Hponcfg

hponcfg
HP Lights-Out Online Configuration utility
Version 5.5.0 Date 5/30/2019 (c) 2005,2019 Hewlett Packard Enterprise Development LP

ERROR: CpqCiCreateFunc() 0 time failed.
Driver Error Code:(1,1h).
Driver Error Message: CPQCIDRV driver is not loaded.

ERROR: CpqCiCreateFunc() 1 time failed.
Driver Error Code:(1,1h).
Driver Error Message: CPQCIDRV driver is not loaded.
ERROR:  Could not find the Management Processor Device Node.
	Please check if the iLO driver module is installed and running properly.
	ACTION REQUIRED: Install/Re-install hp Lights-Out driver package('hp-ilo' RPM) for iLO.
FLOCK: Unlock Successful by Process ID [4708]. Time: 11:26:22****

Installation

UBUNTU_CODENAME=$(lsb_release -cs)

apt-get update
apt-get install curl
curl https://downloads.linux.hpe.com/SDR/hpPublicKey2048.pub | apt-key add -
curl https://downloads.linux.hpe.com/SDR/hpPublicKey2048_key1.pub | apt-key add -
curl https://downloads.linux.hpe.com/SDR/hpePublicKey2048_key1.pub | apt-key add -
add-apt-repository 'deb [arch=amd64,i386] http://downloads.linux.hpe.com/SDR/repo/mcp $UBUNTU_CODENAME/current non-free'
add-apt-repository 'deb [arch=amd64,i386] http://downloads.linux.hpe.com/SDR/repo/mcp $UBUNTU_CODENAME/10.80 non-free'
apt-get update
apt-get install amsd
apt-get install hponcfg

Activities

• Read https://support.hpe.com/hpesc/public/docDisplay?docId=c05182284

See also

• HPE Proliant: iLO, iLO RBSU, POST codes, show /system1, show /system1/firmware1
• HPE Proliant: HPE ProLiant Smart Array Controllers, iLO, DL380, DL560, DL580, ssacli [ show config | show status | show detail ], POST code, hponcfg, amsd, SPP
• Ansible hponcfg module: https://docs.ansible.com/ansible/latest/modules/hponcfg_module.html#hponcfg-module
• KVM: virsh console
• Out-of-band management (OOB), iLO, ALOM, Intel AMT, KVM switch, Dell DRAC