Lsscsi

lsscsi
[0:0:0:0]    disk    Generic- SD/MMC CRW       1.00  /dev/sda
[1:0:0:0]    disk    NETAPP   LUN C-Mode       9600  /dev/sdd
[1:0:0:1]    disk    NETAPP   LUN C-Mode       9600  /dev/sdl
[1:0:0:7]    disk    NETAPP   LUN C-Mode       9600  /dev/sde
[1:0:1:0]    disk    NETAPP   LUN C-Mode       9600  /dev/sdf
[1:0:1:1]    disk    NETAPP   LUN C-Mode       9600  /dev/sdm
[1:0:1:7]    disk    NETAPP   LUN C-Mode       9600  /dev/sdg
[2:0:0:0]    enclosu HPE      Smart Adapter    1.66  -
[2:1:0:0]    disk    HPE      LOGICAL VOLUME   1.66  /dev/sdb
[2:1:0:1]    disk    HPE      LOGICAL VOLUME   1.66  /dev/sdc
[2:2:0:0]    storage HPE      P408i-a SR Gen10 1.66  -
[3:0:0:0]    disk    NETAPP   LUN C-Mode       9600  /dev/sdh
[3:0:0:1]    disk    NETAPP   LUN C-Mode       9600  /dev/sdn
[3:0:0:7]    disk    NETAPP   LUN C-Mode       9600  /dev/sdi
[3:0:1:0]    disk    NETAPP   LUN C-Mode       9600  /dev/sdj
[3:0:1:1]    disk    NETAPP   LUN C-Mode       9600  /dev/sdo
[3:0:1:7]    disk    NETAPP   LUN C-Mode       9600  /dev/sdk

See also

• Block devices: blkid (UUID), lshw -class disk, hwinfo --disk, udevadm, rescan-scsi-bus.sh, LUN, hdparm, findfs, Add a new disk
• lsblk, pvscan lspci, lsscsi, smartctl, fdisk, parted, Kpartx, pvdiplay, pvs, udisksctl, /dev/sd, nvme list
• Fibre Channel: HBA, multipath-tools, multipath, multipath -ll, /etc/multipath.conf multipathd rescan-scsi-bus.sh powermt Device mapper dmsetup ls,
• File systems: clustered file system, tune2fs mkfs.ext4,superblock, e2fsck, resize2fs, mount, df, umount, UUID, fstab