Show interfaces switchport

Name: Gi1/0/47
Switchport: Enabled
Administrative Mode: static access
Operational Mode: down
Administrative Trunking Encapsulation: dot1q
Negotiation of Trunking: Off
Access Mode VLAN: 169 (YOUR_VLAN_NAME)
Trunking Native Mode VLAN: 1 (default)
Administrative Native VLAN tagging: disabled
Voice VLAN: 30 (YOUR_VOICE_VLAN_NAME)
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk Native VLAN tagging: enabled
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk associations: none
Administrative private-vlan trunk mappings: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL

Protected: false
Unknown unicast blocked: disabled
Unknown multicast blocked: disabled
Vepa Enabled: false
Appliance trust: none

Related commands

• show interface status

See also

• Cisco IOS: Cisco IOS XE, Config (mode), VLANs, Cisco IOS logging, VTP, ACLs, show logging, show logging history, show interface status, debug, archive, show archive, conf t, int, ip http server, ip ssh, ip address, vty, show mac address-table, show access-list, Access-list, ip access-group, admin