − | | |
| − | # gitlab_rails['rack_attack_git_basic_auth'] = {
| |
| − | # 'enabled' => false,
| |
| − | # 'ip_whitelist' => ["127.0.0.1"],
| |
| − | # 'maxretry' => 10,
| |
| − | # 'findtime' => 60,
| |
| − | # 'bantime' => 3600
| |
| − | # }
| |
| − | | |
| − | ###! **We do not recommend changing these directories.**
| |
| − | # gitlab_rails['dir'] = "/var/opt/gitlab/gitlab-rails"
| |
| − | # gitlab_rails['log_directory'] = "/var/log/gitlab/gitlab-rails"
| |
| − | | |
| − | #### Change the initial default admin password and shared runner registration tokens.
| |
| − | ####! **Only applicable on initial setup, changing these settings after database
| |
| − | ####! is created and seeded won't yield any change.**
| |
| − | # gitlab_rails['initial_root_password'] = "password"
| |
| − | # gitlab_rails['initial_shared_runners_registration_token'] = "token"
| |
| − | | |
| − | #### Set path to an initial license to be used while bootstrapping GitLab.
| |
| − | ####! **Only applicable on initial setup, future license updations need to be done via UI.
| |
| − | ####! Updating the file specified in this path won't yield any change after the first reconfigure run.
| |
| − | # gitlab_rails['initial_license_file'] = '/etc/gitlab/company.gitlab-license'
| |
| − | | |
| − | #### Enable or disable automatic database migrations
| |
| − | # gitlab_rails['auto_migrate'] = true
| |
| − | | |
| − | #### This is advanced feature used by large gitlab deployments where loading
| |
| − | #### whole RAILS env takes a lot of time.
| |
| − | # gitlab_rails['rake_cache_clear'] = true
| |
| − | | |
| − | ### GitLab database settings
| |
| − | ###! Docs: https://docs.gitlab.com/omnibus/settings/database.html
| |
| − | ###! **Only needed if you use an external database.**
| |
| − | # gitlab_rails['db_adapter'] = "postgresql"
| |
| − | # gitlab_rails['db_encoding'] = "unicode"
| |
| − | # gitlab_rails['db_collation'] = nil
| |
| − | # gitlab_rails['db_database'] = "gitlabhq_production"
| |
| − | # gitlab_rails['db_username'] = "gitlab"
| |
| − | # gitlab_rails['db_password'] = nil
| |
| − | # gitlab_rails['db_host'] = nil
| |
| − | # gitlab_rails['db_port'] = 5432
| |
| − | # gitlab_rails['db_socket'] = nil
| |
| − | # gitlab_rails['db_sslmode'] = nil
| |
| − | # gitlab_rails['db_sslcompression'] = 0
| |
| − | # gitlab_rails['db_sslrootcert'] = nil
| |
| − | # gitlab_rails['db_sslcert'] = nil
| |
| − | # gitlab_rails['db_sslkey'] = nil
| |
| − | # gitlab_rails['db_prepared_statements'] = false
| |
| − | # gitlab_rails['db_statements_limit'] = 1000
| |
| − | # gitlab_rails['db_connect_timeout'] = nil
| |
| − | # gitlab_rails['db_keepalives'] = nil
| |
| − | # gitlab_rails['db_keepalives_idle'] = nil
| |
| − | # gitlab_rails['db_keepalives_interval'] = nil
| |
| − | # gitlab_rails['db_keepalives_count'] = nil
| |
| − | # gitlab_rails['db_tcp_user_timeout'] = nil
| |
| − | # gitlab_rails['db_application_name'] = nil
| |
| − | | |
| − | | |
| − | ### GitLab Redis settings
| |
| − | ###! Connect to your own Redis instance
| |
| − | ###! Docs: https://docs.gitlab.com/omnibus/settings/redis.html
| |
| − | | |
| − | #### Redis TCP connection
| |
| − | # gitlab_rails['redis_host'] = "127.0.0.1"
| |
| − | # gitlab_rails['redis_port'] = 6379
| |
| − | # gitlab_rails['redis_ssl'] = false
| |
| − | # gitlab_rails['redis_password'] = nil
| |
| − | # gitlab_rails['redis_database'] = 0
| |
| − | # gitlab_rails['redis_enable_client'] = true
| |
| − | | |
| − | #### Redis local UNIX socket (will be disabled if TCP method is used)
| |
| − | # gitlab_rails['redis_socket'] = "/var/opt/gitlab/redis/redis.socket"
| |
| − | | |
| − | #### Sentinel support
| |
| − | ####! To have Sentinel working, you must enable Redis TCP connection support
| |
| − | ####! above and define a few Sentinel hosts below (to get a reliable setup
| |
| − | ####! at least 3 hosts).
| |
| − | ####! **You don't need to list every sentinel host, but the ones not listed will
| |
| − | ####! not be used in a fail-over situation to query for the new master.**
| |
| − | # gitlab_rails['redis_sentinels'] = [
| |
| − | # {'host' => '127.0.0.1', 'port' => 26379},
| |
| − | # ]
| |
| − | | |
| − | #### Separate instances support
| |
| − | ###! Docs: https://docs.gitlab.com/omnibus/settings/redis.html#running-with-multiple-redis-instances
| |
| − | # gitlab_rails['redis_cache_instance'] = nil
| |
| − | # gitlab_rails['redis_cache_sentinels'] = nil
| |
| − | # gitlab_rails['redis_queues_instance'] = nil
| |
| − | # gitlab_rails['redis_queues_sentinels'] = nil
| |
| − | # gitlab_rails['redis_shared_state_instance'] = nil
| |
| − | # gitlab_rails['redis_shared_sentinels'] = nil
| |
| − | # gitlab_rails['redis_actioncable_instance'] = nil
| |
| − | # gitlab_rails['redis_actioncable_sentinels'] = nil
| |
| − | | |
| − | ################################################################################
| |
| − | ## Container Registry settings
| |
| − | ##! Docs: https://docs.gitlab.com/ee/administration/container_registry.html
| |
| − | ################################################################################
| |
| − | | |
| − | # registry_external_url 'https://registry.example.com'
| |
| − | | |
| − | ### Settings used by GitLab application
| |
| − | # gitlab_rails['registry_enabled'] = true
| |
| − | # gitlab_rails['registry_host'] = "registry.gitlab.example.com"
| |
| − | # gitlab_rails['registry_port'] = "5005"
| |
| − | # gitlab_rails['registry_path'] = "/var/opt/gitlab/gitlab-rails/shared/registry"
| |
| − | | |
| − | # Notification secret, it's used to authenticate notification requests to GitLab application
| |
| − | # You only need to change this when you use external Registry service, otherwise
| |
| − | # it will be taken directly from notification settings of your Registry
| |
| − | # gitlab_rails['registry_notification_secret'] = nil
| |
| − | | |
| − | ###! **Do not change the following 3 settings unless you know what you are
| |
| − | ###! doing**
| |
| − | # gitlab_rails['registry_api_url'] = "http://localhost:5000"
| |
| − | # gitlab_rails['registry_key_path'] = "/var/opt/gitlab/gitlab-rails/certificate.key"
| |
| − | # gitlab_rails['registry_issuer'] = "omnibus-gitlab-issuer"
| |
| − | | |
| − | ### Settings used by Registry application
| |
| − | # registry['enable'] = true
| |
| − | # registry['username'] = "registry"
| |
| − | # registry['group'] = "registry"
| |
| − | # registry['uid'] = nil
| |
| − | # registry['gid'] = nil
| |
| − | # registry['dir'] = "/var/opt/gitlab/registry"
| |
| − | # registry['registry_http_addr'] = "localhost:5000"
| |
| − | # registry['debug_addr'] = "localhost:5001"
| |
| − | # registry['log_directory'] = "/var/log/gitlab/registry"
| |
| − | # registry['env_directory'] = "/opt/gitlab/etc/registry/env"
| |
| − | # registry['env'] = {
| |
| − | # 'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
| |
| − | # }
| |
| − | # registry['log_level'] = "info"
| |
| − | # registry['log_formatter'] = "text"
| |
| − | # registry['rootcertbundle'] = "/var/opt/gitlab/registry/certificate.crt"
| |
| − | # registry['health_storagedriver_enabled'] = true
| |
| − | # registry['storage_delete_enabled'] = true
| |
| − | # registry['validation_enabled'] = false
| |
| − | # registry['autoredirect'] = false
| |
| − | # registry['compatibility_schema1_enabled'] = false
| |
| − | | |
| − | ### Registry backend storage
| |
| − | ###! Docs: https://docs.gitlab.com/ee/administration/packages/container_registry.html#configure-storage-for-the-container-registry
| |
| − | # registry['storage'] = {
| |
| − | # 's3' => {
| |
| − | # 'accesskey' => 's3-access-key',
| |
| − | # 'secretkey' => 's3-secret-key-for-access-key',
| |
| − | # 'bucket' => 'your-s3-bucket',
| |
| − | # 'region' => 'your-s3-region',
| |
| − | # 'regionendpoint' => 'your-s3-regionendpoint'
| |
| − | # },
| |
| − | # 'redirect' => {
| |
| − | # 'disable' => false
| |
| − | # }
| |
| − | # }
| |
| − | | |
| − | ### Registry notifications endpoints
| |
| − | # registry['notifications'] = [
| |
| − | # {
| |
| − | # 'name' => 'test_endpoint',
| |
| − | # 'url' => 'https://gitlab.example.com/notify2',
| |
| − | # 'timeout' => '500ms',
| |
| − | # 'threshold' => 5,
| |
| − | # 'backoff' => '1s',
| |
| − | # 'headers' => {
| |
| − | # "Authorization" => ["AUTHORIZATION_EXAMPLE_TOKEN"]
| |
| − | # }
| |
| − | # }
| |
| − | # ]
| |
| − | ### Default registry notifications
| |
| − | # registry['default_notifications_timeout'] = "500ms"
| |
| − | # registry['default_notifications_threshold'] = 5
| |
| − | # registry['default_notifications_backoff'] = "1s"
| |
| − | # registry['default_notifications_headers'] = {}
| |
| − | | |
| − | ################################################################################
| |
| − | ## Error Reporting and Logging with Sentry
| |
| − | ################################################################################
| |
| − | # gitlab_rails['sentry_enabled'] = false
| |
| − | # gitlab_rails['sentry_dsn'] = 'https://<key>@sentry.io/<project>'
| |
| − | # gitlab_rails['sentry_clientside_dsn'] = 'https://<key>@sentry.io/<project>'
| |
| − | # gitlab_rails['sentry_environment'] = 'production'
| |
| − | | |
| − | ################################################################################
| |
| − | ## CI_JOB_JWT
| |
| − | ################################################################################
| |
| − | ##! RSA private key used to sign CI_JOB_JWT
| |
| − | # gitlab_rails['ci_jwt_signing_key'] = nil # Will be generated if not set.
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Workhorse
| |
| − | ##! Docs: https://gitlab.com/gitlab-org/gitlab-workhorse/blob/master/README.md
| |
| − | ################################################################################
| |
| − | | |
| − | # gitlab_workhorse['enable'] = true
| |
| − | # gitlab_workhorse['ha'] = false
| |
| − | # gitlab_workhorse['alt_document_root'] = nil
| |
| − | # gitlab_workhorse['listen_network'] = "unix"
| |
| − | # gitlab_workhorse['listen_umask'] = 000
| |
| − | # gitlab_workhorse['listen_addr'] = "/var/opt/gitlab/gitlab-workhorse/sockets/socket"
| |
| − | # gitlab_workhorse['auth_backend'] = "http://localhost:8080"
| |
| − | | |
| − | ##! the empty string is the default in gitlab-workhorse option parser
| |
| − | # gitlab_workhorse['auth_socket'] = "''"
| |
| − | | |
| − | ##! put an empty string on the command line
| |
| − | # gitlab_workhorse['pprof_listen_addr'] = "''"
| |
| − | | |
| − | # gitlab_workhorse['prometheus_listen_addr'] = "localhost:9229"
| |
| − | | |
| − | # gitlab_workhorse['dir'] = "/var/opt/gitlab/gitlab-workhorse"
| |
| − | # gitlab_workhorse['log_directory'] = "/var/log/gitlab/gitlab-workhorse"
| |
| − | # gitlab_workhorse['proxy_headers_timeout'] = "1m0s"
| |
| − | | |
| − | ##! limit number of concurrent API requests, defaults to 0 which is unlimited
| |
| − | # gitlab_workhorse['api_limit'] = 0
| |
| − | | |
| − | ##! limit number of API requests allowed to be queued, defaults to 0 which
| |
| − | ##! disables queuing
| |
| − | # gitlab_workhorse['api_queue_limit'] = 0
| |
| − | | |
| − | ##! duration after which we timeout requests if they sit too long in the queue
| |
| − | # gitlab_workhorse['api_queue_duration'] = "30s"
| |
| − | | |
| − | ##! Long polling duration for job requesting for runners
| |
| − | # gitlab_workhorse['api_ci_long_polling_duration'] = "60s"
| |
| − | | |
| − | ##! Log format: default is json, can also be text or none.
| |
| − | # gitlab_workhorse['log_format'] = "json"
| |
| − | | |
| − | # gitlab_workhorse['env_directory'] = "/opt/gitlab/etc/gitlab-workhorse/env"
| |
| − | # gitlab_workhorse['env'] = {
| |
| − | # 'PATH' => "/opt/gitlab/bin:/opt/gitlab/embedded/bin:/bin:/usr/bin",
| |
| − | # 'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
| |
| − | # }
| |
| − | | |
| − | ##! Resource limitations for the dynamic image scaler.
| |
| − | ##! Exceeding these thresholds will cause Workhorse to serve images in their original size.
| |
| − | ##!
| |
| − | ##! Maximum number of scaler processes that are allowed to execute concurrently.
| |
| − | ##! It is recommended for this not to exceed the number of CPUs available.
| |
| − | # gitlab_workhorse['image_scaler_max_procs'] = 4
| |
| − | ##!
| |
| − | ##! Maximum file size in bytes for an image to be considered eligible for rescaling
| |
| − | # gitlab_workhorse['image_scaler_max_filesize'] = 250000
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab User Settings
| |
| − | ##! Modify default git user.
| |
| − | ##! Docs: https://docs.gitlab.com/omnibus/settings/configuration.html#changing-the-name-of-the-git-user-group
| |
| − | ################################################################################
| |
| − | | |
| − | # user['username'] = "git"
| |
| − | # user['group'] = "git"
| |
| − | # user['uid'] = nil
| |
| − | # user['gid'] = nil
| |
| − | | |
| − | ##! The shell for the git user
| |
| − | # user['shell'] = "/bin/sh"
| |
| − | | |
| − | ##! The home directory for the git user
| |
| − | # user['home'] = "/var/opt/gitlab"
| |
| − | | |
| − | # user['git_user_name'] = "GitLab"
| |
| − | # user['git_user_email'] = "gitlab@#{node['fqdn']}"
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Unicorn
| |
| − | ##! Tweak unicorn settings.
| |
| − | ##! Docs: https://docs.gitlab.com/omnibus/settings/unicorn.html
| |
| − | ################################################################################
| |
| − | | |
| − | # unicorn['enable'] = false
| |
| − | # unicorn['worker_timeout'] = 60
| |
| − | ###! Minimum worker_processes is 2 at this moment
| |
| − | ###! See https://gitlab.com/gitlab-org/gitlab-foss/issues/18771
| |
| − | # unicorn['worker_processes'] = 2
| |
| − | | |
| − | ### Advanced settings
| |
| − | # unicorn['listen'] = 'localhost'
| |
| − | # unicorn['port'] = 8080
| |
| − | # unicorn['socket'] = '/var/opt/gitlab/gitlab-rails/sockets/gitlab.socket'
| |
| − | # unicorn['pidfile'] = '/opt/gitlab/var/unicorn/unicorn.pid'
| |
| − | # unicorn['tcp_nopush'] = true
| |
| − | # unicorn['backlog_socket'] = 1024
| |
| − | | |
| − | ###! **Make sure somaxconn is equal or higher then backlog_socket**
| |
| − | # unicorn['somaxconn'] = 1024
| |
| − | | |
| − | ###! **We do not recommend changing this setting**
| |
| − | # unicorn['log_directory'] = "/var/log/gitlab/unicorn"
| |
| − | | |
| − | ### **Only change these settings if you understand well what they mean**
| |
| − | ###! Docs: https://docs.gitlab.com/ee/administration/operations/unicorn.html#unicorn-worker-killer
| |
| − | ###! https://github.com/kzk/unicorn-worker-killer
| |
| − | # unicorn['worker_memory_limit_min'] = "1024 * 1 << 20"
| |
| − | # unicorn['worker_memory_limit_max'] = "1280 * 1 << 20"
| |
| − | | |
| − | # unicorn['exporter_enabled'] = false
| |
| − | # unicorn['exporter_address'] = "127.0.0.1"
| |
| − | # unicorn['exporter_port'] = 8083
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Puma
| |
| − | ##! Tweak puma settings. You should only use Unicorn or Puma, not both.
| |
| − | ##! Docs: https://docs.gitlab.com/omnibus/settings/puma.html
| |
| − | ################################################################################
| |
| − | | |
| − | # puma['enable'] = true
| |
| − | # puma['ha'] = false
| |
| − | # puma['worker_timeout'] = 60
| |
| − | # puma['worker_processes'] = 2
| |
| − | # puma['min_threads'] = 4
| |
| − | # puma['max_threads'] = 4
| |
| − | | |
| − | ### Advanced settings
| |
| − | # puma['listen'] = '127.0.0.1'
| |
| − | # puma['port'] = 8080
| |
| − | # puma['socket'] = '/var/opt/gitlab/gitlab-rails/sockets/gitlab.socket'
| |
| − | # puma['somaxconn'] = 1024
| |
| − | | |
| − | # puma['pidfile'] = '/opt/gitlab/var/puma/puma.pid'
| |
| − | # puma['state_path'] = '/opt/gitlab/var/puma/puma.state'
| |
| − | | |
| − | ###! **We do not recommend changing this setting**
| |
| − | # puma['log_directory'] = "/var/log/gitlab/puma"
| |
| − | | |
| − | ### **Only change these settings if you understand well what they mean**
| |
| − | ###! Docs: https://github.com/schneems/puma_worker_killer
| |
| − | # puma['per_worker_max_memory_mb'] = 850
| |
| − | | |
| − | # puma['exporter_enabled'] = false
| |
| − | # puma['exporter_address'] = "127.0.0.1"
| |
| − | # puma['exporter_port'] = 8083
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Sidekiq
| |
| − | ################################################################################
| |
| − | | |
| − | ##! GitLab allows one to start multiple sidekiq processes. These
| |
| − | ##! processes can be used to consume a dedicated set of queues. This
| |
| − | ##! can be used to ensure certain queues are able to handle additional workload.
| |
| − | ##! https://docs.gitlab.com/ee/administration/operations/extra_sidekiq_processes.html
| |
| − | | |
| − | # sidekiq['log_directory'] = "/var/log/gitlab/sidekiq"
| |
| − | # sidekiq['log_format'] = "json"
| |
| − | # sidekiq['shutdown_timeout'] = 4
| |
| − | # sidekiq['cluster'] = true
| |
| − | # sidekiq['queue_selector'] = false
| |
| − | # sidekiq['interval'] = nil
| |
| − | # sidekiq['max_concurrency'] = 50
| |
| − | # sidekiq['min_concurrency'] = nil
| |
| − | | |
| − | ##! Each entry in the queue_groups array denotes a group of queues that have to be processed by a
| |
| − | ##! Sidekiq process. Multiple queues can be processed by the same process by
| |
| − | ##! separating them with a comma within the group entry, a `*` will process all queues
| |
| − | | |
| − | # sidekiq['queue_groups'] = ['*']
| |
| − | | |
| − | ##! If negate is enabled then sidekiq-cluster will process all the queues that
| |
| − | ##! don't match those in queue_groups.
| |
| − | | |
| − | # sidekiq['negate'] = false
| |
| − | | |
| − | # sidekiq['metrics_enabled'] = true
| |
| − | # sidekiq['exporter_log_enabled'] = false
| |
| − | # sidekiq['listen_address'] = "localhost"
| |
| − | # sidekiq['listen_port'] = 8082
| |
| − | | |
| − | ################################################################################
| |
| − | ## gitlab-shell
| |
| − | ################################################################################
| |
| − | | |
| − | # gitlab_shell['audit_usernames'] = false
| |
| − | # gitlab_shell['log_level'] = 'INFO'
| |
| − | # gitlab_shell['log_format'] = 'json'
| |
| − | # gitlab_shell['http_settings'] = { user: 'username', password: 'password', ca_file: '/etc/ssl/cert.pem', ca_path: '/etc/pki/tls/certs', self_signed_cert: false}
| |
| − | # gitlab_shell['log_directory'] = "/var/log/gitlab/gitlab-shell/"
| |
| − | # gitlab_shell['custom_hooks_dir'] = "/opt/gitlab/embedded/service/gitlab-shell/hooks"
| |
| − | | |
| − | # gitlab_shell['auth_file'] = "/var/opt/gitlab/.ssh/authorized_keys"
| |
| − | | |
| − | ### Migration to Go feature flags
| |
| − | ###! Docs: https://gitlab.com/gitlab-org/gitlab-shell#migration-to-go-feature-flags
| |
| − | # gitlab_shell['migration'] = { enabled: true, features: [] }
| |
| − | | |
| − | ### Git trace log file.
| |
| − | ###! If set, git commands receive GIT_TRACE* environment variables
| |
| − | ###! Docs: https://git-scm.com/book/es/v2/Git-Internals-Environment-Variables#Debugging
| |
| − | ###! An absolute path starting with / – the trace output will be appended to
| |
| − | ###! that file. It needs to exist so we can check permissions and avoid
| |
| − | ###! throwing warnings to the users.
| |
| − | # gitlab_shell['git_trace_log_file'] = "/var/log/gitlab/gitlab-shell/gitlab-shell-git-trace.log"
| |
| − | | |
| − | ##! **We do not recommend changing this directory.**
| |
| − | # gitlab_shell['dir'] = "/var/opt/gitlab/gitlab-shell"
| |
| − | | |
| − | ################################################################
| |
| − | ## GitLab PostgreSQL
| |
| − | ################################################################
| |
| − | | |
| − | ###! Changing any of these settings requires a restart of postgresql.
| |
| − | ###! By default, reconfigure reloads postgresql if it is running. If you
| |
| − | ###! change any of these settings, be sure to run `gitlab-ctl restart postgresql`
| |
| − | ###! after reconfigure in order for the changes to take effect.
| |
| − | # postgresql['enable'] = true
| |
| − | # postgresql['listen_address'] = nil
| |
| − | # postgresql['port'] = 5432
| |
| − | | |
| − | ## Only used when Patroni is enabled. This is the port that PostgreSQL responds to other
| |
| − | ## cluster members. This port is used by Patroni to advertize the PostgreSQL connection
| |
| − | ## endpoint to the cluster. By default it is the same as postgresql['port'].
| |
| − | # postgresql['connect_port'] = 5432
| |
| − | | |
| − | # postgresql['data_dir'] = "/var/opt/gitlab/postgresql/data"
| |
| − | | |
| − | ##! **recommend value is 1/4 of total RAM, up to 14GB.**
| |
| − | # postgresql['shared_buffers'] = "256MB"
| |
| − | | |
| − | ### Advanced settings
| |
| − | # postgresql['ha'] = false
| |
| − | # postgresql['dir'] = "/var/opt/gitlab/postgresql"
| |
| − | # postgresql['log_directory'] = "/var/log/gitlab/postgresql"
| |
| − | # postgresql['log_destination'] = nil
| |
| − | # postgresql['logging_collector'] = nil
| |
| − | # postgresql['log_truncate_on_rotation'] = nil
| |
| − | # postgresql['log_rotation_age'] = nil
| |
| − | # postgresql['log_rotation_size'] = nil
| |
| − | # postgresql['username'] = "gitlab-psql"
| |
| − | # postgresql['group'] = "gitlab-psql"
| |
| − | ##! `SQL_USER_PASSWORD_HASH` can be generated using the command `gitlab-ctl pg-password-md5 gitlab`
| |
| − | # postgresql['sql_user_password'] = 'SQL_USER_PASSWORD_HASH'
| |
| − | # postgresql['uid'] = nil
| |
| − | # postgresql['gid'] = nil
| |
| − | # postgresql['shell'] = "/bin/sh"
| |
| − | # postgresql['home'] = "/var/opt/gitlab/postgresql"
| |
| − | # postgresql['user_path'] = "/opt/gitlab/embedded/bin:/opt/gitlab/bin:$PATH"
| |
| − | # postgresql['sql_user'] = "gitlab"
| |
| − | # postgresql['max_connections'] = 200
| |
| − | # postgresql['md5_auth_cidr_addresses'] = []
| |
| − | # postgresql['trust_auth_cidr_addresses'] = []
| |
| − | # postgresql['wal_buffers'] = "-1"
| |
| − | # postgresql['autovacuum_max_workers'] = "3"
| |
| − | # postgresql['autovacuum_freeze_max_age'] = "200000000"
| |
| − | # postgresql['log_statement'] = nil
| |
| − | # postgresql['track_activity_query_size'] = "1024"
| |
| − | # postgresql['shared_preload_libraries'] = nil
| |
| − | # postgresql['dynamic_shared_memory_type'] = nil
| |
| − | # postgresql['hot_standby'] = "off"
| |
| − | | |
| − | ### SSL settings
| |
| − | # See https://www.postgresql.org/docs/11/static/runtime-config-connection.html#GUC-SSL-CERT-FILE for more details
| |
| − | # postgresql['ssl'] = 'on'
| |
| − | # postgresql['hostssl'] = false
| |
| − | # postgresql['ssl_ciphers'] = 'HIGH:MEDIUM:+3DES:!aNULL:!SSLv3:!TLSv1'
| |
| − | # postgresql['ssl_cert_file'] = 'server.crt'
| |
| − | # postgresql['ssl_key_file'] = 'server.key'
| |
| − | # postgresql['ssl_ca_file'] = '/opt/gitlab/embedded/ssl/certs/cacert.pem'
| |
| − | # postgresql['ssl_crl_file'] = nil
| |
| − | # postgresql['cert_auth_addresses'] = {
| |
| − | # 'ADDRESS' => {
| |
| − | # database: 'gitlabhq_production',
| |
| − | # user: 'gitlab'
| |
| − | # }
| |
| − | # }
| |
| − | | |
| − | ### Replication settings
| |
| − | ###! Note, some replication settings do not require a full restart. They are documented below.
| |
| − | # postgresql['wal_level'] = "hot_standby"
| |
| − | # postgresql['wal_log_hints'] = 'off'
| |
| − | # postgresql['max_wal_senders'] = 5
| |
| − | # postgresql['max_replication_slots'] = 0
| |
| − | # postgresql['max_locks_per_transaction'] = 128
| |
| − | | |
| − | # Backup/Archive settings
| |
| − | # postgresql['archive_mode'] = "off"
| |
| − | | |
| − | ###! Changing any of these settings only requires a reload of postgresql. You do not need to
| |
| − | ###! restart postgresql if you change any of these and run reconfigure.
| |
| − | # postgresql['work_mem'] = "16MB"
| |
| − | # postgresql['maintenance_work_mem'] = "16MB"
| |
| − | # postgresql['checkpoint_segments'] = 10
| |
| − | # postgresql['checkpoint_timeout'] = "5min"
| |
| − | # postgresql['checkpoint_completion_target'] = 0.9
| |
| − | # postgresql['effective_io_concurrency'] = 1
| |
| − | # postgresql['checkpoint_warning'] = "30s"
| |
| − | # postgresql['effective_cache_size'] = "1MB"
| |
| − | # postgresql['shmmax'] = 17179869184 # or 4294967295
| |
| − | # postgresql['shmall'] = 4194304 # or 1048575
| |
| − | # postgresql['autovacuum'] = "on"
| |
| − | # postgresql['log_autovacuum_min_duration'] = "-1"
| |
| − | # postgresql['autovacuum_naptime'] = "1min"
| |
| − | # postgresql['autovacuum_vacuum_threshold'] = "50"
| |
| − | # postgresql['autovacuum_analyze_threshold'] = "50"
| |
| − | # postgresql['autovacuum_vacuum_scale_factor'] = "0.02"
| |
| − | # postgresql['autovacuum_analyze_scale_factor'] = "0.01"
| |
| − | # postgresql['autovacuum_vacuum_cost_delay'] = "20ms"
| |
| − | # postgresql['autovacuum_vacuum_cost_limit'] = "-1"
| |
| − | # postgresql['statement_timeout'] = "60000"
| |
| − | # postgresql['idle_in_transaction_session_timeout'] = "60000"
| |
| − | # postgresql['log_line_prefix'] = "%a"
| |
| − | # postgresql['max_worker_processes'] = 8
| |
| − | # postgresql['max_parallel_workers_per_gather'] = 0
| |
| − | # postgresql['log_lock_waits'] = 1
| |
| − | # postgresql['deadlock_timeout'] = '5s'
| |
| − | # postgresql['track_io_timing'] = 0
| |
| − | # postgresql['default_statistics_target'] = 1000
| |
| − | | |
| − | ### Available in PostgreSQL 9.6 and later
| |
| − | # postgresql['min_wal_size'] = "80MB"
| |
| − | # postgresql['max_wal_size'] = "1GB"
| |
| − | | |
| − | # Backup/Archive settings
| |
| − | # postgresql['archive_command'] = nil
| |
| − | # postgresql['archive_timeout'] = "0"
| |
| − | | |
| − | ### Replication settings
| |
| − | # postgresql['sql_replication_user'] = "gitlab_replicator"
| |
| − | # postgresql['sql_replication_password'] = "md5 hash of postgresql password" # You can generate with `gitlab-ctl pg-password-md5 <dbuser>`
| |
| − | # postgresql['wal_keep_segments'] = 10
| |
| − | # postgresql['max_standby_archive_delay'] = "30s"
| |
| − | # postgresql['max_standby_streaming_delay'] = "30s"
| |
| − | # postgresql['synchronous_commit'] = on
| |
| − | # postgresql['synchronous_standby_names'] = ''
| |
| − | # postgresql['hot_standby_feedback'] = 'off'
| |
| − | # postgresql['random_page_cost'] = 2.0
| |
| − | # postgresql['log_temp_files'] = -1
| |
| − | # postgresql['log_checkpoints'] = 'off'
| |
| − | # To add custom entries to pg_hba.conf use the following
| |
| − | # postgresql['custom_pg_hba_entries'] = {
| |
| − | # APPLICATION: [ # APPLICATION should identify what the settings are used for
| |
| − | # {
| |
| − | # type: example,
| |
| − | # database: example,
| |
| − | # user: example,
| |
| − | # cidr: example,
| |
| − | # method: example,
| |
| − | # option: example
| |
| − | # }
| |
| − | # ]
| |
| − | # }
| |
| − | # See https://www.postgresql.org/docs/11/static/auth-pg-hba-conf.html for an explanation
| |
| − | # of the values
| |
| − | | |
| − | ### Version settings
| |
| − | # Set this if you have disabled the bundled PostgreSQL but still want to use the backup rake tasks
| |
| − | # postgresql['version'] = 10
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Redis
| |
| − | ##! **Can be disabled if you are using your own Redis instance.**
| |
| − | ##! Docs: https://docs.gitlab.com/omnibus/settings/redis.html
| |
| − | ################################################################################
| |
| − | | |
| − | # redis['enable'] = true
| |
| − | # redis['ha'] = false
| |
| − | # redis['hz'] = 10
| |
| − | # redis['dir'] = "/var/opt/gitlab/redis"
| |
| − | # redis['log_directory'] = "/var/log/gitlab/redis"
| |
| − | # redis['username'] = "gitlab-redis"
| |
| − | # redis['group'] = "gitlab-redis"
| |
| − | # redis['maxclients'] = "10000"
| |
| − | # redis['maxmemory'] = "0"
| |
| − | # redis['maxmemory_policy'] = "noeviction"
| |
| − | # redis['maxmemory_samples'] = "5"
| |
| − | # redis['tcp_backlog'] = 511
| |
| − | # redis['tcp_timeout'] = "60"
| |
| − | # redis['tcp_keepalive'] = "300"
| |
| − | # redis['uid'] = nil
| |
| − | # redis['gid'] = nil
| |
| − | | |
| − | ### Disable or obfuscate unnecessary redis command names
| |
| − | ### Uncomment and edit this block to add or remove entries.
| |
| − | ### See https://docs.gitlab.com/omnibus/settings/redis.html#renamed-commands
| |
| − | ### for detailed usage
| |
| − | ###
| |
| − | # redis['rename_commands'] = {
| |
| − | # 'KEYS': ''
| |
| − | #}
| |
| − | #
| |
| − | | |
| − | ###! **To enable only Redis service in this machine, uncomment
| |
| − | ###! one of the lines below (choose master or replica instance types).**
| |
| − | ###! Docs: https://docs.gitlab.com/omnibus/settings/redis.html
| |
| − | ###! https://docs.gitlab.com/ee/administration/high_availability/redis.html
| |
| − | # redis_master_role['enable'] = true
| |
| − | # redis_replica_role['enable'] = true
| |
| − | | |
| − | ### Redis TCP support (will disable UNIX socket transport)
| |
| − | # redis['bind'] = '0.0.0.0' # or specify an IP to bind to a single one
| |
| − | # redis['port'] = 6379
| |
| − | # redis['password'] = 'redis-password-goes-here'
| |
| − | | |
| − | ### Redis Sentinel support
| |
| − | ###! **You need a master replica Redis replication to be able to do failover**
| |
| − | ###! **Please read the documentation before enabling it to understand the
| |
| − | ###! caveats:**
| |
| − | ###! Docs: https://docs.gitlab.com/ee/administration/high_availability/redis.html
| |
| − | | |
| − | ### Replication support
| |
| − | #### Replica Redis instance
| |
| − | # redis['master'] = false # by default this is true
| |
| − | | |
| − | #### Replica and Sentinel shared configuration
| |
| − | ####! **Both need to point to the master Redis instance to get replication and
| |
| − | ####! heartbeat monitoring**
| |
| − | # redis['master_name'] = 'gitlab-redis'
| |
| − | # redis['master_ip'] = nil
| |
| − | # redis['master_port'] = 6379
| |
| − | | |
| − | #### Support to run redis replicas in a Docker or NAT environment
| |
| − | ####! Docs: https://redis.io/topics/replication#configuring-replication-in-docker-and-nat
| |
| − | # redis['announce_ip'] = nil
| |
| − | # redis['announce_port'] = nil
| |
| − | | |
| − | ####! **Master password should have the same value defined in
| |
| − | ####! redis['password'] to enable the instance to transition to/from
| |
| − | ####! master/replica in a failover event.**
| |
| − | # redis['master_password'] = 'redis-password-goes-here'
| |
| − | | |
| − | ####! Increase these values when your replicas can't catch up with master
| |
| − | # redis['client_output_buffer_limit_normal'] = '0 0 0'
| |
| − | # redis['client_output_buffer_limit_replica'] = '256mb 64mb 60'
| |
| − | # redis['client_output_buffer_limit_pubsub'] = '32mb 8mb 60'
| |
| − | | |
| − | #####! Redis snapshotting frequency
| |
| − | #####! Set to [] to disable
| |
| − | #####! Set to [''] to clear previously set values
| |
| − | # redis['save'] = [ '900 1', '300 10', '60 10000' ]
| |
| − | | |
| − | #####! Redis lazy freeing
| |
| − | #####! Defaults to false
| |
| − | # redis['lazyfree_lazy_eviction'] = true
| |
| − | # redis['lazyfree_lazy_expire'] = true
| |
| − | # redis['lazyfree_lazy_server_del'] = true
| |
| − | # redis['replica_lazy_flush'] = true
| |
| − | | |
| − | #####! Redis threaded I/O
| |
| − | #####! Defaults to disabled
| |
| − | # redis['io_threads'] = 4
| |
| − | # redis['io_threads_do_reads'] = true
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Web server
| |
| − | ##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html#using-a-non-bundled-web-server
| |
| − | ################################################################################
| |
| − | | |
| − | ##! When bundled nginx is disabled we need to add the external webserver user to
| |
| − | ##! the GitLab webserver group.
| |
| − | # web_server['external_users'] = []
| |
| − | # web_server['username'] = 'gitlab-www'
| |
| − | # web_server['group'] = 'gitlab-www'
| |
| − | # web_server['uid'] = nil
| |
| − | # web_server['gid'] = nil
| |
| − | # web_server['shell'] = '/bin/false'
| |
| − | # web_server['home'] = '/var/opt/gitlab/nginx'
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab NGINX
| |
| − | ##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html
| |
| − | ################################################################################
| |
| − | | |
| − | # nginx['enable'] = true
| |
| − | # nginx['client_max_body_size'] = '250m'
| |
| − | # nginx['redirect_http_to_https'] = false
| |
| − | # nginx['redirect_http_to_https_port'] = 80
| |
| − | | |
| − | ##! Most root CA's are included by default
| |
| − | # nginx['ssl_client_certificate'] = "/etc/gitlab/ssl/ca.crt"
| |
| − | | |
| − | ##! enable/disable 2-way SSL client authentication
| |
| − | # nginx['ssl_verify_client'] = "off"
| |
| − | | |
| − | ##! if ssl_verify_client on, verification depth in the client certificates chain
| |
| − | # nginx['ssl_verify_depth'] = "1"
| |
| − | | |
| − | # nginx['ssl_certificate'] = "/etc/gitlab/ssl/#{node['fqdn']}.crt"
| |
| − | # nginx['ssl_certificate_key'] = "/etc/gitlab/ssl/#{node['fqdn']}.key"
| |
| − | # nginx['ssl_ciphers'] = "ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256"
| |
| − | # nginx['ssl_prefer_server_ciphers'] = "on"
| |
| − | | |
| − | ##! **Recommended by: https://raymii.org/s/tutorials/Strong_SSL_Security_On_nginx.html
| |
| − | ##! https://cipherli.st/**
| |
| − | # nginx['ssl_protocols'] = "TLSv1.2 TLSv1.3"
| |
| − | | |
| − | ##! **Recommended in: https://nginx.org/en/docs/http/ngx_http_ssl_module.html**
| |
| − | # nginx['ssl_session_cache'] = "builtin:1000 shared:SSL:10m"
| |
| − | | |
| − | ##! **Default according to https://nginx.org/en/docs/http/ngx_http_ssl_module.html**
| |
| − | # nginx['ssl_session_timeout'] = "5m"
| |
| − | | |
| − | # nginx['ssl_dhparam'] = nil # Path to dhparams.pem, eg. /etc/gitlab/ssl/dhparams.pem
| |
| − | # nginx['listen_addresses'] = ['*', '[::]']
| |
| − | | |
| − | ##! **Defaults to forcing web browsers to always communicate using only HTTPS**
| |
| − | ##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html#setting-http-strict-transport-security
| |
| − | # nginx['hsts_max_age'] = 31536000
| |
| − | # nginx['hsts_include_subdomains'] = false
| |
| − | | |
| − | ##! Defaults to stripping path information when making cross-origin requests
| |
| − | # nginx['referrer_policy'] = 'strict-origin-when-cross-origin'
| |
| − | | |
| − | ##! **Docs: http://nginx.org/en/docs/http/ngx_http_gzip_module.html**
| |
| − | # nginx['gzip_enabled'] = true
| |
| − | | |
| − | ##! **Override only if you use a reverse proxy**
| |
| − | ##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html#setting-the-nginx-listen-port
| |
| − | # nginx['listen_port'] = nil
| |
| − | | |
| − | ##! **Override only if your reverse proxy internally communicates over HTTP**
| |
| − | ##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html#supporting-proxied-ssl
| |
| − | # nginx['listen_https'] = nil
| |
| − | | |
| − | # nginx['custom_gitlab_server_config'] = "location ^~ /foo-namespace/bar-project/raw/ {\n deny all;\n}\n"
| |
| − | # nginx['custom_nginx_config'] = "include /etc/nginx/conf.d/example.conf;"
| |
| − | # nginx['proxy_read_timeout'] = 3600
| |
| − | # nginx['proxy_connect_timeout'] = 300
| |
| − | # nginx['proxy_set_headers'] = {
| |
| − | # "Host" => "$http_host_with_default",
| |
| − | # "X-Real-IP" => "$remote_addr",
| |
| − | # "X-Forwarded-For" => "$proxy_add_x_forwarded_for",
| |
| − | # "X-Forwarded-Proto" => "https",
| |
| − | # "X-Forwarded-Ssl" => "on",
| |
| − | # "Upgrade" => "$http_upgrade",
| |
| − | # "Connection" => "$connection_upgrade"
| |
| − | # }
| |
| − | # nginx['proxy_cache_path'] = 'proxy_cache keys_zone=gitlab:10m max_size=1g levels=1:2'
| |
| − | # nginx['proxy_cache'] = 'gitlab'
| |
| − | # nginx['http2_enabled'] = true
| |
| − | # nginx['real_ip_trusted_addresses'] = []
| |
| − | # nginx['real_ip_header'] = nil
| |
| − | # nginx['real_ip_recursive'] = nil
| |
| − | # nginx['custom_error_pages'] = {
| |
| − | # '404' => {
| |
| − | # 'title' => 'Example title',
| |
| − | # 'header' => 'Example header',
| |
| − | # 'message' => 'Example message'
| |
| − | # }
| |
| − | # }
| |
| − | | |
| − | ### Advanced settings
| |
| − | # nginx['dir'] = "/var/opt/gitlab/nginx"
| |
| − | # nginx['log_directory'] = "/var/log/gitlab/nginx"
| |
| − | # nginx['worker_processes'] = 4
| |
| − | # nginx['worker_connections'] = 10240
| |
| − | # nginx['log_format'] = '$remote_addr - $remote_user [$time_local] "$request_method $filtered_request_uri $server_protocol" $status $body_bytes_sent "$filtered_http_referer" "$http_user_agent" $gzip_ratio'
| |
| − | # nginx['sendfile'] = 'on'
| |
| − | # nginx['tcp_nopush'] = 'on'
| |
| − | # nginx['tcp_nodelay'] = 'on'
| |
| − | # nginx['gzip'] = "on"
| |
| − | # nginx['gzip_http_version'] = "1.0"
| |
| − | # nginx['gzip_comp_level'] = "2"
| |
| − | # nginx['gzip_proxied'] = "any"
| |
| − | # nginx['gzip_types'] = [ "text/plain", "text/css", "application/x-javascript", "text/xml", "application/xml", "application/xml+rss", "text/javascript", "application/json" ]
| |
| − | # nginx['keepalive_timeout'] = 65
| |
| − | # nginx['cache_max_size'] = '5000m'
| |
| − | # nginx['server_names_hash_bucket_size'] = 64
| |
| − | ##! These paths have proxy_request_buffering disabled
| |
| − | # nginx['request_buffering_off_path_regex'] = "/api/v\\d/jobs/\\d+/artifacts$|\\.git/git-receive-pack$|\\.git/gitlab-lfs/objects|\\.git/info/lfs/objects/batch$"
| |
| − | | |
| − | ### Nginx status
| |
| − | # nginx['status'] = {
| |
| − | # "enable" => true,
| |
| − | # "listen_addresses" => ["127.0.0.1"],
| |
| − | # "fqdn" => "dev.example.com",
| |
| − | # "port" => 9999,
| |
| − | # "vts_enable" => true,
| |
| − | # "options" => {
| |
| − | # "server_tokens" => "off", # Don't show the version of NGINX
| |
| − | # "access_log" => "off", # Disable logs for stats
| |
| − | # "allow" => "127.0.0.1", # Only allow access from localhost
| |
| − | # "deny" => "all" # Deny access to anyone else
| |
| − | # }
| |
| − | # }
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Logging
| |
| − | ##! Docs: https://docs.gitlab.com/omnibus/settings/logs.html
| |
| − | ################################################################################
| |
| − | | |
| − | # logging['svlogd_size'] = 200 * 1024 * 1024 # rotate after 200 MB of log data
| |
| − | # logging['svlogd_num'] = 30 # keep 30 rotated log files
| |
| − | # logging['svlogd_timeout'] = 24 * 60 * 60 # rotate after 24 hours
| |
| − | # logging['svlogd_filter'] = "gzip" # compress logs with gzip
| |
| − | # logging['svlogd_udp'] = nil # transmit log messages via UDP
| |
| − | # logging['svlogd_prefix'] = nil # custom prefix for log messages
| |
| − | # logging['logrotate_frequency'] = "daily" # rotate logs daily
| |
| − | # logging['logrotate_maxsize'] = nil # rotate logs when they grow bigger than size bytes even before the specified time interval (daily, weekly, monthly, or yearly)
| |
| − | # logging['logrotate_size'] = nil # do not rotate by size by default
| |
| − | # logging['logrotate_rotate'] = 30 # keep 30 rotated logs
| |
| − | # logging['logrotate_compress'] = "compress" # see 'man logrotate'
| |
| − | # logging['logrotate_method'] = "copytruncate" # see 'man logrotate'
| |
| − | # logging['logrotate_postrotate'] = nil # no postrotate command by default
| |
| − | # logging['logrotate_dateformat'] = nil # use date extensions for rotated files rather than numbers e.g. a value of "-%Y-%m-%d" would give rotated files like production.log-2016-03-09.gz
| |
| − | | |
| − | ### UDP log forwarding
| |
| − | ##! Docs: http://docs.gitlab.com/omnibus/settings/logs.html#udp-log-forwarding
| |
| − | | |
| − | ##! remote host to ship log messages to via UDP
| |
| − | # logging['udp_log_shipping_host'] = nil
| |
| − | | |
| − | ##! override the hostname used when logs are shipped via UDP,
| |
| − | ## by default the system hostname will be used.
| |
| − | # logging['udp_log_shipping_hostname'] = nil
| |
| − | | |
| − | ##! remote port to ship log messages to via UDP
| |
| − | # logging['udp_log_shipping_port'] = 514
| |
| − | | |
| − | ################################################################################
| |
| − | ## Logrotate
| |
| − | ##! Docs: https://docs.gitlab.com/omnibus/settings/logs.html#logrotate
| |
| − | ##! You can disable built in logrotate feature.
| |
| − | ################################################################################
| |
| − | # logrotate['enable'] = true
| |
| − | # logrotate['log_directory'] = "/var/log/gitlab/logrotate"
| |
| − | | |
| − | ################################################################################
| |
| − | ## Users and groups accounts
| |
| − | ##! Disable management of users and groups accounts.
| |
| − | ##! **Set only if creating accounts manually**
| |
| − | ##! Docs: https://docs.gitlab.com/omnibus/settings/configuration.html#disable-user-and-group-account-management
| |
| − | ################################################################################
| |
| − | | |
| − | # manage_accounts['enable'] = false
| |
| − | | |
| − | ################################################################################
| |
| − | ## Storage directories
| |
| − | ##! Disable managing storage directories
| |
| − | ##! Docs: https://docs.gitlab.com/omnibus/settings/configuration.html#disable-storage-directories-management
| |
| − | ################################################################################
| |
| − | | |
| − | ##! **Set only if the select directories are created manually**
| |
| − | # manage_storage_directories['enable'] = false
| |
| − | # manage_storage_directories['manage_etc'] = false
| |
| − | | |
| − | ################################################################################
| |
| − | ## Runtime directory
| |
| − | ##! Docs: https://docs.gitlab.com//omnibus/settings/configuration.html#configuring-runtime-directory
| |
| − | ################################################################################
| |
| − | | |
| − | # runtime_dir '/run'
| |
| − | | |
| − | ################################################################################
| |
| − | ## Git
| |
| − | ##! Advanced setting for configuring git system settings for omnibus-gitlab
| |
| − | ##! internal git
| |
| − | ################################################################################
| |
| − | | |
| − | ##! For multiple options under one header use array of comma separated values,
| |
| − | ##! eg.:
| |
| − | ##! { "receive" => ["fsckObjects = true"], "alias" => ["st = status", "co = checkout"] }
| |
| − | | |
| − | # omnibus_gitconfig['system'] = {
| |
| − | # "pack" => ["threads = 1"],
| |
| − | # "receive" => ["fsckObjects = true", "advertisePushOptions = true"],
| |
| − | # "repack" => ["writeBitmaps = true"],
| |
| − | # "transfer" => ["hideRefs=^refs/tmp/", "hideRefs=^refs/keep-around/", "hideRefs=^refs/remotes/"],
| |
| − | # "core" => [
| |
| − | # 'alternateRefsCommand="exit 0 #"',
| |
| − | # "fsyncObjectFiles = true"
| |
| − | # ],
| |
| − | # "fetch" => ["writeCommitGraph = true"]
| |
| − | # }
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Pages
| |
| − | ##! Docs: https://docs.gitlab.com/ee/pages/administration.html
| |
| − | ################################################################################
| |
| − | | |
| − | ##! Define to enable GitLab Pages
| |
| − | # pages_external_url "http://pages.example.com/"
| |
| − | # gitlab_pages['enable'] = false
| |
| − | | |
| − | ##! Configure to expose GitLab Pages on external IP address, serving the HTTP
| |
| − | # gitlab_pages['external_http'] = []
| |
| − | | |
| − | ##! Configure to expose GitLab Pages on external IP address, serving the HTTPS
| |
| − | # gitlab_pages['external_https'] = []
| |
| − | | |
| − | ##! Configure to expose GitLab Pages on external IP address, serving the HTTPS over PROXYv2
| |
| − | # gitlab_pages['external_https_proxyv2'] = []
| |
| − | | |
| − | ##! Configure to use the default list of cipher suites
| |
| − | # gitlab_pages['insecure_ciphers'] = false
| |
| − | | |
| − | ##! Configure to enable health check endpoint on GitLab Pages
| |
| − | # gitlab_pages['status_uri'] = "/@status"
| |
| − | | |
| − | ##! Tune the maximum number of concurrent connections GitLab Pages will handle.
| |
| − | ##! Default to 0 for unlimited connections.
| |
| − | # gitlab_pages['max_connections'] = 0
| |
| − | | |
| − | ##! Setting the propagate_correlation_id to true allows installations behind a reverse proxy
| |
| − | ##! generate and set a correlation ID to requests sent to GitLab Pages. If a reverse proxy
| |
| − | ##! sets the header value X-Request-ID, the value will be propagated in the request chain.
| |
| − | # gitlab_pages['propagate_correlation_id'] = false
| |
| − | | |
| − | ##! Configure to use JSON structured logging in GitLab Pages
| |
| − | # gitlab_pages['log_format'] = "json"
| |
| − | | |
| − | ##! Configure verbose logging for GitLab Pages
| |
| − | # gitlab_pages['log_verbose'] = false
| |
| − | | |
| − | ##! Error Reporting and Logging with Sentry
| |
| − | # gitlab_pages['sentry_enabled'] = false
| |
| − | # gitlab_pages['sentry_dsn'] = 'https://<key>@sentry.io/<project>'
| |
| − | # gitlab_pages['sentry_environment'] = 'production'
| |
| − | | |
| − | ##! Listen for requests forwarded by reverse proxy
| |
| − | # gitlab_pages['listen_proxy'] = "localhost:8090"
| |
| − | | |
| − | # gitlab_pages['redirect_http'] = true
| |
| − | # gitlab_pages['use_http2'] = true
| |
| − | # gitlab_pages['dir'] = "/var/opt/gitlab/gitlab-pages"
| |
| − | # gitlab_pages['log_directory'] = "/var/log/gitlab/gitlab-pages"
| |
| − | | |
| − | # gitlab_pages['artifacts_server'] = true
| |
| − | # gitlab_pages['artifacts_server_url'] = nil # Defaults to external_url + '/api/v4'
| |
| − | # gitlab_pages['artifacts_server_timeout'] = 10
| |
| − | | |
| − | ##! Environments that do not support bind-mounting should set this parameter to
| |
| − | ##! true. This is incompatible with the artifacts server
| |
| − | # gitlab_pages['inplace_chroot'] = false
| |
| − | | |
| − | ##! Prometheus metrics for Pages docs: https://gitlab.com/gitlab-org/gitlab-pages/#enable-prometheus-metrics
| |
| − | # gitlab_pages['metrics_address'] = ":9235"
| |
| − | | |
| − | ##! Specifies the minimum SSL/TLS version ("ssl3", "tls1.0", "tls1.1" or "tls1.2")
| |
| − | # gitlab_pages['tls_min_version'] = "ssl3"
| |
| − | | |
| − | ##! Specifies the maximum SSL/TLS version ("ssl3", "tls1.0", "tls1.1" or "tls1.2")
| |
| − | # gitlab_pages['tls_max_version'] = "tls1.2"
| |
| − | | |
| − | ##! Pages access control
| |
| − | # gitlab_pages['access_control'] = false
| |
| − | # gitlab_pages['gitlab_id'] = nil # Automatically generated if not present
| |
| − | # gitlab_pages['gitlab_secret'] = nil # Generated if not present
| |
| − | # gitlab_pages['auth_redirect_uri'] = nil # Defaults to projects subdomain of pages_external_url and + '/auth'
| |
| − | # gitlab_pages['gitlab_server'] = nil # Defaults to external_url
| |
| − | # gitlab_pages['internal_gitlab_server'] = nil # Defaults to gitlab_server, can be changed to internal load balancer
| |
| − | # gitlab_pages['auth_secret'] = nil # Generated if not present
| |
| − | # gitlab_pages['auth_scope'] = nil # Defaults to api, can be changed to read_api to increase security
| |
| − | | |
| − | ##! GitLab API HTTP client connection timeout
| |
| − | # gitlab_pages['gitlab_client_http_timeout'] = "10s"
| |
| − | | |
| − | ##! GitLab API JWT Token expiry time
| |
| − | # gitlab_pages['gitlab_client_jwt_expiry'] = "30s"
| |
| − | | |
| − | ##! Domain configuration source, defaults to disk if set to nil
| |
| − | # gitlab_pages['domain_config_source'] = nil
| |
| − | | |
| − | ##! Advanced settings for API-based configuration for GitLab Pages.
| |
| − | ##! The recommended default values are set inside GitLab Pages.
| |
| − | ##! Should be changed only if absolutely needed.
| |
| − | | |
| − | ##! The maximum time a domain's configuration is stored in the cache.
| |
| − | # gitlab_pages['gitlab_cache_expiry'] = "600s"
| |
| − | ##! The interval at which a domain's configuration is set to be due to refresh (default: 60s).
| |
| − | # gitlab_pages['gitlab_cache_refresh'] = "60s"
| |
| − | ##! The interval at which expired items are removed from the cache (default: 60s).
| |
| − | # gitlab_pages['gitlab_cache_cleanup'] = "60s"
| |
| − | ##! The maximum time to wait for a response from the GitLab API per request.
| |
| − | # gitlab_pages['gitlab_retrieval_timeout'] = "30s"
| |
| − | ##! The interval to wait before retrying to resolve a domain's configuration via the GitLab API.
| |
| − | # gitlab_pages['gitlab_retrieval_interval'] = "1s"
| |
| − | ##! The maximum number of times to retry to resolve a domain's configuration via the API
| |
| − | # gitlab_pages['gitlab_retrieval_retries'] = 3
| |
| − | | |
| − | ##! Define custom gitlab-pages HTTP headers for the whole instance
| |
| − | # gitlab_pages['headers'] = []
| |
| − | | |
| − | ##! Shared secret used for authentication between Pages and GitLab
| |
| − | # gitlab_pages['api_secret_key'] = nil # Will be generated if not set. Base64 encoded and exactly 32 bytes long.
| |
| − | | |
| − | ##! Advanced settings for serving GitLab Pages from zip archives.
| |
| − | ##! The recommended default values are set inside GitLab Pages.
| |
| − | ##! Should be changed only if absolutely needed.
| |
| − | | |
| − | ##! The maximum time an archive will be cached in memory.
| |
| − | # gitlab_pages['zip_cache_expiration'] = "60s"
| |
| − | ##! Zip archive cache cleaning interval.
| |
| − | # gitlab_pages['zip_cache_cleanup'] = "30s"
| |
| − | ##! The interval to refresh a cache archive if accessed before expiring.
| |
| − | # gitlab_pages['zip_cache_refresh'] = "30s"
| |
| − | ##! The maximum amount of time it takes to open a zip archive from the file system or object storage.
| |
| − | # gitlab_pages['zip_open_timeout'] = "30s"
| |
| − | | |
| − | # gitlab_pages['env_directory'] = "/opt/gitlab/etc/gitlab-pages/env"
| |
| − | # gitlab_pages['env'] = {
| |
| − | # 'SSL_CERT_DIR' => "#{node['package']['install-dir']}/embedded/ssl/certs/"
| |
| − | # }
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Pages NGINX
| |
| − | ################################################################################
| |
| − | | |
| − | # All the settings defined in the "GitLab Nginx" section are also available in
| |
| − | # this "GitLab Pages NGINX" section, using the key `pages_nginx`. However,
| |
| − | # those settings should be explicitly set. That is, settings given as
| |
| − | # `nginx['some_setting']` WILL NOT be automatically replicated as
| |
| − | # `pages_nginx['some_setting']` and should be set separately.
| |
| − | | |
| − | # Below you can find settings that are exclusive to "GitLab Pages NGINX"
| |
| − | # pages_nginx['enable'] = true
| |
| − | | |
| − | # gitlab_rails['pages_path'] = "/var/opt/gitlab/gitlab-rails/shared/pages"
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab CI
| |
| − | ##! Docs: https://docs.gitlab.com/ee/ci/quick_start/README.html
| |
| − | ################################################################################
| |
| − | | |
| − | # gitlab_ci['gitlab_ci_all_broken_builds'] = true
| |
| − | # gitlab_ci['gitlab_ci_add_pusher'] = true
| |
| − | # gitlab_ci['builds_directory'] = '/var/opt/gitlab/gitlab-ci/builds'
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Kubernetes Agent Server
| |
| − | ##! Docs: https://gitlab.com/gitlab-org/cluster-integration/gitlab-agent/blob/master/README.md
| |
| − | ################################################################################
| |
| − | | |
| − | ##! Settings used by the GitLab application
| |
| − | # gitlab_rails['gitlab_kas_enabled'] = true
| |
| − | # gitlab_rails['gitlab_kas_external_url'] = ws://gitlab.example.com/-/kubernetes-agent
| |
| − | # gitlab_rails['gitlab_kas_internal_url'] = grpc://localhost:8153
| |
| − | | |
| − | ##! Enable GitLab KAS
| |
| − | # gitlab_kas['enable'] = true
| |
| − | | |
| − | ##! Agent configuration for GitLab KAS
| |
| − | # gitlab_kas['agent_configuration_poll_period'] = 20
| |
| − | # gitlab_kas['agent_gitops_poll_period'] = 20
| |
| − | # gitlab_kas['agent_gitops_project_info_cache_ttl'] = 300
| |
| − | # gitlab_kas['agent_gitops_project_info_cache_error_ttl'] = 60
| |
| − | # gitlab_kas['agent_info_cache_ttl'] = 300
| |
| − | # gitlab_kas['agent_info_cache_error_ttl'] = 60
| |
| − | | |
| − | ##! Shared secret used for authentication between KAS and GitLab
| |
| − | # gitlab_kas['api_secret_key'] = nil # Will be generated if not set. Base64 encoded and exactly 32 bytes long.
| |
| − | | |
| − | ##! Listen configuration for GitLab KAS
| |
| − | # gitlab_kas['listen_address'] = 'localhost:8150'
| |
| − | # gitlab_kas['listen_network'] = 'tcp'
| |
| − | # gitlab_kas['listen_websocket'] = true
| |
| − | # gitlab_kas['internal_api_listen_network'] = 'tcp'
| |
| − | # gitlab_kas['internal_api_listen_address'] = 'localhost:8153'
| |
| − | | |
| − | ##! Metrics configuration for GitLab KAS
| |
| − | # gitlab_kas['metrics_usage_reporting_period'] = 60
| |
| − | | |
| − | ##! Directories for GitLab KAS
| |
| − | # gitlab_kas['dir'] = '/var/opt/gitlab/gitlab-kas'
| |
| − | # gitlab_kas['log_directory'] = '/var/log/gitlab/gitlab-kas'
| |
| − | # gitlab_kas['env_directory'] = '/opt/gitlab/etc/gitlab-kas/env'
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Mattermost
| |
| − | ##! Docs: https://docs.gitlab.com/omnibus/gitlab-mattermost
| |
| − | ################################################################################
| |
| − | | |
| − | # mattermost_external_url 'http://mattermost.example.com'
| |
| − | | |
| − | # mattermost['enable'] = false
| |
| − | # mattermost['username'] = 'mattermost'
| |
| − | # mattermost['group'] = 'mattermost'
| |
| − | # mattermost['uid'] = nil
| |
| − | # mattermost['gid'] = nil
| |
| − | # mattermost['home'] = '/var/opt/gitlab/mattermost'
| |
| − | # mattermost['database_name'] = 'mattermost_production'
| |
| − | # mattermost['env'] = {
| |
| − | # 'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
| |
| − | # }
| |
| − | # mattermost['service_address'] = "127.0.0.1"
| |
| − | # mattermost['service_port'] = "8065"
| |
| − | # mattermost['service_site_url'] = nil
| |
| − | # mattermost['service_allowed_untrusted_internal_connections'] = ""
| |
| − | # mattermost['service_enable_api_team_deletion'] = true
| |
| − | # mattermost['team_site_name'] = "GitLab Mattermost"
| |
| − | # mattermost['sql_driver_name'] = 'mysql'
| |
| − | # mattermost['sql_data_source'] = "mmuser:mostest@tcp(dockerhost:3306)/mattermost_test?charset=utf8mb4,utf8"
| |
| − | # mattermost['log_file_directory'] = '/var/log/gitlab/mattermost/'
| |
| − | # mattermost['gitlab_enable'] = false
| |
| − | # mattermost['gitlab_id'] = "12345656"
| |
| − | # mattermost['gitlab_secret'] = "123456789"
| |
| − | # mattermost['gitlab_scope'] = ""
| |
| − | # mattermost['gitlab_auth_endpoint'] = "http://gitlab.example.com/oauth/authorize"
| |
| − | # mattermost['gitlab_token_endpoint'] = "http://gitlab.example.com/oauth/token"
| |
| − | # mattermost['gitlab_user_api_endpoint'] = "http://gitlab.example.com/api/v4/user"
| |
| − | # mattermost['file_directory'] = "/var/opt/gitlab/mattermost/data"
| |
| − | # mattermost['plugin_directory'] = "/var/opt/gitlab/mattermost/plugins"
| |
| − | # mattermost['plugin_client_directory'] = "/var/opt/gitlab/mattermost/client-plugins"
| |
| − | | |
| − | ################################################################################
| |
| − | ## Mattermost NGINX
| |
| − | ################################################################################
| |
| − | | |
| − | # All the settings defined in the "GitLab Nginx" section are also available in
| |
| − | # this "Mattermost NGINX" section, using the key `mattermost_nginx`. However,
| |
| − | # those settings should be explicitly set. That is, settings given as
| |
| − | # `nginx['some_setting']` WILL NOT be automatically replicated as
| |
| − | # `mattermost_nginx['some_setting']` and should be set separately.
| |
| − | | |
| − | # Below you can find settings that are exclusive to "Mattermost NGINX"
| |
| − | # mattermost_nginx['enable'] = false
| |
| − | | |
| − | # mattermost_nginx['custom_gitlab_mattermost_server_config'] = "location ^~ /foo-namespace/bar-project/raw/ {\n deny all;\n}\n"
| |
| − | # mattermost_nginx['proxy_set_headers'] = {
| |
| − | # "Host" => "$http_host",
| |
| − | # "X-Real-IP" => "$remote_addr",
| |
| − | # "X-Forwarded-For" => "$proxy_add_x_forwarded_for",
| |
| − | # "X-Frame-Options" => "SAMEORIGIN",
| |
| − | # "X-Forwarded-Proto" => "https",
| |
| − | # "X-Forwarded-Ssl" => "on",
| |
| − | # "Upgrade" => "$http_upgrade",
| |
| − | # "Connection" => "$connection_upgrade"
| |
| − | # }
| |
| − | | |
| − | | |
| − | ################################################################################
| |
| − | ## Registry NGINX
| |
| − | ################################################################################
| |
| − | | |
| − | # All the settings defined in the "GitLab Nginx" section are also available in
| |
| − | # this "Registry NGINX" section, using the key `registry_nginx`. However, those
| |
| − | # settings should be explicitly set. That is, settings given as
| |
| − | # `nginx['some_setting']` WILL NOT be automatically replicated as
| |
| − | # `registry_nginx['some_setting']` and should be set separately.
| |
| − | | |
| − | # Below you can find settings that are exclusive to "Registry NGINX"
| |
| − | # registry_nginx['enable'] = false
| |
| − | | |
| − | # registry_nginx['proxy_set_headers'] = {
| |
| − | # "Host" => "$http_host",
| |
| − | # "X-Real-IP" => "$remote_addr",
| |
| − | # "X-Forwarded-For" => "$proxy_add_x_forwarded_for",
| |
| − | # "X-Forwarded-Proto" => "https",
| |
| − | # "X-Forwarded-Ssl" => "on"
| |
| − | # }
| |
| − | | |
| − | # When the registry is automatically enabled using the same domain as `external_url`,
| |
| − | # it listens on this port
| |
| − | # registry_nginx['listen_port'] = 5050
| |
| − | | |
| − | ################################################################################
| |
| − | ## Prometheus
| |
| − | ##! Docs: https://docs.gitlab.com/ee/administration/monitoring/prometheus/
| |
| − | ################################################################################
| |
| − | | |
| − | ###! **To enable only Monitoring service in this machine, uncomment
| |
| − | ###! the line below.**
| |
| − | ###! Docs: https://docs.gitlab.com/ee/administration/high_availability
| |
| − | # monitoring_role['enable'] = true
| |
| − | | |
| − | # prometheus['enable'] = true
| |
| − | # prometheus['monitor_kubernetes'] = true
| |
| − | # prometheus['username'] = 'gitlab-prometheus'
| |
| − | # prometheus['group'] = 'gitlab-prometheus'
| |
| − | # prometheus['uid'] = nil
| |
| − | # prometheus['gid'] = nil
| |
| − | # prometheus['shell'] = '/bin/sh'
| |
| − | # prometheus['home'] = '/var/opt/gitlab/prometheus'
| |
| − | # prometheus['log_directory'] = '/var/log/gitlab/prometheus'
| |
| − | # prometheus['rules_files'] = ['/var/opt/gitlab/prometheus/rules/*.rules']
| |
| − | # prometheus['scrape_interval'] = 15
| |
| − | # prometheus['scrape_timeout'] = 15
| |
| − | # prometheus['external_labels'] = { }
| |
| − | # prometheus['env_directory'] = '/opt/gitlab/etc/prometheus/env'
| |
| − | # prometheus['env'] = {
| |
| − | # 'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
| |
| − | # }
| |
| − | #
| |
| − | ### Custom scrape configs
| |
| − | #
| |
| − | # Prometheus can scrape additional jobs via scrape_configs. The default automatically
| |
| − | # includes all of the exporters supported by the omnibus config.
| |
| − | #
| |
| − | # See: https://prometheus.io/docs/operating/configuration/#<scrape_config>
| |
| − | #
| |
| − | # Example:
| |
| − | #
| |
| − | # prometheus['scrape_configs'] = [
| |
| − | # {
| |
| − | # 'job_name': 'example',
| |
| − | # 'static_configs' => [
| |
| − | # 'targets' => ['hostname:port'],
| |
| − | # ],
| |
| − | # },
| |
| − | # ]
| |
| − | #
| |
| − | ### Custom alertmanager config
| |
| − | #
| |
| − | # To configure external alertmanagers, create an alertmanager config.
| |
| − | #
| |
| − | # See: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#alertmanager_config
| |
| − | #
| |
| − | # prometheus['alertmanagers'] = [
| |
| − | # {
| |
| − | # 'static_configs' => [
| |
| − | # {
| |
| − | # 'targets' => [
| |
| − | # 'hostname:port'
| |
| − | # ]
| |
| − | # }
| |
| − | # ]
| |
| − | # }
| |
| − | # ]
| |
| − | #
| |
| − | ### Custom Prometheus flags
| |
| − | #
| |
| − | # prometheus['flags'] = {
| |
| − | # 'storage.tsdb.path' => "/var/opt/gitlab/prometheus/data",
| |
| − | # 'storage.tsdb.retention.time' => "15d",
| |
| − | # 'config.file' => "/var/opt/gitlab/prometheus/prometheus.yml"
| |
| − | # }
| |
| − | | |
| − | ##! Advanced settings. Should be changed only if absolutely needed.
| |
| − | # prometheus['listen_address'] = 'localhost:9090'
| |
| − | #
| |
| − | | |
| − | ################################################################################
| |
| − | ###! **Only needed if Prometheus and Rails are not on the same server.**
| |
| − | ### For example, in a multi-node architecture, Prometheus will be installed on the monitoring node, while Rails will be on the Rails node.
| |
| − | ### https://docs.gitlab.com/ee/administration/monitoring/prometheus/index.html#using-an-external-prometheus-server
| |
| − | ### This value should be the address at which Prometheus is available to GitLab Rails(Puma/Unicorn, Sidekiq) node.
| |
| − | ################################################################################
| |
| − | # gitlab_rails['prometheus_address'] = 'your.prom:9090'
| |
| − | | |
| − | ################################################################################
| |
| − | ## Prometheus Alertmanager
| |
| − | ################################################################################
| |
| − | | |
| − | # alertmanager['enable'] = true
| |
| − | # alertmanager['home'] = '/var/opt/gitlab/alertmanager'
| |
| − | # alertmanager['log_directory'] = '/var/log/gitlab/alertmanager'
| |
| − | | |
| − | # alertmanager['flags'] = {
| |
| − | # 'web.listen-address' => "localhost:9093",
| |
| − | # 'storage.path' => "/var/opt/gitlab/alertmanager/data",
| |
| − | # 'config.file' => "/var/opt/gitlab/alertmanager/alertmanager.yml"
| |
| − | # }
| |
| − | # alertmanager['env_directory'] = '/opt/gitlab/etc/alertmanager/env'
| |
| − | # alertmanager['env'] = {
| |
| − | # 'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
| |
| − | # }
| |
| − | | |
| − | ##! Advanced settings. Should be changed only if absolutely needed.
| |
| − | # alertmanager['listen_address'] = 'localhost:9093'
| |
| − | # alertmanager['global'] = {}
| |
| − | | |
| − | ################################################################################
| |
| − | ## Prometheus Node Exporter
| |
| − | ##! Docs: https://docs.gitlab.com/ee/administration/monitoring/prometheus/node_exporter.html
| |
| − | ################################################################################
| |
| − | | |
| − | # node_exporter['enable'] = true
| |
| − | # node_exporter['home'] = '/var/opt/gitlab/node-exporter'
| |
| − | # node_exporter['log_directory'] = '/var/log/gitlab/node-exporter'
| |
| − | # node_exporter['flags'] = {
| |
| − | # 'collector.textfile.directory' => "/var/opt/gitlab/node-exporter/textfile_collector"
| |
| − | # }
| |
| − | # node_exporter['env_directory'] = '/opt/gitlab/etc/node-exporter/env'
| |
| − | # node_exporter['env'] = {
| |
| − | # 'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
| |
| − | # }
| |
| − | | |
| − | ##! Advanced settings. Should be changed only if absolutely needed.
| |
| − | # node_exporter['listen_address'] = 'localhost:9100'
| |
| − | | |
| − | ################################################################################
| |
| − | ## Prometheus Redis exporter
| |
| − | ##! Docs: https://docs.gitlab.com/ee/administration/monitoring/prometheus/redis_exporter.html
| |
| − | ################################################################################
| |
| − | | |
| − | # redis_exporter['enable'] = true
| |
| − | # redis_exporter['log_directory'] = '/var/log/gitlab/redis-exporter'
| |
| − | # redis_exporter['flags'] = {
| |
| − | # 'redis.addr' => "unix:///var/opt/gitlab/redis/redis.socket",
| |
| − | # }
| |
| − | # redis_exporter['env_directory'] = '/opt/gitlab/etc/redis-exporter/env'
| |
| − | # redis_exporter['env'] = {
| |
| − | # 'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
| |
| − | # }
| |
| − | | |
| − | ##! Advanced settings. Should be changed only if absolutely needed.
| |
| − | # redis_exporter['listen_address'] = 'localhost:9121'
| |
| − | | |
| − | ################################################################################
| |
| − | ## Prometheus Postgres exporter
| |
| − | ##! Docs: https://docs.gitlab.com/ee/administration/monitoring/prometheus/postgres_exporter.html
| |
| − | ################################################################################
| |
| − | | |
| − | # postgres_exporter['enable'] = true
| |
| − | # postgres_exporter['home'] = '/var/opt/gitlab/postgres-exporter'
| |
| − | # postgres_exporter['log_directory'] = '/var/log/gitlab/postgres-exporter'
| |
| − | # postgres_exporter['flags'] = {}
| |
| − | # postgres_exporter['listen_address'] = 'localhost:9187'
| |
| − | # postgres_exporter['env_directory'] = '/opt/gitlab/etc/postgres-exporter/env'
| |
| − | # postgres_exporter['env'] = {
| |
| − | # 'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
| |
| − | # }
| |
| − | # postgres_exporter['sslmode'] = nil
| |
| − | # postgres_exporter['per_table_stats'] = false
| |
| − | | |
| − | ################################################################################
| |
| − | ## Prometheus PgBouncer exporter (EE only)
| |
| − | ##! Docs: https://docs.gitlab.com/ee/administration/monitoring/prometheus/pgbouncer_exporter.html
| |
| − | ################################################################################
| |
| − | | |
| − | # pgbouncer_exporter['enable'] = false
| |
| − | # pgbouncer_exporter['log_directory'] = "/var/log/gitlab/pgbouncer-exporter"
| |
| − | # pgbouncer_exporter['listen_address'] = 'localhost:9188'
| |
| − | # pgbouncer_exporter['env_directory'] = '/opt/gitlab/etc/pgbouncer-exporter/env'
| |
| − | # pgbouncer_exporter['env'] = {
| |
| − | # 'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
| |
| − | # }
| |
| − | | |
| − | ################################################################################
| |
| − | ## Prometheus Gitlab exporter
| |
| − | ##! Docs: https://docs.gitlab.com/ee/administration/monitoring/prometheus/gitlab_exporter.html
| |
| − | ################################################################################
| |
| − | | |
| − | | |
| − | # gitlab_exporter['enable'] = true
| |
| − | # gitlab_exporter['log_directory'] = "/var/log/gitlab/gitlab-exporter"
| |
| − | # gitlab_exporter['home'] = "/var/opt/gitlab/gitlab-exporter"
| |
| − | | |
| − | ##! Advanced settings. Should be changed only if absolutely needed.
| |
| − | # gitlab_exporter['server_name'] = 'webrick'
| |
| − | # gitlab_exporter['listen_address'] = 'localhost'
| |
| − | # gitlab_exporter['listen_port'] = '9168'
| |
| − | | |
| − | ##! Manage gitlab-exporter sidekiq probes. false by default when Sentinels are
| |
| − | ##! found.
| |
| − | # gitlab_exporter['probe_sidekiq'] = true
| |
| − | | |
| − | # To completely disable prometheus, and all of it's exporters, set to false
| |
| − | # prometheus_monitoring['enable'] = true
| |
| − | | |
| − | ################################################################################
| |
| − | ## Grafana Dashboards
| |
| − | ##! Docs: https://docs.gitlab.com/ee/administration/monitoring/prometheus/#prometheus-as-a-grafana-data-source
| |
| − | ################################################################################
| |
| − | | |
| − | # grafana['enable'] = true
| |
| − | # grafana['log_directory'] = '/var/log/gitlab/grafana'
| |
| − | # grafana['home'] = '/var/opt/gitlab/grafana'
| |
| − | # grafana['admin_password'] = 'admin'
| |
| − | # grafana['allow_user_sign_up'] = false
| |
| − | # grafana['basic_auth_enabled'] = false
| |
| − | # grafana['disable_login_form'] = true
| |
| − | # grafana['gitlab_application_id'] = 'GITLAB_APPLICATION_ID'
| |
| − | # grafana['gitlab_secret'] = 'GITLAB_SECRET'
| |
| − | # grafana['env_directory'] = '/opt/gitlab/etc/grafana/env'
| |
| − | # grafana['allowed_groups'] = []
| |
| − | # grafana['gitlab_auth_sign_up'] = true
| |
| − | # grafana['env'] = {
| |
| − | # 'SSL_CERT_DIR' => "#{node['package']['install-dir']}/embedded/ssl/certs/"
| |
| − | # }
| |
| − | # grafana['metrics_enabled'] = false
| |
| − | # grafana['metrics_basic_auth_username'] = 'grafana_metrics' # default: nil
| |
| − | # grafana['metrics_basic_auth_password'] = 'please_set_a_unique_password' # default: nil
| |
| − | # grafana['alerting_enabled'] = false
| |
| − | | |
| − | ### SMTP Configuration
| |
| − | #
| |
| − | # See: http://docs.grafana.org/administration/configuration/#smtp
| |
| − | #
| |
| − | # grafana['smtp'] = {
| |
| − | # 'enabled' => true,
| |
| − | # 'host' => 'localhost:25',
| |
| − | # 'user' => nil,
| |
| − | # 'password' => nil,
| |
| − | # 'cert_file' => nil,
| |
| − | # 'key_file' => nil,
| |
| − | # 'skip_verify' => false,
| |
| − | | |
| − | # 'from_name' => 'Grafana',
| |
| − | # 'ehlo_identity' => 'dashboard.example.com',
| |
| − | # 'startTLS_policy' => nil
| |
| − | # }
| |
| − | | |
| − | # Grafana usage reporting defaults to gitlab_rails['usage_ping_enabled']
| |
| − | # grafana['reporting_enabled'] = true
| |
| − | | |
| − | ### Dashboards
| |
| − | #
| |
| − | # See: http://docs.grafana.org/administration/provisioning/#dashboards
| |
| − | #
| |
| − | # NOTE: Setting this will override the default.
| |
| − | #
| |
| − | # grafana['dashboards'] = [
| |
| − | # {
| |
| − | # 'name' => 'GitLab Omnibus',
| |
| − | # 'orgId' => 1,
| |
| − | # 'folder' => 'GitLab Omnibus',
| |
| − | # 'type' => 'file',
| |
| − | # 'disableDeletion' => true,
| |
| − | # 'updateIntervalSeconds' => 600,
| |
| − | # 'options' => {
| |
| − | # 'path' => '/opt/gitlab/embedded/service/grafana-dashboards',
| |
| − | # }
| |
| − | # }
| |
| − | # ]
| |
| − | | |
| − | ### Datasources
| |
| − | #
| |
| − | # See: http://docs.grafana.org/administration/provisioning/#example-datasource-config-file
| |
| − | #
| |
| − | # NOTE: Setting this will override the default.
| |
| − | #
| |
| − | # grafana['datasources'] = [
| |
| − | # {
| |
| − | # 'name' => 'GitLab Omnibus',
| |
| − | # 'type' => 'prometheus',
| |
| − | # 'access' => 'proxy',
| |
| − | # 'url' => 'http://localhost:9090'
| |
| − | # }
| |
| − | # ]
| |
| − | | |
| − | ##! Advanced settings. Should be changed only if absolutely needed.
| |
| − | # grafana['http_addr'] = 'localhost'
| |
| − | # grafana['http_port'] = 3000
| |
| − | | |
| − | ################################################################################
| |
| − | ## Gitaly
| |
| − | ##! Docs:
| |
| − | ################################################################################
| |
| − | | |
| − | # The gitaly['enable'] option exists for the purpose of cluster
| |
| − | # deployments, see https://docs.gitlab.com/ee/administration/gitaly/index.html .
| |
| − | # gitaly['enable'] = true
| |
| − | # gitaly['dir'] = "/var/opt/gitlab/gitaly"
| |
| − | # gitaly['log_directory'] = "/var/log/gitlab/gitaly"
| |
| − | # gitaly['bin_path'] = "/opt/gitlab/embedded/bin/gitaly"
| |
| − | # gitaly['env_directory'] = "/opt/gitlab/etc/gitaly/env"
| |
| − | # gitaly['env'] = {
| |
| − | # 'PATH' => "/opt/gitlab/bin:/opt/gitlab/embedded/bin:/bin:/usr/bin",
| |
| − | # 'HOME' => '/var/opt/gitlab',
| |
| − | # 'TZ' => ':/etc/localtime',
| |
| − | # 'PYTHONPATH' => "/opt/gitlab/embedded/lib/python3.7/site-packages",
| |
| − | # 'ICU_DATA' => "/opt/gitlab/embedded/share/icu/current",
| |
| − | # 'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/",
| |
| − | # 'WRAPPER_JSON_LOGGING' => true
| |
| − | # }
| |
| − | | |
| − | ##! internal_socket_dir is the directory that will contain internal gitaly sockets,
| |
| − | ##! separate from socket_path which is the socket that external clients listen on
| |
| − | | |
| − | # gitaly['internal_socket_dir'] = "/var/opt/gitlab/gitaly"
| |
| − | # gitaly['socket_path'] = "/var/opt/gitlab/gitaly/gitaly.socket"
| |
| − | # gitaly['listen_addr'] = "localhost:8075"
| |
| − | # gitaly['tls_listen_addr'] = "localhost:9075"
| |
| − | # gitaly['certificate_path'] = "/var/opt/gitlab/gitaly/certificate.pem"
| |
| − | # gitaly['key_path'] = "/var/opt/gitlab/gitaly/key.pem"
| |
| − | # gitaly['prometheus_listen_addr'] = "localhost:9236"
| |
| − | # gitaly['logging_level'] = "warn"
| |
| − | # gitaly['logging_format'] = "json"
| |
| − | # gitaly['logging_sentry_dsn'] = "https://<key>:<secret>@sentry.io/<project>"
| |
| − | # gitaly['logging_ruby_sentry_dsn'] = "https://<key>:<secret>@sentry.io/<project>"
| |
| − | # gitaly['logging_sentry_environment'] = "production"
| |
| − | # gitaly['prometheus_grpc_latency_buckets'] = "[0.001, 0.005, 0.025, 0.1, 0.5, 1.0, 10.0, 30.0, 60.0, 300.0, 1500.0]"
| |
| − | # gitaly['auth_token'] = '<secret>'
| |
| − | # gitaly['auth_transitioning'] = false # When true, auth is logged to Prometheus but NOT enforced
| |
| − | # gitaly['graceful_restart_timeout'] = '1m' # Grace time for a gitaly process to finish ongoing requests
| |
| − | # gitaly['git_catfile_cache_size'] = 100 # Number of 'git cat-file' processes kept around for re-use
| |
| − | # gitaly['git_bin_path'] = "/opt/gitlab/embedded/bin/git" # A custom path for the 'git' executable
| |
| − | # gitaly['open_files_ulimit'] = 15000 # Maximum number of open files allowed for the gitaly process
| |
| − | # gitaly['ruby_max_rss'] = 300000000 # RSS threshold in bytes for triggering a gitaly-ruby restart
| |
| − | # gitaly['ruby_graceful_restart_timeout'] = '10m' # Grace time for a gitaly-ruby process to finish ongoing requests
| |
| − | # gitaly['ruby_restart_delay'] = '5m' # Period of sustained high RSS that needs to be observed before restarting gitaly-ruby
| |
| − | # gitaly['ruby_rugged_git_config_search_path'] = "/opt/gitlab/embedded/etc" # Location of system-wide gitconfig file
| |
| − | # gitaly['ruby_num_workers'] = 3 # Number of gitaly-ruby worker processes. Minimum 2, default 2.
| |
| − | # gitaly['concurrency'] = [
| |
| − | # {
| |
| − | # 'rpc' => "/gitaly.SmartHTTPService/PostReceivePack",
| |
| − | # 'max_per_repo' => 20
| |
| − | # }, {
| |
| − | # 'rpc' => "/gitaly.SSHService/SSHUploadPack",
| |
| − | # 'max_per_repo' => 5
| |
| − | # }
| |
| − | # ]
| |
| − | #
| |
| − | # gitaly['daily_maintenance_start_hour'] = 22
| |
| − | # gitaly['daily_maintenance_start_minute'] = 30
| |
| − | # gitaly['daily_maintenance_duration'] = '30m'
| |
| − | # gitaly['daily_maintenance_storages'] = ["default"]
| |
| − | # gitaly['cgroups_count'] = 10
| |
| − | # gitaly['cgroups_mountpoint'] = '/sys/fs/cgroup'
| |
| − | # gitaly['cgroups_hierarchy_root'] = 'gitaly'
| |
| − | # gitaly['cgroups_memory_enabled'] = true
| |
| − | # gitaly['cgroups_memory_limit'] = 1048576
| |
| − | # gitaly['cgroups_cpu_enabled'] = true
| |
| − | # gitaly['cgroups_cpu_shares'] = 512
| |
| − | | |
| − | ################################################################################
| |
| − | ## Praefect
| |
| − | ##! Docs: https://gitlab.com/gitlab-org/gitaly/blob/master/doc/design_ha.md
| |
| − | ################################################################################
| |
| − | | |
| − | # praefect['enable'] = false
| |
| − | # praefect['dir'] = "/var/opt/gitlab/praefect"
| |
| − | # praefect['log_directory'] = "/var/log/gitlab/praefect"
| |
| − | # praefect['env_directory'] = "/opt/gitlab/etc/praefect/env"
| |
| − | # praefect['env'] = {
| |
| − | # 'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/",
| |
| − | # 'GITALY_PID_FILE' => "/var/opt/gitlab/praefect/praefect.pid",
| |
| − | # 'WRAPPER_JSON_LOGGING' => true
| |
| − | # }
| |
| − | # praefect['wrapper_path'] = "/opt/gitlab/embedded/bin/gitaly-wrapper"
| |
| − | # praefect['virtual_storage_name'] = "praefect"
| |
| − | # praefect['failover_enabled'] = false
| |
| − | # praefect['failover_election_strategy'] = 'sql'
| |
| − | # praefect['auth_token'] = ""
| |
| − | # praefect['auth_transitioning'] = false
| |
| − | # praefect['listen_addr'] = "localhost:2305"
| |
| − | # praefect['tls_listen_addr'] = "localhost:3305"
| |
| − | # praefect['certificate_path'] = "/var/opt/gitlab/prafect/certificate.pem"
| |
| − | # praefect['key_path'] = "/var/opt/gitlab/prafect/key.pem"
| |
| − | # praefect['prometheus_listen_addr'] = "localhost:9652"
| |
| − | # praefect['prometheus_grpc_latency_buckets'] = "[0.001, 0.005, 0.025, 0.1, 0.5, 1.0, 10.0, 30.0, 60.0, 300.0, 1500.0]"
| |
| − | # praefect['logging_level'] = "warn"
| |
| − | # praefect['logging_format'] = "json"
| |
| − | # praefect['virtual_storages'] = {
| |
| − | # 'default' => {
| |
| − | # 'default_replication_factor' => 3,
| |
| − | # 'nodes' => {
| |
| − | # 'praefect-internal-0' => {
| |
| − | # 'address' => 'tcp://10.23.56.78:8075',
| |
| − | # 'token' => 'abc123'
| |
| − | # },
| |
| − | # 'praefect-internal-1' => {
| |
| − | # 'address' => 'tcp://10.76.23.31:8075',
| |
| − | # 'token' => 'xyz456'
| |
| − | # }
| |
| − | # }
| |
| − | # },
| |
| − | # 'alternative' => {
| |
| − | # 'nodes' => {
| |
| − | # 'praefect-internal-2' => {
| |
| − | # 'address' => 'tcp://10.34.1.16:8075',
| |
| − | # 'token' => 'abc321'
| |
| − | # },
| |
| − | # 'praefect-internal-3' => {
| |
| − | # 'address' => 'tcp://10.23.18.6:8075',
| |
| − | # 'token' => 'xyz890'
| |
| − | # }
| |
| − | # }
| |
| − | # }
| |
| − | # }
| |
| − | # praefect['sentry_dsn'] = "https://<key>:<secret>@sentry.io/<project>"
| |
| − | # praefect['sentry_environment'] = "production"
| |
| − | # praefect['auto_migrate'] = true
| |
| − | # praefect['database_host'] = 'postgres.external'
| |
| − | # praefect['database_port'] = 6432
| |
| − | # praefect['database_user'] = 'praefect'
| |
| − | # praefect['database_password'] = 'secret'
| |
| − | # praefect['database_dbname'] = 'praefect_production'
| |
| − | # praefect['database_sslmode'] = 'disable'
| |
| − | # praefect['database_sslcert'] = '/path/to/client-cert'
| |
| − | # praefect['database_sslkey'] = '/path/to/client-key'
| |
| − | # praefect['database_sslrootcert'] = '/path/to/rootcert'
| |
| − | # praefect['reconciliation_scheduling_interval'] = '5m'
| |
| − | # praefect['reconciliation_histogram_buckets'] = '[0.001, 0.005, 0.025, 0.1, 0.5, 1.0, 10.0]'
| |
| − | # praefect['database_host_no_proxy'] = 'postgres.internal'
| |
| − | # praefect['database_port_no_proxy'] = 5432
| |
| − | | |
| − | ################################################################################
| |
| − | # Storage check
| |
| − | ################################################################################
| |
| − | # storage_check['enable'] = false
| |
| − | # storage_check['target'] = 'unix:///var/opt/gitlab/gitlab-rails/sockets/gitlab.socket'
| |
| − | # storage_check['log_directory'] = '/var/log/gitlab/storage-check'
| |
| − | | |
| − | ################################################################################
| |
| − | # Let's Encrypt integration
| |
| − | ################################################################################
| |
| − | # letsencrypt['enable'] = nil
| |
| − | # letsencrypt['contact_emails'] = [] # This should be an array of email addresses to add as contacts
| |
| − | # letsencrypt['group'] = 'root'
| |
| − | # letsencrypt['key_size'] = 2048
| |
| − | # letsencrypt['owner'] = 'root'
| |
| − | # letsencrypt['wwwroot'] = '/var/opt/gitlab/nginx/www'
| |
| − | # See http://docs.gitlab.com/omnibus/settings/ssl.html#automatic-renewal for more on these sesttings
| |
| − | # letsencrypt['auto_renew'] = true
| |
| − | # letsencrypt['auto_renew_hour'] = 0
| |
| − | # letsencrypt['auto_renew_minute'] = nil # Should be a number or cron expression, if specified.
| |
| − | # letsencrypt['auto_renew_day_of_month'] = "*/4"
| |
| − | # letsencrypt['auto_renew_log_directory'] = '/var/log/gitlab/lets-encrypt'
| |
| − | | |
| − | ##! Turn off automatic init system detection. To skip init detection in
| |
| − | ##! non-docker containers. Recommended not to change.
| |
| − | # package['detect_init'] = true
| |
| − | | |
| − | ##! Attempt to modify kernel paramaters. To skip this in containers where the
| |
| − | ##! relevant file system is read-only, set the value to false.
| |
| − | # package['modify_kernel_parameters'] = true
| |
| − | | |
| − | ##! Specify maximum number of tasks that can be created by the systemd unit
| |
| − | ##! Will be populated as TasksMax value to the unit file if user is on a systemd
| |
| − | ##! version that supports it (>= 227). Will be a no-op if user is not on systemd.
| |
| − | # package['systemd_tasks_max'] = 4915
| |
| − | | |
| − | ##! Settings to configure order of GitLab's systemd unit.
| |
| − | ##! Note: We do not recommend changing these values unless absolutely necessary
| |
| − | # package['systemd_after'] = 'multi-user.target'
| |
| − | # package['systemd_wanted_by'] = 'multi-user.target'
| |
| − | ################################################################################
| |
| − | ################################################################################
| |
| − | ## Configuration Settings for GitLab EE only ##
| |
| − | ################################################################################
| |
| − | ################################################################################
| |
| − | | |
| − | | |
| − | ################################################################################
| |
| − | ## Auxiliary cron jobs applicable to GitLab EE only
| |
| − | ################################################################################
| |
| − | #
| |
| − | # gitlab_rails['geo_file_download_dispatch_worker_cron'] = "*/10 * * * *"
| |
| − | # gitlab_rails['geo_repository_sync_worker_cron'] = "*/5 * * * *"
| |
| − | # gitlab_rails['geo_secondary_registry_consistency_worker'] = "* * * * *"
| |
| − | # gitlab_rails['geo_prune_event_log_worker_cron'] = "*/5 * * * *"
| |
| − | # gitlab_rails['geo_repository_verification_primary_batch_worker_cron'] = "*/5 * * * *"
| |
| − | # gitlab_rails['geo_repository_verification_secondary_scheduler_worker_cron'] = "*/5 * * * *"
| |
| − | # gitlab_rails['ldap_sync_worker_cron'] = "30 1 * * *"
| |
| − | # gitlab_rails['ldap_group_sync_worker_cron'] = "0 * * * *"
| |
| − | # gitlab_rails['historical_data_worker_cron'] = "0 12 * * *"
| |
| − | # gitlab_rails['pseudonymizer_worker_cron'] = "0 23 * * *"
| |
| − | # gitlab_rails['elastic_index_bulk_cron'] = "*/1 * * * *"
| |
| − | # gitlab_rails['analytics_devops_adoption_create_all_snapshots_worker_cron'] = "0 4 * * *"
| |
| − | | |
| − | ################################################################################
| |
| − | ## Kerberos (EE Only)
| |
| − | ##! Docs: https://docs.gitlab.com/ee/integration/kerberos.html#http-git-access
| |
| − | ################################################################################
| |
| − | | |
| − | # gitlab_rails['kerberos_enabled'] = true
| |
| − | # gitlab_rails['kerberos_keytab'] = /etc/http.keytab
| |
| − | | |
| − | # gitlab_rails['kerberos_simple_ldap_linking_allowed_realms'] = ['example.com','kerberos.example.com']
| |
| − | # gitlab_rails['kerberos_use_dedicated_port'] = true
| |
| − | # gitlab_rails['kerberos_port'] = 8443
| |
| − | # gitlab_rails['kerberos_https'] = true
| |
| − | | |
| − | ################################################################################
| |
| − | ## Package repository
| |
| − | ##! Docs: https://docs.gitlab.com/ee/administration/packages/
| |
| − | ################################################################################
| |
| − | | |
| − | # gitlab_rails['packages_enabled'] = true
| |
| − | # gitlab_rails['packages_storage_path'] = "/var/opt/gitlab/gitlab-rails/shared/packages"
| |
| − | # gitlab_rails['packages_object_store_enabled'] = false
| |
| − | # gitlab_rails['packages_object_store_direct_upload'] = false
| |
| − | # gitlab_rails['packages_object_store_background_upload'] = true
| |
| − | # gitlab_rails['packages_object_store_proxy_download'] = false
| |
| − | # gitlab_rails['packages_object_store_remote_directory'] = "packages"
| |
| − | # gitlab_rails['packages_object_store_connection'] = {
| |
| − | # 'provider' => 'AWS',
| |
| − | # 'region' => 'eu-west-1',
| |
| − | # 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
| |
| − | # 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
| |
| − | # # # The below options configure an S3 compatible host instead of AWS
| |
| − | # # 'host' => 's3.amazonaws.com',
| |
| − | # # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
| |
| − | # # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
| |
| − | # # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
| |
| − | # }
| |
| − | | |
| − | ################################################################################
| |
| − | ## Dependency proxy
| |
| − | ##! Docs: https://docs.gitlab.com/ee/administration/packages/dependency_proxy.html
| |
| − | ################################################################################
| |
| − | | |
| − | # gitlab_rails['dependency_proxy_enabled'] = true
| |
| − | # gitlab_rails['dependency_proxy_storage_path'] = "/var/opt/gitlab/gitlab-rails/shared/dependency_proxy"
| |
| − | # gitlab_rails['dependency_proxy_object_store_enabled'] = false
| |
| − | # gitlab_rails['dependency_proxy_object_store_direct_upload'] = false
| |
| − | # gitlab_rails['dependency_proxy_object_store_background_upload'] = true
| |
| − | # gitlab_rails['dependency_proxy_object_store_proxy_download'] = false
| |
| − | # gitlab_rails['dependency_proxy_object_store_remote_directory'] = "dependency_proxy"
| |
| − | # gitlab_rails['dependency_proxy_object_store_connection'] = {
| |
| − | # 'provider' => 'AWS',
| |
| − | # 'region' => 'eu-west-1',
| |
| − | # 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
| |
| − | # 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
| |
| − | # # # The below options configure an S3 compatible host instead of AWS
| |
| − | # # 'host' => 's3.amazonaws.com',
| |
| − | # # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
| |
| − | # # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
| |
| − | # # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
| |
| − | # }
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Sentinel (EE Only)
| |
| − | ##! Docs: http://docs.gitlab.com/ce/administration/high_availability/redis.html#high-availability-with-sentinel
| |
| − | ################################################################################
| |
| − | | |
| − | ##! **Make sure you configured all redis['master_*'] keys above before
| |
| − | ##! continuing.**
| |
| − | | |
| − | ##! To enable Sentinel and disable all other services in this machine,
| |
| − | ##! uncomment the line below (if you've enabled Redis role, it will keep it).
| |
| − | ##! Docs: https://docs.gitlab.com/ee/administration/high_availability/redis.html
| |
| − | # redis_sentinel_role['enable'] = true
| |
| − | | |
| − | # sentinel['enable'] = true
| |
| − | | |
| − | ##! Bind to all interfaces, uncomment to specify an IP and bind to a single one
| |
| − | # sentinel['bind'] = '0.0.0.0'
| |
| − | | |
| − | ##! Uncomment to change default port
| |
| − | # sentinel['port'] = 26379
| |
| − | | |
| − | #### Support to run sentinels in a Docker or NAT environment
| |
| − | #####! Docs: https://redis.io/topics/sentinel#sentinel-docker-nat-and-possible-issues
| |
| − | # In an standard case, Sentinel will run in the same network service as Redis, so the same IP will be announce for Redis and Sentinel
| |
| − | # Only define these values if it is needed to announce for Sentinel a differen IP service than Redis
| |
| − | # sentinel['announce_ip'] = nil # If not defined, its value will be taken from redis['announce_ip'] or nil if not present
| |
| − | # sentinel['announce_port'] = nil # If not defined, its value will be taken from sentinel['port'] or nil if redis['announce_ip'] not present
| |
| − | | |
| − | ##! Quorum must reflect the amount of voting sentinels it take to start a
| |
| − | ##! failover.
| |
| − | ##! **Value must NOT be greater then the amount of sentinels.**
| |
| − | ##! The quorum can be used to tune Sentinel in two ways:
| |
| − | ##! 1. If a the quorum is set to a value smaller than the majority of Sentinels
| |
| − | ##! we deploy, we are basically making Sentinel more sensible to master
| |
| − | ##! failures, triggering a failover as soon as even just a minority of
| |
| − | ##! Sentinels is no longer able to talk with the master.
| |
| − | ##! 2. If a quorum is set to a value greater than the majority of Sentinels, we
| |
| − | ##! are making Sentinel able to failover only when there are a very large
| |
| − | ##! number (larger than majority) of well connected Sentinels which agree
| |
| − | ##! about the master being down.
| |
| − | # sentinel['quorum'] = 1
| |
| − | | |
| − | ### Consider unresponsive server down after x amount of ms.
| |
| − | # sentinel['down_after_milliseconds'] = 10000
| |
| − | | |
| − | ### Specifies the failover timeout in milliseconds.
| |
| − | ##! It is used in many ways:
| |
| − | ##!
| |
| − | ##! - The time needed to re-start a failover after a previous failover was
| |
| − | ##! already tried against the same master by a given Sentinel, is two
| |
| − | ##! times the failover timeout.
| |
| − | ##!
| |
| − | ##! - The time needed for a replica replicating to a wrong master according
| |
| − | ##! to a Sentinel current configuration, to be forced to replicate
| |
| − | ##! with the right master, is exactly the failover timeout (counting since
| |
| − | ##! the moment a Sentinel detected the misconfiguration).
| |
| − | ##!
| |
| − | ##! - The time needed to cancel a failover that is already in progress but
| |
| − | ##! did not produced any configuration change (REPLICAOF NO ONE yet not
| |
| − | ##! acknowledged by the promoted replica).
| |
| − | ##!
| |
| − | ##! - The maximum time a failover in progress waits for all the replicas to be
| |
| − | ##! reconfigured as replicas of the new master. However even after this time
| |
| − | ##! the replicas will be reconfigured by the Sentinels anyway, but not with
| |
| − | ##! the exact parallel-syncs progression as specified.
| |
| − | # sentinel['failover_timeout'] = 60000
| |
| − | | |
| − | ################################################################################
| |
| − | ## Additional Database Settings (EE only)
| |
| − | ##! Docs: https://docs.gitlab.com/ee/administration/database_load_balancing.html
| |
| − | ################################################################################
| |
| − | # gitlab_rails['db_load_balancing'] = { 'hosts' => ['secondary1.example.com'] }
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Geo
| |
| − | ##! Docs: https://docs.gitlab.com/ee/gitlab-geo
| |
| − | ################################################################################
| |
| − | ##! Geo roles 'geo_primary_role' and 'geo_secondary_role' are set above with
| |
| − | ##! other roles. For more information, see: https://docs.gitlab.com/omnibus/roles/README.html#roles.
| |
| − | | |
| − | # This is an optional identifier which Geo nodes can use to identify themselves.
| |
| − | # For example, if external_url is the same for two secondaries, you must specify
| |
| − | # a unique Geo node name for those secondaries.
| |
| − | #
| |
| − | # If it is blank, it defaults to external_url.
| |
| − | # gitlab_rails['geo_node_name'] = nil
| |
| − | | |
| − | # gitlab_rails['geo_registry_replication_enabled'] = true
| |
| − | # gitlab_rails['geo_registry_replication_primary_api_url'] = 'https://example.com:5050'
| |
| − | | |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Geo Secondary (EE only)
| |
| − | ################################################################################
| |
| − | # geo_secondary['auto_migrate'] = true
| |
| − | # geo_secondary['db_adapter'] = "postgresql"
| |
| − | # geo_secondary['db_encoding'] = "unicode"
| |
| − | # geo_secondary['db_collation'] = nil
| |
| − | # geo_secondary['db_database'] = "gitlabhq_geo_production"
| |
| − | # geo_secondary['db_username'] = "gitlab_geo"
| |
| − | # geo_secondary['db_password'] = nil
| |
| − | # geo_secondary['db_host'] = "/var/opt/gitlab/geo-postgresql"
| |
| − | # geo_secondary['db_port'] = 5431
| |
| − | # geo_secondary['db_socket'] = nil
| |
| − | # geo_secondary['db_sslmode'] = nil
| |
| − | # geo_secondary['db_sslcompression'] = 0
| |
| − | # geo_secondary['db_sslrootcert'] = nil
| |
| − | # geo_secondary['db_sslca'] = nil
| |
| − | | |
| − | ################################################################################
| |
| − | ## GitLab Geo Secondary Tracking Database (EE only)
| |
| − | ################################################################################
| |
| − | | |
| − | # geo_postgresql['enable'] = false
| |
| − | # geo_postgresql['ha'] = false
| |
| − | # geo_postgresql['dir'] = '/var/opt/gitlab/geo-postgresql'
| |
| − | # geo_postgresql['data_dir'] = '/var/opt/gitlab/geo-postgresql/data'
| |
| − | # geo_postgresql['pgbouncer_user'] = nil
| |
| − | # geo_postgresql['pgbouncer_user_password'] = nil
| |
| − | ##! `SQL_USER_PASSWORD_HASH` can be generated using the command `gitlab-ctl pg-password-md5 gitlab`
| |
| − | # geo_postgresql['sql_user_password'] = 'SQL_USER_PASSWORD_HASH'
| |
| − | | |
| − | ################################################################################
| |
| − | ## Unleash
| |
| − | ##! These settings are for GitLab internal use.
| |
| − | ##! They are used to control feature flags during GitLab development.
| |
| − | ##! Docs: https://docs.gitlab.com/ee/development/feature_flags
| |
| − | ################################################################################
| |
| − | # gitlab_rails['feature_flags_unleash_enabled'] = false
| |
| − | # gitlab_rails['feature_flags_unleash_url'] = nil
| |
| − | # gitlab_rails['feature_flags_unleash_app_name'] = nil
| |
| − | # gitlab_rails['feature_flags_unleash_instance_id'] = nil
| |
| − | | |
| − | ################################################################################
| |
| − | # Pgbouncer (EE only)
| |
| − | # See [GitLab PgBouncer documentation](http://docs.gitlab.com/omnibus/settings/database.html#enabling-pgbouncer-ee-only)
| |
| − | # See the [PgBouncer page](https://pgbouncer.github.io/config.html) for details
| |
| − | ################################################################################
| |
| − | # pgbouncer['enable'] = false
| |
| − | # pgbouncer['log_directory'] = '/var/log/gitlab/pgbouncer'
| |
| − | # pgbouncer['data_directory'] = '/var/opt/gitlab/pgbouncer'
| |
| − | # pgbouncer['env_directory'] = '/opt/gitlab/etc/pgbouncer/env'
| |
| − | # pgbouncer['env'] = {
| |
| − | # 'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
| |
| − | # }
| |
| − | # pgbouncer['listen_addr'] = '0.0.0.0'
| |
| − | # pgbouncer['listen_port'] = '6432'
| |
| − | # pgbouncer['pool_mode'] = 'transaction'
| |
| − | # pgbouncer['server_reset_query'] = 'DISCARD ALL'
| |
| − | # pgbouncer['application_name_add_host'] = '1'
| |
| − | # pgbouncer['max_client_conn'] = '2048'
| |
| − | # pgbouncer['default_pool_size'] = '100'
| |
| − | # pgbouncer['min_pool_size'] = '0'
| |
| − | # pgbouncer['reserve_pool_size'] = '5'
| |
| − | # pgbouncer['reserve_pool_timeout'] = '5.0'
| |
| − | # pgbouncer['server_round_robin'] = '0'
| |
| − | # pgbouncer['log_connections'] = '0'
| |
| − | # pgbouncer['server_idle_timeout'] = '30'
| |
| − | # pgbouncer['dns_max_ttl'] = '15.0'
| |
| − | # pgbouncer['dns_zone_check_period'] = '0'
| |
| − | # pgbouncer['dns_nxdomain_ttl'] = '15.0'
| |
| − | # pgbouncer['admin_users'] = %w(gitlab-psql postgres pgbouncer)
| |
| − | # pgbouncer['stats_users'] = %w(gitlab-psql postgres pgbouncer)
| |
| − | # pgbouncer['ignore_startup_parameters'] = 'extra_float_digits'
| |
| − | # pgbouncer['databases'] = {
| |
| − | # DATABASE_NAME: {
| |
| − | # host: HOSTNAME,
| |
| − | # port: PORT
| |
| − | # user: USERNAME,
| |
| − | # password: PASSWORD
| |
| − | ###! generate this with `echo -n '$password + $username' | md5sum`
| |
| − | # }
| |
| − | # ...
| |
| − | # }
| |
| − | # pgbouncer['logfile'] = nil
| |
| − | # pgbouncer['unix_socket_dir'] = nil
| |
| − | # pgbouncer['unix_socket_mode'] = '0777'
| |
| − | # pgbouncer['unix_socket_group'] = nil
| |
| − | # pgbouncer['auth_type'] = 'md5'
| |
| − | # pgbouncer['auth_hba_file'] = nil
| |
| − | # pgbouncer['auth_query'] = 'SELECT username, password FROM public.pg_shadow_lookup($1)'
| |
| − | # pgbouncer['users'] = {
| |
| − | # {
| |
| − | # name: USERNAME,
| |
| − | # password: MD5_PASSWORD_HASH
| |
| − | # }
| |
| − | # }
| |
| − | # postgresql['pgbouncer_user'] = nil
| |
| − | # postgresql['pgbouncer_user_password'] = nil
| |
| − | # pgbouncer['server_reset_query_always'] = 0
| |
| − | # pgbouncer['server_check_query'] = 'select 1'
| |
| − | # pgbouncer['server_check_delay'] = 30
| |
| − | # pgbouncer['max_db_connections'] = nil
| |
| − | # pgbouncer['max_user_connections'] = nil
| |
| − | # pgbouncer['syslog'] = 0
| |
| − | # pgbouncer['syslog_facility'] = 'daemon'
| |
| − | # pgbouncer['syslog_ident'] = 'pgbouncer'
| |
| − | # pgbouncer['log_disconnections'] = 1
| |
| − | # pgbouncer['log_pooler_errors'] = 1
| |
| − | # pgbouncer['stats_period'] = 60
| |
| − | # pgbouncer['verbose'] = 0
| |
| − | # pgbouncer['server_lifetime'] = 3600
| |
| − | # pgbouncer['server_connect_timeout'] = 15
| |
| − | # pgbouncer['server_login_retry'] = 15
| |
| − | # pgbouncer['query_timeout'] = 0
| |
| − | # pgbouncer['query_wait_timeout'] = 120
| |
| − | # pgbouncer['client_idle_timeout'] = 0
| |
| − | # pgbouncer['client_login_timeout'] = 60
| |
| − | # pgbouncer['autodb_idle_timeout'] = 3600
| |
| − | # pgbouncer['suspend_timeout'] = 10
| |
| − | # pgbouncer['idle_transaction_timeout'] = 0
| |
| − | # pgbouncer['pkt_buf'] = 4096
| |
| − | # pgbouncer['listen_backlog'] = 128
| |
| − | # pgbouncer['sbuf_loopcnt'] = 5
| |
| − | # pgbouncer['max_packet_size'] = 2147483647
| |
| − | # pgbouncer['tcp_defer_accept'] = 0
| |
| − | # pgbouncer['tcp_socket_buffer'] = 0
| |
| − | # pgbouncer['tcp_keepalive'] = 1
| |
| − | # pgbouncer['tcp_keepcnt'] = 0
| |
| − | # pgbouncer['tcp_keepidle'] = 0
| |
| − | # pgbouncer['tcp_keepintvl'] = 0
| |
| − | # pgbouncer['disable_pqexec'] = 0
| |
| − | | |
| − | ## Pgbouncer client TLS options
| |
| − | # pgbouncer['client_tls_sslmode'] = 'disable'
| |
| − | # pgbouncer['client_tls_ca_file'] = nil
| |
| − | # pgbouncer['client_tls_key_file'] = nil
| |
| − | # pgbouncer['client_tls_cert_file'] = nil
| |
| − | # pgbouncer['client_tls_protocols'] = 'all'
| |
| − | # pgbouncer['client_tls_dheparams'] = 'auto'
| |
| − | # pgbouncer['client_tls_ecdhcurve'] = 'auto'
| |
| − | #
| |
| − | ## Pgbouncer server TLS options
| |
| − | # pgbouncer['server_tls_sslmode'] = 'disable'
| |
| − | # pgbouncer['server_tls_ca_file'] = nil
| |
| − | # pgbouncer['server_tls_key_file'] = nil
| |
| − | # pgbouncer['server_tls_cert_file'] = nil
| |
| − | # pgbouncer['server_tls_protocols'] = 'all'
| |
| − | # pgbouncer['server_tls_ciphers'] = 'fast'
| |
| − | | |
| − | ################################################################################
| |
| − | # Repmgr (EE only)
| |
| − | ################################################################################
| |
| − | # repmgr['enable'] = false
| |
| − | # repmgr['cluster'] = 'gitlab_cluster'
| |
| − | # repmgr['database'] = 'gitlab_repmgr'
| |
| − | # repmgr['host'] = nil
| |
| − | # repmgr['node_number'] = nil
| |
| − | # repmgr['port'] = 5432
| |
| − | # repmgr['trust_auth_cidr_addresses'] = []
| |
| − | # repmgr['username'] = 'gitlab_repmgr'
| |
| − | # repmgr['sslmode'] = 'prefer'
| |
| − | # repmgr['sslcompression'] = 0
| |
| − | # repmgr['failover'] = 'automatic'
| |
| − | # repmgr['log_directory'] = '/var/log/gitlab/repmgrd'
| |
| − | # repmgr['node_name'] = nil
| |
| − | # repmgr['pg_bindir'] = '/opt/gitlab/embedded/bin'
| |
| − | # repmgr['service_start_command'] = '/opt/gitlab/bin/gitlab-ctl start postgresql'
| |
| − | # repmgr['service_stop_command'] = '/opt/gitlab/bin/gitlab-ctl stop postgresql'
| |
| − | # repmgr['service_reload_command'] = '/opt/gitlab/bin/gitlab-ctl hup postgresql'
| |
| − | # repmgr['service_restart_command'] = '/opt/gitlab/bin/gitlab-ctl restart postgresql'
| |
| − | # repmgr['service_promote_command'] = nil
| |
| − | # repmgr['promote_command'] = '/opt/gitlab/embedded/bin/repmgr standby promote -f /var/opt/gitlab/postgresql/repmgr.conf'
| |
| − | # repmgr['follow_command'] = '/opt/gitlab/embedded/bin/repmgr standby follow -f /var/opt/gitlab/postgresql/repmgr.conf'
| |
| − | | |
| − | # repmgr['upstream_node'] = nil
| |
| − | # repmgr['use_replication_slots'] = false
| |
| − | # repmgr['loglevel'] = 'INFO'
| |
| − | # repmgr['logfacility'] = 'STDERR'
| |
| − | # repmgr['logfile'] = nil
| |
| − | | |
| − | # repmgr['event_notification_command'] = nil
| |
| − | # repmgr['event_notifications'] = nil
| |
| − | | |
| − | # repmgr['rsync_options'] = nil
| |
| − | # repmgr['ssh_options'] = nil
| |
| − | # repmgr['priority'] = nil
| |
| − | #
| |
| − | # HA setting to specify if a node should attempt to be master on initialization
| |
| − | # repmgr['master_on_initialization'] = true
| |
| − | | |
| − | # repmgr['retry_promote_interval_secs'] = 300
| |
| − | # repmgr['witness_repl_nodes_sync_interval_secs'] = 15
| |
| − | # repmgr['reconnect_attempts'] = 6
| |
| − | # repmgr['reconnect_interval'] = 10
| |
| − | # repmgr['monitor_interval_secs'] = 2
| |
| − | # repmgr['master_response_timeout'] = 60
| |
| − | # repmgr['daemon'] = true
| |
| − | # repmgrd['enable'] = true
| |
| − | | |
| − | ################################################################################
| |
| − | # Patroni (EE only)
| |
| − | #
| |
| − | # NOTICE: Patroni is an experimental feature and subject to change.
| |
| − | #
| |
| − | ################################################################################
| |
| − | # patroni['enable'] = false
| |
| − | | |
| − | # patroni['dir'] = '/var/opt/gitlab/patroni'
| |
| − | # patroni['data_dir'] = '/var/opt/gitlab/patroni/data'
| |
| − | # patroni['ctl_command'] = '/opt/gitlab/embedded/bin/patronictl'
| |
| − | | |
| − | ## Patroni dynamic configuration settings
| |
| − | # patroni['loop_wait'] = 10
| |
| − | # patroni['ttl'] = 30
| |
| − | # patroni['retry_timeout'] = 10
| |
| − | # patroni['maximum_lag_on_failover'] = 1_048_576
| |
| − | # patroni['max_timelines_history'] = 0
| |
| − | # patroni['master_start_timeout'] = 300
| |
| − | # patroni['use_pg_rewind'] = true
| |
| − | # patroni['remove_data_directory_on_rewind_failure'] = false
| |
| − | # patroni['remove_data_directory_on_diverged_timelines'] = false
| |
| − | # patroni['use_slots'] = true
| |
| − | # patroni['replication_password'] = nil
| |
| − | # patroni['replication_slots'] = {}
| |
| − | | |
| − | ## Standby cluster replication settings
| |
| − | # patroni['standby_cluster']['enable'] = false
| |
| − | # patroni['standby_cluster']['host'] = nil
| |
| − | # patroni['standby_cluster']['port'] = 5432
| |
| − | # patroni['standby_cluster']['primary_slot_name'] = nil
| |
| − | | |
| − | ## Global/Universal settings
| |
| − | # patroni['scope'] = 'gitlab-postgresql-ha'
| |
| − | # patroni['name'] = nil
| |
| − | | |
| − | ## Log settings
| |
| − | # patroni['log_directory'] = '/var/log/gitlab/patroni'
| |
| − | # patroni['log_level'] = 'INFO'
| |
| − | | |
| − | ## Consul specific settings
| |
| − | # patroni['consul']['url'] = 'http://127.0.0.1:8500'
| |
| − | # patroni['consul']['service_check_interval'] = '10s'
| |
| − | # patroni['consul']['register_service'] = true
| |
| − | # patroni['consul']['checks'] = []
| |
| − | | |
| − | ## PostgreSQL configuration override
| |
| − | # patroni['postgresql']['hot_standby'] = 'on'
| |
| − | | |
| − | ## The following must hold the same values on all nodes.
| |
| − | ## Leave unassined to use PostgreSQL's default values.
| |
| − | # patroni['postgresql']['wal_level'] = 'replica'
| |
| − | # patroni['postgresql']['wal_log_hints'] = 'on'
| |
| − | # patroni['postgresql']['max_worker_processes'] = 8
| |
| − | # patroni['postgresql']['max_locks_per_transaction'] = 64
| |
| − | # patroni['postgresql']['max_connections'] = 200
| |
| − | # patroni['postgresql']['checkpoint_timeout'] = 30
| |
| − | | |
| − | ## The following can hold different values on all nodes.
| |
| − | ## Leave unassined to use PostgreSQL's default values.
| |
| − | # patroni['postgresql']['wal_keep_segments'] = 8
| |
| − | # patroni['postgresql']['max_wal_senders'] = 5
| |
| − | # patroni['postgresql']['max_replication_slots'] = 5
| |
| − | | |
| − | ## Permanent replication slots for Streaming Replication
| |
| − | # patroni['replication_slots'] = {
| |
| − | # 'geo_secondary' => { 'type' => 'physical' }
| |
| − | # }
| |
| − | | |
| − | ## The address and port that Patroni API binds to and listens on.
| |
| − | # patroni['listen_address'] = nil
| |
| − | # patroni['port'] = '8008'
| |
| − | | |
| − | ## The address of the Patroni node that is advertized to other cluster
| |
| − | ## members to communicate with its API and PostgreSQL. If it is not specified,
| |
| − | ## it tries to use the first available private IP and falls back to the default
| |
| − | ## network interface.
| |
| − | # patroni['connect_address'] = nil
| |
| − | | |
| − | ## The port that Patroni API responds to other cluster members. This port is
| |
| − | ## advertized and by default is the same as patroni['port'].
| |
| − | # patroni['connect_port'] = '8008'
| |
| − | | |
| − | | |
| − | ################################################################################
| |
| − | # Consul (EEP only)
| |
| − | ################################################################################
| |
| − | # consul['enable'] = false
| |
| − | # consul['dir'] = '/var/opt/gitlab/consul'
| |
| − | # consul['username'] = 'gitlab-consul'
| |
| − | # consul['group'] = 'gitlab-consul'
| |
| − | # consul['config_file'] = '/var/opt/gitlab/consul/config.json'
| |
| − | # consul['config_dir'] = '/var/opt/gitlab/consul/config.d'
| |
| − | # consul['data_dir'] = '/var/opt/gitlab/consul/data'
| |
| − | # consul['log_directory'] = '/var/log/gitlab/consul'
| |
| − | # consul['env_directory'] = '/opt/gitlab/etc/consul/env'
| |
| − | # consul['env'] = {
| |
| − | # 'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
| |
| − | # }
| |
| − | # consul['monitoring_service_discovery'] = false
| |
| − | # consul['node_name'] = nil
| |
| − | # consul['script_directory'] = '/var/opt/gitlab/consul/scripts'
| |
| − | # consul['configuration'] = {
| |
| − | # 'client_addr' => nil,
| |
| − | # 'datacenter' => 'gitlab_consul',
| |
| − | # 'enable_script_checks' => true,
| |
| − | # 'server' => false
| |
| − | # }
| |
| − | # consul['services'] = []
| |
| − | # consul['service_config'] = {
| |
| − | # 'postgresql' => {
| |
| − | # 'service' => {
| |
| − | # 'name' => "postgresql",
| |
| − | # 'address' => '',
| |
| − | # 'port' => 5432,
| |
| − | # 'checks' => [
| |
| − | # {
| |
| − | # 'script' => "/var/opt/gitlab/consul/scripts/check_postgresql",
| |
| − | # 'interval' => "10s"
| |
| − | # }
| |
| − | # ]
| |
| − | # }
| |
| − | # }
| |
| − | # }
| |
| − | # consul['watchers'] = {
| |
| − | # 'postgresql' => {
| |
| − | # enable: false,
| |
| − | # handler: 'failover_pgbouncer'
| |
| − | # }
| |
| − | # }
| |
| − | ################################################################################
| |
| − | # Service desk email settings (EEP only)
| |
| − | ################################################################################
| |
| − | ### Service desk email
| |
| − | ###! Allow users to create new service desk issues by sending an email to
| |
| − | ###! service desk address.
| |
| − | ###! Docs: https://docs.gitlab.com/ee/administration/reply_by_email.html
| |
| − | # gitlab_rails['service_desk_email_enabled'] = false
| |
| − | | |
| − | #### Service Desk Mailbox Settings (via `mail_room`)
| |
| − | #### Service Desk Email Address
| |
| − | ####! The email address including the `%{key}` placeholder that will be replaced
| |
| − | ####! to reference the item being replied to.
| |
| − | ####! **The placeholder can be omitted but if present, it must appear in the
| |
| − | ####! "user" part of the address (before the `@`).**
| |
| − | # gitlab_rails['service_desk_email_address'] = "contact_project+%{key}@gmail.com"
| |
| − | | |
| − | #### Service Desk Email account username
| |
| − | ####! **With third party providers, this is usually the full email address.**
| |
| − | ####! **With self-hosted email servers, this is usually the user part of the
| |
| − | ####! email address.**
| |
| − | | |
| − | | |
| − | #### Service Desk Email account password
| |
| − | # gitlab_rails['service_desk_email_password'] = "[REDACTED]"
| |
| − | | |
| − | ####! The mailbox where service desk mail will end up. Usually "inbox".
| |
| − | # gitlab_rails['service_desk_email_mailbox_name'] = "inbox"
| |
| − | ####! The IDLE command timeout.
| |
| − | # gitlab_rails['service_desk_email_idle_timeout'] = 60
| |
| − | ####! The file name for internal `mail_room` JSON logfile
| |
| − | # gitlab_rails['service_desk_email_log_file'] = "/var/log/gitlab/mailroom/mail_room_json.log"
| |
| − | | |
| − | #### Service Desk IMAP Settings
| |
| − | # gitlab_rails['service_desk_email_host'] = "imap.gmail.com"
| |
| − | # gitlab_rails['service_desk_email_port'] = 993
| |
| − | # gitlab_rails['service_desk_email_ssl'] = true
| |
| − | # gitlab_rails['service_desk_email_start_tls'] = false
| |
| − | | |
| − | </pre>
| |
| | | | |
| | == Related terms == | | == Related terms == |
