HPE ProLiant

Proliant is a popular x86 brand of server computers sell by HP with advanced features:

• Redundant and hot swappable power supplies
• Disk array controllers with hot swap disks: HPE ProLiant Smart Array Controllers
• Out of Band Management capabilities (HP Integrated Lights-Out or iLO)
• UEFI Secure Boot and Secure Start support
• FIPS 140-2 validation

HP provide drivers a software for managing servers such as Management Component Pack which includes

• HP online configuration utility (hponcfg)
• Agentless Management Service amsd
• Smart Storage Administrator (SSA): ssa
• Smart Storage Administrator (SSA) CLI:ssacli
• Smart Storage Administrator Diagnostic Utility (SSADU) CLI: ssaducli.

To install them follow installation instructions: apt-get install hponcfg amsd ssa ssacli ssaducli

Binaries provides by amsd package: amsd_rev amsd smad cpqiScsi smad_rev ahslog mr_cpqScsi

Models

• DL380 (up to 2 processors)
• DL580 (up to 4 processors). See also Dell PowerEdge R940.
• DL980
• Lenovo ThinkSystem SR950 (up to 8 processors, up to 28x cores per processor. Total: 224 cores)

Timeline

https://en.wikipedia.org/wiki/ProLiant#Timeline

• 2017 Gen 10
• 2014 Gen 9
• 2012 Gen 8

Related terms

• Primary Riser, Secondary Riser
• HPE Synergy
• HPE Fast Fault Tolerance, A3DC
• HPE ProLiant Smart Array Controllers

Activities

1. Read about different Proliant models and other competitors such as: Dell, IBM or Supermicro.
2. Identify characteristics of most popular models: DL380 (up to 2 CPUs/24-DIMM slots) and DL580.
   1. Read DL380 Gen10 QuickSpecs: https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00008180enw
   2. Read DL380 Gen10 User Guide: https://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-a00019109en_us-11.pdf
   3. Read HP iLO User Guide: https://support.hpe.com/hpsc/doc/public/display?docId=a00074744en_us
3. Install latest LTS Ubuntu Server and install HP Management Component Pack
4. Use your browser to /Access to iLO/
5. /Remove a disk from your redundant storage array and review OS logs/ and verify output from ssacli ctrl slot=0 pd all show status
6. Read page about HPE ProLiant Smart Array Controllers
7. Enter HP Proliant iLO SSA (Smart Storage Administrator) application by pressing F9 and configure your disk array.
8. Learn about UEFI System Utilities User Guide for HPE ProLiant Gen10 https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00016407ja_jp
9. Learn about HPE Agentless Management: https://buy.hpe.com/us/en/software/server-management-software/server-ilo-management/ilo-management-engine/hpe-agentless-management/p/5219980
10. Learn about Service Pack for ProLiant (SPP)

See also

• HPE Proliant: HPE ProLiant Smart Array Controllers, iLO, DL380, DL560, DL580, ssacli [ show config | show status | show detail ], POST code, hponcfg, amsd, SPP
• ZFS and LVM
• mdadm Linux utility
• Computing vendors: HPE Proliant, Dell PowerEdge, Lenovo ThinkSystem, Supermicro

Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy.. Source: https://en.wikiversity.org/wiki/System_administration/ProLiant