Difference between revisions of "Cisco IOS: show ip route"
Jump to navigation
Jump to search
| Line 17: | Line 17: | ||
== See also == | == See also == | ||
| + | * {{VLAN}} | ||
* {{route}} | * {{route}} | ||
* {{IOS}} | * {{IOS}} | ||
Revision as of 07:44, 16 August 2020
show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, m - OMP
n - NAT, Ni - NAT inside, No - NAT outside, Nd - NAT DIA
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
H - NHRP, G - NHRP registered, g - NHRP registration summary
o - ODR, P - periodic downloaded static route, l - LISP
a - application route
+ - replicated route, % - next hop override, p - overrides from PfR
Gateway of last resort is 10.10.10.254 to network 0.0.0.0 .../...
See also
- VLAN, VTP, VLAN Access-List (VACL), IOS: Create a VLAN, Change vlan configuration,
show vlan,show vlan brief,show vlan summary,show vtp status,switchport,set vlan,vtp mode transparent route, IOS:show ip route, PAN-OS:show routing route,route add,route del- Cisco IOS: Cisco IOS XE, Config (mode), VLANs, Cisco IOS logging, VTP, ACLs,
show logging,show logging history,show interface status,debug,archive,show archive,conf t,int,ip http server,ip ssh,ip address, vty,show mac address-table,show access-list, Access-list,ip access-group,admin
Advertising:
