Cisco IOS logging

This article is a Draft. Help us to complete it.

Disable logging:

no logging console

Local storage of messages:

Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#logging buffered informational
Router(config)#end

Configure syslog

conf t
logging host xx.xx.xx.xx
logging host X.X.X.X transport udp port 714
logging trap informational

Verify:

sh run | inc logging

Logs

Apr 14 10:18:23.233: %SYS-5-CONFIG_I: Configured from console by vty0 (10.10.10.5)

Related commands

• show logging
• show logging history
• logging enable
• logging host xx.xx.xx.xx
• logging trap LEVEL_TO_SELECT
• logging history
• logging history size number
• logging on and no logging on
• logging console [level]
• logging monitor [level]
• debug ip
• show memory, sh memory platform
• show archive
• show interfaces
• PAN-OS: show log
• no device-tracking logging theft

See also

• Cisco IOS logging: show logging
• Linux logging, Cisco IOS logging
• Cisco IOS: Cisco IOS XE, Config (mode), VLANs, Cisco IOS logging, VTP, ACLs, show logging, show logging history, show interface status, debug, archive, show archive, conf t, int, ip http server, ip ssh, ip address, vty, show mac address-table, show access-list, Access-list, ip access-group, admin