Smartctl
Jump to navigation
Jump to search
apt install smartmontools
smartctl smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-96-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org ERROR: smartctl requires a device name as the final command-line argument. Use smartctl -h to get a usage summary
smartctl -a /dev/sda
smartctl -a /dev/sdb smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-122-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: QEMU HARDDISK Serial Number: QM00003 Firmware Version: 2.5+ User Capacity: 26,843,545,600 bytes [26.8 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000 Local Time is: Sun Oct 25 06:00:24 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 288) seconds. Offline data collection capabilities: (0x19) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0003 100 100 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 16 4 Start_Stop_Count 0x0002 100 100 020 Old_age Always - 100 5 Reallocated_Sector_Ct 0x0003 100 100 036 Pre-fail Always - 0 9 Power_On_Hours 0x0003 100 100 000 Pre-fail Always - 1 12 Power_Cycle_Count 0x0003 100 100 000 Pre-fail Always - 0 190 Airflow_Temperature_Cel 0x0003 069 069 050 Pre-fail Always - 31 (Min/Max 31/31) SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported
See also[edit]
- HDD, S.M.A.R.T., hdparm,
udisksctl, CHS, ata,smartctl, WD Elements Desktop Hard Drive - Block devices:
blkid(UUID),lshw -class disk,hwinfo --disk,udevadm,rescan-scsi-bus.sh,LUN,hdparm,findfs, Add a new disk lsblk,pvscanlspci,lsscsi,smartctl,fdisk,parted,Kpartx,pvdiplay,pvs,udisksctl,/dev/sd, nvme list
Advertising:
