Lspci

lspci command list all PCI devices

• lspci
• lspci -v

lspci
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
02:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd Device a808
00:03.0 Ethernet controller: Red Hat, Inc. Virtio network device

lspci
00:00.0 Host bridge: Network Appliance Corporation Device 1275
00:01.0 SATA controller: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 6 port SATA Controller [AHCI mode]
00:01.1 SATA controller: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 6 port SATA Controller [AHCI mode]
00:02.0 Ethernet controller: Red Hat, Inc. Virtio network device
00:05.0 Network and computing encryption device: Red Hat, Inc. Virtio RNG
00:1f.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]

Activities

1. Execute lspci command to list your PCI devices
   1. Identify your SATA controllers
2. List your Fibre Channel devices (HBAs): lspci | grep "Fibre Channel" or systool -c fc_host -v

See also

• M.2
• Block devices: blkid (UUID), lshw -class disk, hwinfo --disk, udevadm, rescan-scsi-bus.sh, LUN, hdparm, findfs, Add a new disk
• lsblk, pvscan lspci, lsscsi, smartctl, fdisk, parted, Kpartx, pvdiplay, pvs, udisksctl, /dev/sd, nvme list
• SATA, SAS, ATA
• lsusb
• PCI, PCI DSS, PCIe, lspci, PCI passthrough, NGFF

https://superuser.com/questions/tagged/sata?tab=Votes